What is the minimum ground clearance of the KAROQ?

What type of clutch does the Geely Borui use?

Geely Borui uses a wet clutch. As it is equipped with a CVT automatic transmission, it employs a wet clutch to ensure minimal jerking during speed changes. Function of the transmission: The transmission is a mechanism used to alter the speed and torque from the engine. It can fix or change the output and input shafts in steps, also known as a gearbox. The transmission consists of a gear transmission mechanism and a control mechanism, with some vehicles also having a power take-off mechanism. Most transmission mechanisms use ordinary gear transmission, while some use planetary gear transmission. Ordinary gear transmission mechanisms typically employ sliding gears and synchronizers. Introduction to wet clutch: A clutch cooled by oil is called a wet clutch. The cooling oil does not protect the friction plates but ensures smooth and gentle power transmission. Its advantages include a long service life and generally trouble-free operation unless operating procedures are violated, frequently keeping the clutch in a semi-engaged state. Wet clutches are commonly used in automatic transmissions, such as the widely used semi-automatic transmissions.

13

4

Share

Will points be deducted for turning right from a straight lane?

This behavior constitutes driving not in accordance with the prescribed lane and depends on the nature of the road. If driving not in the prescribed lane on highways or urban expressways, the driver will be penalized with 3 demerit points and a fine. If the motor vehicle is driven not in the prescribed lane on roads other than highways or urban expressways, no points will be deducted, but a fine will be imposed. Below is additional information: The general procedure involves investigating, collecting evidence, and making a penalty decision in accordance with laws and regulations for penalties such as fines, temporary suspension, or revocation of the driver's license for individuals, or fines for organizations. Penalty standards: Driving a motor vehicle not in the prescribed lane on roads other than highways or urban expressways will result in no points deducted but a fine. To enter a right-turn auxiliary lane from a straight lane, the driver must first change lanes at an allowed location. Turning directly without changing lanes is a violation. The general procedure for traffic violation penalties includes investigation and evidence collection, notification of the penalty, reasons, basis, and related rights, hearing statements or defenses or holding a hearing, and making a penalty decision.

16

2

Share

Where is the cigarette lighter fuse located in the new Qashqai?

Qashqai cigarette lighter fuse is located inside the cover panel below the left side of the steering wheel. The cigarette lighter is a component found in all vehicles, designed to provide a flame source for smokers. Commonly referred to cigarette lighters can be divided into two types: those that draw power from the vehicle's electrical system, and some manufacturers produce cigarette lighters not for lighting cigarettes but simply for drawing power from the vehicle, which are also called cigar lighters. Precautions for using cigarette lighters are as follows: Unplug external devices after use: When the vehicle starts, external devices connected to the cigarette lighter are prone to burn out due to the impact of high starting current, especially MP3 players and USB drives which are highly susceptible to issues. Therefore, they should be unplugged after use and reinserted only after the vehicle has started. Unplug external devices when turning off the vehicle: Due to different vehicle settings, some cigarette lighter power sources do not turn off when the vehicle is turned off, and many vehicles still have power. Thus, leaving external devices plugged into the cigarette lighter for extended periods can easily lead to unnecessary battery drain.

19

4

Share

What Causes a Car to Catch Fire Spontaneously?

Circuit Aging: The engine compartment of a car is filled with various electronic components and wires. If the insulation of the wires deteriorates and breaks, leading to leakage or short circuits, it can easily spark a fire, causing the vehicle to spontaneously combust. Fuel Line Aging: The car engine compartment is inherently poorly ventilated, and combined with high temperatures from exposure to sunlight and heat generated by various components, the temperature inside the engine compartment can become quite high. If there happens to be a fuel line that is leaking due to aging and damage, it can also very easily lead to a car fire. Lack of Lubrication in the Lubrication System: If the engine's lubrication system is low on oil, the surfaces of the mechanical parts can generate high temperatures due to friction. Combustible materials can then be ignited by heat conduction or radiation, ultimately leading to a fire. However, this situation is more commonly seen in trucks. Improper Modifications: Many car owners like to add various components to their beloved vehicles, such as xenon lights, fog lights, or parking sensors. However, due to non-standard or unprofessional modifications, the wiring can become tangled and connections unstable, leaving a hidden risk for the vehicle to catch fire.

11

0

Share

How to Replace a Car Headlight Assembly?

Here is the method for replacing a car headlight assembly: 1. Removal of the front bumper: First, prop up the engine compartment cover plate. Use a Phillips screwdriver to unscrew the fixing screws on both sides of the car's grille, then use a flathead screwdriver to loosen and pull out the plastic screw in the middle of the grille. 2. Removal of the side screws of the bumper: Use a flathead screwdriver to pry open the fender liner inside the tire, exposing the fixing screws on the side of the bumper. Then, simply loosen them with a Phillips screwdriver. 3. Removal of the fixing screws under the bumper: The operating space under the car's chassis is low and narrow. Use the car's onboard tools to securely support the front wheels. Then, use an M10 Torx or open-end wrench and a Phillips screwdriver to remove the fixing screws, allowing the entire front bumper to be detached. 4. Removal of the headlight connector: The car's front fog lights are attached to the bumper. If the fog light connector wire is long enough, you can simply loosen and lower the front bumper. To remove the fog light connector, just twist it at an angle to release it. 5. Removal of the headlight: The F3 car headlight bracket has a total of 3 fixing screws—two on top and one at the bottom. Use an M10 open-end wrench to loosen the headlight bracket bolts, then unplug the 4 light connectors on the headlight assembly. 6. Installation of the new headlight assembly: Since the 4 connectors on the headlight assembly are all different, simply align them with the sockets and press them in fully. Newly purchased headlight assemblies usually come with bulbs included. 7. Reinstallation of the front bumper: Reinstall the front bumper into place. The car's headlights are like its eyes, and a new set can instantly refresh the appearance of an older vehicle.

16

5

Share

Does the Lavida Have an Electronic Parking Brake?

Lavida is a compact sedan under SAIC Volkswagen. According to the new car plan, the company will launch a new generation model within the year. Netcom Society obtained a set of interior spy photos of the new-generation Lavida. The interior of the new car adopts a brand-new design, with an overall layout adjustment. At the same time, it is equipped with an electronic parking brake to replace the traditional mechanical handbrake, further optimizing the in-car storage space. Introduction to Electronic Parking Brake: The electronic parking brake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both achieving parking braking control through the friction generated between the brake disc and the brake pads. The only difference is that the control method has changed from the previous mechanical handbrake lever to an electronic button. Working Principle of Electronic Parking Brake: The working principle of the electronic parking system is the same as that of the manual mechanical parking brake system, achieving parking through the friction clamping between the brake shoes and the brake drum or between the friction pads and the brake disc. The only difference is that the control method is replaced by electronic buttons and motor actions instead of the original manual operation and mechanical linkage. Therefore, the system is fully named the electronically controlled mechanical parking brake system.

12

1

Share

What is the minimum ground clearance of the KAROQ?

What type of clutch does the Geely Borui use?

Will points be deducted for turning right from a straight lane?

Where is the cigarette lighter fuse located in the new Qashqai?

What Causes a Car to Catch Fire Spontaneously?

How to Replace a Car Headlight Assembly?

Does the Lavida Have an Electronic Parking Brake?

What are the ways to relieve nervousness in Subject 3?

What engine does the Domain Tiger 5 have?

Can I claim insurance for my car's own malfunction?

What engine does the Yuhu 5 use?