What is the minimum ground clearance of the New Vision?

How to clean the engine at a 4S shop?

The process of cleaning the engine at a 4S shop is as follows: 1. Tools needed: cleaning agent, brush (or a discarded toothbrush), towel, and spray bottle. The biggest sources of pollution in the car engine compartment are dust and mud. If the owner wants to clean the engine compartment by themselves, they can prepare engine cleaning agent, a brush (or a discarded toothbrush), a towel, and a spray bottle. These tools are basically sufficient. 2. Use the cleaning agent for cleaning: Here, it is important to remind everyone not to spray water directly. It is best to use a cleaning agent because the purpose of using the cleaning agent is to remove oil stains in the engine compartment. Therefore, when using it, the owner should focus on spraying the cleaning agent on various parts and then carefully clean them with a small brush. The owner should note that after the operation, they still need to rinse with water bit by bit before air-drying to easily achieve the cleaning purpose. 3. Then use a wet towel: If the owner has plenty of time, they can choose to use a wet towel to clean the engine compartment. This method can also effectively avoid splashing water that may damage related circuits when pouring water. So, carefully cleaning with a wet towel bit by bit works really well. 4. Dry the moisture: If you want the moisture in the compartment to dry faster, you can start the engine after wiping off the moisture and use the heat generated by the engine to dry the moisture attached to the surface. Once the moisture is completely evaporated, the cleaning of the engine compartment is complete.

18

4

Share

What is the timing alignment mnemonic for car engines?

The timing alignment mnemonic for car engines involves aligning the marks on the crankshaft timing pulley with the crankshaft, typically requiring the No. 1 cylinder piston to be at top dead center. Then, align the marks on the camshaft timing pulley with the camshaft; for dual camshafts, align both camshaft positions separately. Finally, install the timing belt/chain correctly. Here is some information about engines: 1. Concept: An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, an internal combustion engine typically converts chemical energy into mechanical energy. 2. Classification: Internal combustion engines, external combustion engines (where fuel burns outside the engine), gas turbines, and jet engines.

17

0

Share

What is the National IV Standard?

National IV Standard is the fourth stage national standard for motor vehicle pollutant emissions. Here is a partial introduction to the National IV emission standard: 1. Introduction: The National IV emission standard is the fourth stage national standard for motor vehicle pollutant emissions. 2. Vehicle emission pollutants: Mainly include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), PM (particulate matter), etc. 3. Purpose: Through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, it aims to control and reduce vehicle emission pollutants below specified limits.

19

5

Share

Has the odometer of a used car been tampered with?

Most used cars have had their odometers rolled back. Here are detailed methods to identify odometer tampering: 1. Check the steering wheel: The reason is simple: the longer a car has been used, the smoother its steering wheel becomes. The areas frequently touched by hands not only develop a patina but also show worn-out patterns. If a car's steering wheel patterns are completely worn out, the vehicle's mileage is conservatively estimated to be around 100,000 kilometers. 2. Examine the gear shift: Like the steering wheel, the gear shift is constantly used during operation. The smoother the gear shift appears, the longer the car has been in use. If the gear shift is very smooth but the odometer shows very low mileage, it can be basically concluded that the car's odometer has been tampered with. Be very cautious when considering such a purchase! 3. Inspect the foot pedals: The foot pedals are actually the easiest to observe. For vehicles with long service life and high mileage, the wear on the pedals is easily noticeable. If the pedal mats are severely worn, it can also be concluded that the vehicle has been used for a long time and has high mileage.

12

4

Share

What to Do If a Piece of the Tire's Tread Is Chipped Off?

Tire's tread chipped off a piece of rubber can still be used, just take it to a professional repair shop for patching. Relevant information is as follows: 1. The role of tires: Car tires are one of the important components of a vehicle, directly in contact with the road surface, working together with the car's suspension to mitigate the impact received during driving, ensuring good adhesion between the wheels and the road surface, improving the vehicle's traction, braking, and passability, and bearing the weight of the car. 2. Five situations requiring tire replacement: (1) Each tire has a production date; pay attention to the tire's service life and mileage. Exceeding this period or mileage requires tire replacement. (2) Severe tread wear. (3) Whether the tire has bubbles. (4) Abnormal tire pressure; high tire pressure makes braking difficult to control, while low tire pressure results in insufficient vehicle power. Check tire pressure before driving. (5) Whether the tire has cuts.

2

1

Share

What should I pay attention to when going for my first car maintenance?

Make an appointment with the 4S store in advance, and be sure to bring your driver's license, maintenance manual, and warranty manual. Record any daily abnormalities and problems and inform the staff. Here is more information about car maintenance: 1. Maintenance frequency: The first maintenance should be done at 3,000 to 5,000 kilometers. After the first maintenance, it needs to be maintained every 7,000 to 10,000 kilometers. Some cars require maintenance every 5,000 kilometers. 2. Maintenance advantages: Restore the vehicle's performance to the best condition, prevent small problems from becoming big problems, ensure the safety of the vehicle, as well as better economy and longer service life.

7

2

Share

What is the minimum ground clearance of the New Vision?

How to clean the engine at a 4S shop?

What is the timing alignment mnemonic for car engines?

What is the National IV Standard?

Has the odometer of a used car been tampered with?

What to Do If a Piece of the Tire's Tread Is Chipped Off?

What should I pay attention to when going for my first car maintenance?

What Causes Windshield Wipers to Not Clean Properly?

What is the essential difference between Toyota Genuine 5w20 and 0w20?

What Brand is the Horse Carriage Logo?

What formats does a car CD support?