What is the minimum ground clearance of the Mercedes-Benz R320?

1 Answers
MargaretRose
07/30/25 3:11am
The minimum ground clearance of the Mercedes-Benz R320 is 140mm. Introduction to minimum ground clearance: Minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to characterize the car's ability to pass over obstacles such as rocks and tree stumps without collision. Design of the Mercedes-Benz R320: The Mercedes-Benz R320 features front-row driver and passenger seats with wrapping, ventilation, and heating functions. The side doors are also wrapped in soft leather. The middle row is equipped with aviation-style seats that can be moved forward and backward and reclined for rest, allowing passengers to lie down inside the car. The third-row original seats are retained with simple wrapping. When the third row is folded down, the space remains spacious, capable of holding a lot of luggage. The Mercedes-Benz R320 Business model is equipped with a new 3.0T engine, a 4MATIC all-wheel-drive system, a central control screen with navigation, and other configurations.
Was this review help?
15
5
Share
More Forum Discussions

What is the weight of the Mercedes-Benz G-Class?

The weight of the Mercedes-Benz G-Class is 2.5 tons. General weight of cars: A small car weighs 1.5 tons, generally family cars are between 1.2 tons and 1.3 tons, mid-to-high-end cars are around 1.4 tons to 1.6 tons, and heavier ones are between 1.8 tons and 2.0 tons. Excessive body weight can lead to higher fuel consumption, poor handling, slower acceleration, and increased braking distance. Methods to reduce car weight: In terms of materials, use lighter materials such as aluminum alloy and carbon fiber; in design, optimize structural design to reduce the use of excess materials while ensuring structural rigidity, thereby reducing weight and saving costs.
3
5
Share

How to Check the Fuel Gauge on the 10th Generation Accord?

There is a square button at the lower right corner of the steering wheel in the 10th Generation Accord to check the fuel gauge. Below are the relevant instructions for checking the fuel gauge: 1. Check when the vehicle is cool: It must be done when the vehicle is cool. If you have just driven the car or the engine is running, checking at this time is useless. 2. Operation: After pulling out the dipstick for the first time, wipe it clean with a clean tissue, then reinsert it. When you pull out the dipstick for the second time, you can see the oil level on the dipstick. If the oil level is between the upper and lower limits, it means the oil level is normal. The so-called upper and lower limits are usually marked with scales, making it easy to identify.
17
4
Share

Is it okay to be one liter short of transmission fluid?

It is not okay to be one liter short of transmission fluid. If the fluid level is low, it can affect the lubrication and cooling of the transmission, and in severe cases, it may even prevent the transmission from shifting gears. The transmission is a crucial component in a car, responsible for changing speed and torque. Without a transmission, a car cannot operate properly. There are three common types of automatic transmissions in cars: dual-clutch transmission (DCT), automatic transmission (AT), and continuously variable transmission (CVT). A dual-clutch transmission essentially adds an extra set of clutches and gear-shifting control mechanisms compared to a manual transmission. One set of clutches controls the odd-numbered gears, while the other set controls the even-numbered gears. CVT transmissions offer smoother gear shifts. AT transmissions are structurally complex but represent a mature and reliable automatic transmission technology.
2
0
Share

Where is the diagnostic connector of Peugeot 2008?

The diagnostic connector of Peugeot 2008 is located under the cover below the steering wheel, which can be accessed by opening the cover. The car's diagnostic connector, also known as the OBD interface, is the vehicle's self-diagnostic system. When a fault occurs in the car, the onboard computer generates a fault code stored in the OBD. At this time, repair personnel can read it out with professional tools, facilitating the diagnosis of car faults. The Peugeot 2008 is a compact SUV produced by Dongfeng Peugeot. This car offers a choice between a 1.6L naturally aspirated engine and a 1.2L turbocharged engine, and comes with either a 5-speed manual or a 6-speed automatic transmission.
8
4
Share

Where is the diagnostic port located on the Peugeot 307?

The diagnostic port of the Peugeot 307 is located behind the panel under the left side of the driver's dashboard, and this panel is marked with 'OBD'. If you see this panel, simply pull it out to reveal the vehicle's OBD interface. Every car is equipped with an OBD interface, which can be connected to a diagnostic computer. When certain faults occur in the car, technicians can use the diagnostic computer to connect to the car's OBD interface to read fault codes. This model is equipped with a 2.0-liter naturally aspirated engine across the entire lineup, delivering 140 horsepower and a maximum torque of 200 Nm. The maximum torque is achieved at 4,000 rpm, and the maximum power is reached at 6,000 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block.
19
5
Share

Where is the reset button for the Mercedes-Benz interior temperature sensor located?

Mercedes-Benz interior temperature sensor reset button is located on the inner side of the main driver's side air duct. Principle of temperature sensor: The resistance value of a conductor changes with temperature. By measuring its resistance value, the temperature of the measured object can be calculated. Sensors constructed using this principle are called resistance temperature sensors. This type of sensor is mainly used for temperature measurement within the range of -200 to 500 degrees Celsius. The sensor usually consists of three parts: a sensitive element, a conversion element, and a measurement circuit. Function of temperature sensor: Used for automatic control of indoor ambient temperature during heating or cooling. During heating, it is used to control the operation of auxiliary electric heaters.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.