What is the minimum ground clearance of the Hyundai Fista?

1 Answers
Caden
07/29/25 5:55pm
The minimum ground clearance of the Hyundai Fista is 160mm. The minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting surface when the car is fully loaded and stationary. It is used to characterize the car's ability to pass obstacles such as stones and tree stumps without collision. In terms of interior, the Fista is based on Hyundai's design style, with clear functional divisions. It is equipped with a floating central control screen, a three-spoke sports steering wheel, and lines carved in the direction of showing a sense of strength, with a significant sports style. The body dimensions of the Hyundai Fista are 4660mm in length, 1790mm in width, and 1425mm in height, with a wheelbase of 2700mm. The Hyundai Fista is front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension. The body structure is of a load-bearing type.
Was this review help?
1
1
Share
More Forum Discussions

How to Adjust the Three Modes of Cayenne?

Cayenne's Sport mode is activated by pressing and holding the Sport-Response button. Cayenne's Natural mode is the default driving mode. Cayenne's Comfort mode is specifically designed for comfort and is activated by pressing and holding the PASM Comfort (COMFORT) button. Below is a detailed introduction to the three modes: 1. Cayenne's Sport Mode: In simple terms, it makes the vehicle more aggressive and powerful, providing more precise steering response on good road surfaces. When Sport mode (SPORT) is selected, the suspension feels firmer, and vibrations from the road are more direct, but body sway after bumps is reduced. All Cayenne models come with the new Sport mode, which recalibrates the throttle for more dynamic opening and closing functions, forces the transmission to start in first gear instead of second, and delays the intervention of the stability management system. 2. Cayenne's Comfort Mode: If the PASM Comfort mode (COMFORT) is selected, the shock absorbers become softer, absorbing road vibrations, but the body may sway slightly. Comfort mode offers a balance of comfort and handling. 3. Cayenne's Natural Mode: Simply put, this mode gives the vehicle some off-road capability while maintaining comfort on highways and the performance of a supercar.
7
0
Share

What are the reasons for the Chevrolet Cavalier not responding when starting?

The Chevrolet Cavalier not responding when starting could be due to insufficient battery starting power, poor quality engine oil, or issues with the starter and its circuits. First, you can check if the battery is low on power by honking the horn. Poor quality engine oil is harder to detect, but if the oil appears cloudy, it should be replaced. Problems with the starter and its circuits may require repair or replacement of the starter. Below are detailed explanations of the specific reasons: 1. If you are in a severely cold region, most cases of the car not responding when starting are caused by insufficient battery starting power. Due to climatic conditions, battery performance significantly declines in winter, and batteries that have been in use for about 3 years and are nearing the end of their lifespan should be replaced promptly. Similarly, engine oil can also be affected; its fluidity is poorer in winter. It is recommended to let the car warm up for a few minutes after starting and avoid high RPMs initially. 2. Issues with the starter and its circuits (from the ignition switch to the starter), with particular attention to the starter's solenoid switch and then the ignition switch. Observe whether the brightness of the dashboard lights changes when starting. If they dim, it indicates the battery is low on power. If there is no change, the issue could be with the starter or the ignition switch located below the key cylinder.
3
1
Share

How to Remove the Elantra Water Pump?

The method to remove the Elantra water pump is as follows: Drain all the coolant, remove the radiator inlet and outlet hoses as well as the bypass hose, take out the heater hose, remove the V-belt and pulley, then unscrew the water pump's fixing bolts to detach the water pump. The repair method for a leaking water pump is as follows: 1. Remove the water pump: First, drain all the antifreeze from the water pump, remove the V-belt, use a special tool to press out the water pump pulley, and then remove the water pump. 2. Disassemble the water pump: Use a special tool to first remove the water pump bearing, then detach the water pump impeller and seal assembly from the bearing. 3. Replace the seal ring, new gasket, new V-belt, and new pulley. 4. Reassemble: Use a special tool to first press the bearing onto the water pump impeller, then press the impeller and seal assembly into their designated positions. Press the water pump bearing onto the pulley seat, ensuring the bearing end face is flush with the housing and the impeller face is 0.1-0.3mm below the pump housing face. 5. Inspection: The assembled water pump's shaft should rotate smoothly, and the bearing should have no noticeable radial play. 6. Refill with new antifreeze.
10
2
Share

How often should the transmission fluid of Volkswagen Teramont X be replaced?

