···
Log in / Register

What is the minimum ground clearance of the Mercedes-Benz AMG-A35?

4 Answers
StCatherine
07/23/25 3:38pm
The minimum ground clearance of the Mercedes-Benz AMG-A35 is 160 millimeters. Minimum ground clearance: Minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting plane when the vehicle is fully loaded and stationary. It is used to characterize the car's ability to pass over obstacles such as rocks and tree stumps without collision. Impact of minimum ground clearance on driving: The larger the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, which reduces stability. The smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower the center of gravity, which can increase stability.
Was this review help?
9
2
Share
DeClaire
08/10/25 11:31am
I usually pay close attention to car specifications and know that the Mercedes-AMG A35 has a minimum ground clearance of about 117mm. This number represents the shortest distance from the chassis to the ground, which is quite important because it directly affects the vehicle's passability and stability. For high-performance sedans like this, manufacturers intentionally design them lower to enhance handling, such as reducing sway when taking high-speed turns. However, you need to be more careful when driving normally, especially when encountering speed bumps or poor road conditions, as the 117mm clearance can easily scrape the chassis and cause damage. In practical use, if the car is fully loaded with passengers or luggage, the ground clearance will decrease slightly. So, I think it's best to regularly check the suspension system after buying the car to maintain optimal performance. Overall, this value is quite suitable for city and highway driving but not ideal for off-road conditions.
Was this review help?
5
1
Share
Expand All
VanJudah
09/22/25 5:25am
As a car enthusiast, I've checked the specifications of the Mercedes-AMG A35, and its minimum ground clearance is 117mm. This design enhances stability at high speeds, giving a sensation of flying close to the ground with superb handling. However, in real-world driving, extra caution is needed when encountering high curbs or uneven roads, as the risk of scraping the undercarriage increases, potentially damaging the underbody components. I've also noticed that when carrying large luggage or having more passengers in the back, the clearance slightly decreases. It's advisable to familiarize yourself with the vehicle's clearance capabilities before daily use and choose smoother routes while driving. In summary, the 117mm low center of gravity boosts performance but slightly compromises practicality, making it ideal for drivers who enjoy the thrill of driving.
Was this review help?
3
4
Share
Expand All
StAlejandro
11/05/25 8:45am
I think the Mercedes-AMG A35's minimum ground clearance of 117mm is designed to enhance its sporty DNA. After driving similar models, I found that such a low clearance indeed makes the car more agile in corners with excellent stability. Compared to standard Mercedes models, this figure is significantly lower, but don't worry, it won't affect daily commuting. Just remember to slow down when going over speed bumps to avoid damaging the undercarriage. If you're considering modifications like lowering the suspension, the clearance will be further reduced, so weigh the pros and cons carefully. Overall, this parameter is well-designed for users who prioritize driving pleasure.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

Are New Energy Vehicles Subject to Traffic Restrictions?

New energy vehicles are not subject to traffic restrictions, which include: hybrid electric vehicles, pure electric vehicles, fuel cell electric vehicles, and other new energy vehicles. New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources, integrating advanced technologies in vehicle power control and driving, resulting in advanced technical principles and featuring new technologies and structures. The maintenance methods for new energy vehicles are: 1. Check for paint damage, functionality of lights, aging degree of wiper blades, tire wear, and tire pressure; 2. Replace the air filter; 3. Check and replenish coolant, brake fluid, and windshield washer fluid; 4. Inspect the power system's plug connections and the insulation protection of the wiring.
3
1
Share

Which Volvo engine is used in the Lynk & Co 03?

Here is more information about the Lynk & Co 03 engine: 1. The Lynk & Co 03 is a compact sedan under the Lynk & Co brand, featuring a very distinctive exterior design with high recognition. 2. It is equipped with 1.5T and 2.0T engines. The engine models for the 1.5T variant are JLH-3G15TD and JLH-3G15TDC, while the 2.0T variant's engine comes from Volvo. 3. The engine has a maximum horsepower of 156Ps, a maximum power of 115kW, and a maximum torque of 245Nm, manufactured by Zhejiang Geely Engine Factory.
20
4
Share

What to Do When Brakes Lock Up?

Solutions for locked brakes include: 1. Repairing the internal brake caliper by sanding with sandpaper and applying grease; 2. Replacing the brake caliper if it is faulty; 3. Cleaning the entire braking system and replacing the master cylinder cup; 4. Spraying rust remover or sanding the brake pads and brake drum. Brake lock-up refers to a situation in cars without ABS, where forcefully pressing the brake pedal while driving causes the wheel speed to drop rapidly. When the braking force exceeds the friction between the wheels and the ground, the wheels lock up. The consequences include reduced friction between the tires and the road, leading to dangerous phenomena such as skidding, fishtailing, and sudden spinning.
19
0
Share

Does the Envision have a particulate filter?

The 2020 Envision 1.5T model does not have a particulate filter. Here is more information about particulate filters: 1. A particulate filter is a ceramic filter installed in the exhaust system of diesel engines that captures particulate emissions before they enter the atmosphere. 2. The particulate filter can reduce engine-generated soot by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. 3. If the diesel particulate filter is coated with metals such as platinum, rhodium, or palladium, the black smoke containing carbon particles emitted by the diesel engine enters the particulate filter through a dedicated pipe. After passing through the densely arranged bag-type filters inside, the carbon particles are adsorbed onto the filter made of metal fiber felt.
9
4
Share

Is the Mercedes-Benz C a B-segment car?

Mercedes-Benz C is a B-segment car. The Mercedes-Benz C-Class sedan is positioned as a mid-size car. Among the many models under the Mercedes-Benz brand, this car has won over a large number of consumers with its high aesthetic appeal. As a luxury vehicle, this car excels in both power and space performance. The new Mercedes-Benz C-Class sedan is equipped with an active safety system, intelligent lighting system, preventive safety system, passenger safety protection system, and rescue tools, making it first-class in comfort, refinement, practicality, and safety. The Mercedes-Benz C-Class sedan can take several measures depending on the type and severity of an accident. Hazard warning lights and emergency interior lights are automatically activated, and if necessary, the side windows are partially lowered, and the doors are automatically unlocked.
13
1
Share

Where to Add Radiator Coolant?

Radiator coolant should be added into the car's expansion tank. Open the engine hood, locate the expansion tank (usually spherical in shape), remove the tank cap, and pour in the appropriate amount of radiator coolant. The optimal filling level is between the MAX and MIN marks. Additional information: Radiator coolant should not be mixed with water. Adding water will reduce the coolant's effectiveness by lowering its boiling point (diminishing cooling performance) and raising its freezing point (making it prone to freezing in cold climates). Although radiator coolant contains water, it is specially treated deionized soft water. Regular tap water contains various impurities and ions that can form scale over time, leading to blockages.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.