···
Log in / Register

What is the minimum ground clearance of the Odyssey?

4 Answers
MirandaAnn
07/29/25 9:54pm

The minimum ground clearance of the Odyssey is 126mm. Here is some additional information: Basic information about the Odyssey: The dimensions of the Odyssey are 4847mm in length, 1820mm in width, and 1702mm in height, with a wheelbase of 2900mm. The minimum ground clearance is 126mm, the front track is 1559mm, and the rear track is 1560mm. It is a five-door, seven-seater MPV. The Odyssey hybrid version is equipped with a 2.0L third-generation i-MMD dual-motor hybrid system, with a maximum power of 158kW at 6200 rpm, a maximum torque of 315Nm at 3500 rpm, and uses a MacPherson strut front suspension.

Was this review help?
17
4
Share
DiJosie
08/15/25 9:35pm

As an Odyssey owner for several years, I can say its minimum ground clearance is around 150mm. It handles smoothly in urban areas, rarely scraping the chassis over speed bumps or small potholes, and maintains good stability on highways without excessive body sway. However, when fully loaded with luggage or passengers, the clearance may drop below 140mm—though still sufficient for city commutes. During heavy rain, I safely navigated deep water sections by driving slowly; the height effectively prevents water ingress into the engine. Regular checks of suspension and tire pressure are advisable, maintaining factory settings to avoid compromising balance. Overall, this practical clearance design suits daily family use, offering reliability and safety.

Was this review help?
1
1
Share
Expand All
DelBeau
10/17/25 6:28am

With over a decade of experience in automotive repair, I've measured the ground clearance of the Odyssey for many clients, typically ranging between 145mm to 150mm depending on the model year and road conditions. Key influencing factors include tire size and suspension status—wider tires may slightly increase clearance, but improper modifications can compromise handling. Insufficient clearance risks undercarriage scraping, while excessive height affects cornering stability. During measurements, we use an incline gauge tool—safe clearance prevents water ingress during flooded road sections. Maintenance advice: avoid altering factory settings; check clearance changes when fully loaded. MPVs prioritize comfort, with this parameter ensuring balanced practicality and passability. A frequent customer question is how to handle rough roads—my answer is simply drive slowly, don't expect off-road performance.

Was this review help?
17
2
Share
Expand All
WilliamDella
11/30/25 7:10am

As a parent of two kids, traveling with the Odyssey is much easier. With a ground clearance of around 150mm, the doors are not too high, making it convenient for the elderly and children to get in. The body slightly lowers when loading a stroller in the trunk, but there's no scraping issue on city roads. It handles gravel roads or small slopes smoothly when driven slowly, and the height is just right for getting in without bending over. Safety is a concern—too low clearance is prone to bumps, while too high is unstable. Last time at a park entrance with a pothole, passing at low speed caused no damage. Daily commuting is comfortable, and the MPV positioning suits families well, with the ground clearance parameter ensuring practical safety. Avoid modifying the suspension—keeping it stock ensures worry-free driving.

Was this review help?
19
0
Share
Expand All
More Forum Discussions

What is the brand of motorcycles used by the National Honor Guard?

The motorcycles used by the National Honor Guard are customized versions of the Zhejiang CFMoto CF650G, equipped with a 650CC twin-cylinder four-stroke fuel-injected water-cooled engine, delivering a maximum power of 52 kilowatts. Introduction to Motorcycle Escort: Motorcycle escort is the highest ceremonial honor and a strict security measure provided by most countries to visiting foreign heads of state, government leaders, and other dignitaries, and it is a common practice in many countries internationally. Formation of the National Honor Guard Motorcycles: The escort team deploys 5 motorcycles in a "V" formation in front of the main guest vehicle, with 2 motorcycles deployed on each side of the main guest vehicle in a double-line formation.
3
2
Share

What are the benefits of modifying a car's exhaust system?

Benefits of modifying a car's exhaust system: 1. Modifying the header: Allows for smoother exhaust flow, making it easier for the car to unleash horsepower during high-speed driving; 2. Modifying the mid-section: Reduces exhaust resistance after modification, thereby improving the vehicle's power performance at high RPMs; 3. Modifying the tail section: Generally involves the muffler, with no significant difference post-modification except for a much louder sound. The car's exhaust system primarily discharges the waste gases produced by the engine while reducing pollution and noise from the exhaust. The car exhaust system is mainly used for light vehicles, compact cars, buses, motorcycles, and other motor vehicles.
11
0
Share

Why can't the car climb up during hill start?

Reasons: Not applying throttle - After the car starts moving on the slope, you need to apply some throttle appropriately, otherwise the car will lack power to climb or even stop; Releasing clutch too quickly - During the hill start test in Subject 2 of the driving test, you should slowly release the clutch until the car vibrates, then release the brake and apply throttle smoothly. Not applying throttle: When the vehicle is climbing a slope, if you don't apply throttle, it's likely that the idle speed won't be sufficient to move the vehicle, causing it to stall. Once the car starts rolling backward, it's almost impossible to avoid stalling. When rolling backward occurs, you must first press the brake and clutch to stop the car completely, then restart. Releasing clutch too quickly: When driving, you should completely release the handbrake and apply throttle gradually. Don't lift the clutch too high - lifting it too high without releasing the handbrake will also cause the engine to stall.
17
5
Share

What Causes Engine Abnormal Noise After Releasing the Throttle?

Possible causes of engine abnormal noise after releasing the throttle: aging or loosening of engine mounts, engine misfire noise, piston slap noise, etc. Aging or loosening of engine mounts: When these engine mounts age or become loose, the engine will vibrate, resulting in abnormal noise; Engine misfire noise: The exhaust gas flow from the vehicle will show obvious intermittency, accompanied by severe shaking of the exhaust pipe, and the abnormal noise from the engine can be clearly heard; Piston slap noise: Due to poor lubrication conditions and excessive wear of pistons and cylinder walls, the clearance tolerance between pistons and cylinder walls exceeds the normal range. During engine operation, the piston skirt impacts the cylinder wall, producing abnormal noise.
3
5
Share

What is the normal tire pressure in cold weather?

In cold weather, the tire pressure should be adjusted based on the standard tire pressure of the car tires, typically increasing it by approximately 0.2 bar. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes heavy steering and tendencies to veer off course, which are detrimental to driving safety; Increases the movement of various parts of the tire, leading to excessive rolling and abnormal heat generation; Reduces the functionality of the cord and rubber, causing delamination or cord breakage, excessive friction with the rim, resulting in damage to the bead area and abnormal wear; Multiplies the friction between the tire and the ground, causing a sharp rise in tire temperature, softening of the tire, and a rapid decrease in strength. High-speed driving may lead to tire blowouts; Increases tire body deformation, making the tire side prone to cracks, and generates flexing movements, leading to excessive heat, promoting rubber aging, fatigue of the cord fabric layer, cord breakage, and also increases the tire's contact area with the ground, accelerating shoulder wear.
14
2
Share

How to remove the spare tire of Toyota Alphard?

Toyota Alphard spare tire removal method: 1. Use the special clip for tire fixing bolt caps to remove the tire fixing bolt caps; 2. Screw the traction rod into the tire fixing bolt wrench and loosen the fixing bolts on the tire in a certain order; 3. Lift the vehicle with a jack, at this time the protrusion on the top of the jack should be aligned with the lifting point until the wheel is off the ground; 4. Unscrew the five tire fixing bolts in a certain order and remove the wheel. The Alphard is a luxury MPV developed by Toyota. In terms of body size, its length, width, and height are 4975mm, 1850mm, and 1945mm respectively.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.