Volkswagen Teramont X transmission fluid should be replaced every 60,000 kilometers. Manual fluid replacement requires 4-6L, while machine circulation replacement requires 9-12L. More details on the Volkswagen Teramont X transmission fluid replacement methods are as follows: 1. Gravity Replacement: Similar to the principle of changing engine oil. After loosening the tightening nut at the bottom of the oil pan, the transmission fluid will automatically flow out from the drain hole. This method is simple but cannot completely drain the transmission fluid. Not all the fluid can be discharged due to mechanical structures with dead corners such as depressions and pits. 2. Machine Circulation Replacement: New transmission fluid is added inside the circulation machine, and the transmission fluid circuit interface is connected to the machine. The function of the circulation machine is to push out the old fluid with the new one, achieving a replacement of old with new. This method cleans the fluid circuit more thoroughly. The more new transmission fluid used in the circulation machine, the cleaner the old fluid will be discharged. Machine circulation replacement of transmission fluid typically uses about 10-15L of fluid each time. The replacement process takes approximately 40-80 minutes. 3. Oil Pan Removal Replacement: This method allows for cleaning the oil filter and flushing the oil pan, solving the problem at its root.
7
1
Share

How to Turn Off the Start-Stop Function in BMW?

To deactivate the BMW automatic start-stop function: The start-stop deactivation button is located on the engine start button. Simply press the "A off" button manually. Typically, the start-stop system is automatically enabled when the ignition is turned on. To disable it, just press the button (note: the illuminated light indicates deactivation). Below is relevant information about the automatic start-stop feature: 1. The engine automatic start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a traffic light) and restarts it when needed to proceed. Its English name is STOPSTART, abbreviated as STT. The STT intelligent fuel-saving system controls the engine's start and stop operations. 2. It is advisable to turn off the automatic start-stop in the following scenarios: Avoid using it on slopes—if the engine fails to restart after releasing the brake, the vehicle may roll backward, so remember to disable it. Additionally, if the air conditioning is set to a very low temperature, it stops cooling when the engine is off. However, if the system detects a significant discrepancy between the cabin temperature and the set value, it may force the engine to restart, rendering the automatic start-stop ineffective. Also, always disable the automatic start-stop when driving through water. For regular city driving, the automatic start-stop can remain active.
7
5
Share

Where is the USB port on the Audi Q7?

The USB ports on the Audi Q7 are located inside the center console armrest, equipped with 2 USB ports and one AUX music interface. These can be used to connect mobile phones, or to connect MP3 players via AUX for music playback or phone connection. The USB ports also support charging functionality, allowing direct connection to mobile phones for charging. Below is some relevant information about the Audi Q7: 1. Exterior: The Audi Q7 adopts a family-style design, featuring a large hexagonal grille on the front face. The chrome-framed grille design appears more flamboyant and is directly connected to the headlights. The 3D air intake grille uses horizontal chrome trim strips, paired with a relatively conventional headlight assembly. The Q7 comes standard with LED headlights across all models, maintaining a classic and understated design. 2. Interior: The interior emphasizes simplicity and a technological feel. The dashboard is equipped with a retractable 8.3-inch floating LCD display (non-touchscreen) and brushed aluminum trim panels. The three-spoke sporty leather multifunction steering wheel includes paddle shifters and up to 14 function buttons for controlling the infotainment system, such as audio selection, activating the voice control system, operating the navigation system, etc. Additionally, there are some programmable function buttons.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.