···
Log in / Register

What is the minimum ground clearance of the MG HS?

3 Answers
AndersonLynn
07/29/25 8:47pm
The minimum ground clearance of the MG HS is 175 millimeters. The minimum ground clearance of the MG HS refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance for the MG HS improves its off-road capability, but if the ground clearance is too high, the stability at high speeds will decrease. The design of the MG HS began in 2008, with dimensions of 4574 mm in length, 1876 mm in width, 1664 mm in height, and a wheelbase of 2720 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while that of SUVs ranges between 200 mm and 250 mm. However, the ground clearance of the MG HS is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the MG HS's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance may be preferred to avoid scraping or damaging the undercarriage.
Was this review help?
6
0
Share
McAngela
08/14/25 6:17pm
I've been driving the MG HS for two years now. The official ground clearance data is around 180mm. I measured it myself with one person and luggage loaded, and it was about 170+ mm. It's slightly better when empty. Driving on urban bumpy roads, I never worry about scraping the undercarriage—it's quite practical. For an SUV, higher ground clearance adds value. Compared to some sedans with only 150mm clearance, the HS has much better passability. During maintenance, it's essential to regularly check the suspension system since poor road conditions can easily wear out shock absorbers and affect clearance. I recommend owners not to overload too much and slow down when going over speed bumps with a full load. Overall, it drives steadily, and even rural dirt roads aren't a problem.
Was this review help?
18
2
Share
Expand All
ODavid
10/16/25 6:36am
Before purchasing the MG HS, I compared many SUVs. During my research, I found its minimum ground clearance is 180mm under standard unladen conditions. This height is crucial—it prevents scraping the undercarriage on rough roads, especially when navigating muddy paths back to my hometown. After buying it, I tested it several times and felt truly secure. Even with three passengers and luggage, the clearance doesn’t drop much. For maintenance, I ensure proper tire pressure since low pressure reduces clearance and can cause issues. Overall, I chose this car for its practicality—ample clearance with a hint of off-road capability.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

Can You Release the Clutch Immediately After Shifting Gears?

You cannot release the clutch immediately after shifting gears. You need to slowly release the clutch pedal. If you release the clutch pedal abruptly, the vehicle may experience significant jerking. The jerking occurs due to the excessive speed difference between the engine flywheel and the clutch disc. After depressing the clutch to downshift, you should press the accelerator pedal with your right foot and then engage the clutch. This helps prevent noticeable jerking after the clutch is engaged. Every time you shift gears, you should quickly depress the clutch pedal all the way to ensure smooth gear shifting. The clutch is located in the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission.
17
3
Share

What causes steering wheel vibration when the car reaches 100 mph?

The reason for steering wheel vibration when the car reaches 100 mph is: an issue with the dynamic balance of the car tires. A car wheel is an assembly consisting of a tire and a rim, but due to manufacturing factors, the mass distribution of this assembly is not uniform. This leads to dynamic imbalance when the wheel rotates at high speeds, causing the driver to feel noticeable steering wheel vibration. To prevent or eliminate this phenomenon, an effective method is to add counterweights to the wheel while it is in motion, correcting the balance at various edges of the wheel. This process is known as dynamic balancing. There are many reasons for wheel dynamic imbalance, including the detachment of balancing lead weights, tire repairs, excessive rim repairs, or a large amount of mud inside the rim.
11
2
Share

What is the suitable tire pressure for the Geely New Vision?

The suitable tire pressure for the Geely New Vision is between 2.4 and 2.5 bar. The standard tire pressure for the vehicle's tires is indicated on the driver and passenger side doors or door frames, fuel tank cap, and inside the trunk, among other places. Tire pressure refers to the air pressure inside the tires. Tire pressure is like the blood pressure of a car, and its level plays a crucial role in the car's performance and power. The Geely Vision is Geely's first mid-level business and family sedan. Its body dimensions are 4599mm in length, 1747mm in width, and 1482mm in height, with a wheelbase of 2615mm. In terms of appearance, the Geely Vision features a meticulously designed exterior, pursuing a high-end, dynamic, and high-quality design style. By perfectly combining strong tension with a fashionable and dynamic tone, it embodies an unforgettable sense of noble grandeur and smooth elegance.
6
3
Share

Why is there no air coming from the car heater?

The reasons for no air coming from the car heater include: 1. Clogged heater core; 2. Thermostat failure; 3. Heater valve malfunction. It is recommended to visit a repair shop for inspection and maintenance. Clogged heater core: The car's heater core can be considered as a miniature version of the engine radiator. Its internal structure contains numerous small coolant passages, similar to the radiator, making it prone to internal blockages. Thermostat failure: A common thermostat issue is failure to open. However, if the heater isn't producing warm air due to thermostat failure, it's usually because the thermostat won't close, known as "thermostat stuck open." Heater valve malfunction: When the heater valve fails, the electronically controlled valve no longer responds to computer commands, remaining stuck in either open, closed, or a fixed position. In this case, no coolant flows through the heater core or the flow becomes uncontrolled, resulting in unregulated heating temperature from the air conditioning system.
7
4
Share

What is the function of a car air conditioning filter?

The function of a car air conditioning filter is to separate solid impurities such as dust, pollen, and abrasive particles from the air, as well as to adsorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc. It has strong and long-lasting moisture adsorption capabilities. The air conditioning filter is a type of filter installed in the car's air conditioning system. It can absorb dust particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, and protect the air conditioning cooling system. When a car is driving with the air conditioning on, it draws in external air into the cabin. However, the air contains various particles such as dust, pollen, soot, abrasive particles, ozone, odors, nitrogen oxides, sulfur dioxide, carbon dioxide, benzene, etc. Without the air conditioning filter, these particles can enter the cabin, contaminating the car's air conditioning and reducing the performance of the cooling system.
15
3
Share

Why is water dripping from the exhaust pipe of a Luxgen car?

Water dripping from the exhaust pipe of a Luxgen car is normal. When there are no other abnormal symptoms in the engine, gasoline completely burns to produce carbon dioxide and gaseous water. The gaseous water condenses in the exhaust pipe to form liquid water, which is then discharged through the exhaust pipe once it reaches a certain amount. Luxgen is an automobile manufacturing company headquartered in Xiaoshan, Hangzhou. Taking the Luxgen U6 as an example, its body dimensions are 4625mm in length, 1825mm in width, and 1600mm in height, with a wheelbase of 2720mm. In terms of appearance, the front face of the Luxgen U6 resembles that of the Luxgen 7, with a distinct crossover style on the sides. From its shape, the U6 SUV combines fashionable design elements with family characteristics. The Luxgen U6 SUV features a fastback-style rear and roof lines similar to those of a coupe.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.