···
Log in / Register

What is the minimum ground clearance of the Honda Jade?

4 Answers
VonDaniela
07/29/25 10:30pm

The minimum ground clearance of the Honda Jade is 195 millimeters. The minimum ground clearance of the Jade refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance improves the Jade's off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. The Honda Jade is a station wagon produced by Honda, featuring a redesigned front bumper for a more sporty appearance. The dimensions of the Jade are 4667 mm in length, 1775 mm in width, and 1530 mm in height, with a wheelbase of 2760 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the Jade's ground clearance is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the vehicle's load. When selecting a vehicle, ground clearance can be one of the reference factors. The choice depends on the vehicle's intended use and road conditions. For urban driving on well-paved roads, a vehicle with lower ground clearance may offer better stability and comfort. For long-distance travel or driving in areas with poor road conditions, a higher ground clearance is advisable to enhance off-road performance and prevent underbody damage.

Was this review help?
19
3
Share
SanDallas
08/15/25 11:23pm

I've been driving a Honda Jade for quite some time, and I remember the minimum ground clearance is around 120mm. This height is quite worry-free for city driving, as it doesn't scrape the chassis when going over speed bumps or ramps, providing a stable and fuel-efficient ride. Unlike SUVs which are taller, the Jade's chassis design focuses more on comfort and handling, making it very practical for daily commuting. Once on the highway during rain, with some uneven road surfaces, it remained rock steady without any issues. However, if you frequently drive on muddy roads, you need to be careful, as the small clearance can easily get stuck with stones. It's advisable to choose flatter routes and regularly check tire pressure to extend the chassis' lifespan. For urban travel, the Jade is definitely sufficient and well-suited for busy office workers.

Was this review help?
13
4
Share
Expand All
DeEloise
10/18/25 3:20am

As an experienced driver, I know the official minimum ground clearance of the Honda Jade is labeled as 115mm. This value is measured under full load, representing the distance from the lowest point of the chassis to the ground, which affects off-road capability. The Jade is an MPV model, designed more for urban driving. Its 120mm clearance is lower than SUVs but slightly higher than sedans, striking a balance between wind resistance and handling. I modified the suspension to increase the clearance to 140mm, slightly improving off-road performance, but post-modification fuel consumption increased a bit, and the handling isn't as agile as the factory setting. I recommend sticking with the factory setup unless you frequently drive on complex terrain. Avoiding potholes in daily driving can protect the chassis, ensuring it lasts five to ten years without issues.

Was this review help?
10
3
Share
Expand All
SanEvan
12/01/25 4:00am

My family uses the Jade for outings with kids, and its minimum ground clearance is approximately 110 to 130 millimeters. This height makes it easy to enter and exit garages, convenient for children to get on and off, and gives moms peace of mind while driving. It performs well on urban roads, but last time on rural dirt roads, driving slowly prevented scraping the bottom. The Jade's spacious interior and low fuel consumption make it a top choice for families, with its moderate ground clearance ensuring safety and comfort. For long trips, carrying a spare tire and checking the card sleeve for wear is advisable, while daily maintenance is straightforward.

Was this review help?
10
2
Share
Expand All
More Forum Discussions

What are the body dimensions of the RX5?

The body dimensions of the Roewe RX5 are as follows: length 4556mm, width 1855mm, height 1719mm, with a wheelbase of 2700mm. Below is additional information about the Roewe RX5: 1. The RX5 is a compact SUV known for its high aesthetics and affordable price. 2. The RX5 is equipped with a 1.5-liter turbocharged engine across all models, with the engine code 15E4E. 3. The RX5's engine is paired with either a 7-speed dual-clutch transmission or a 6-speed manual transmission. 4. The RX5 features a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
10
4
Share

What are the differences between Honda Avancier 240 and 370?

The differences between Honda Avancier 240 and 370 are: 1. Different transmissions: Honda Avancier 240 uses a CVT transmission; Honda Avancier 370 uses a 9-speed automatic manual transmission. 2. Different horsepower: Honda Avancier 240 has a maximum horsepower of 193ps; Honda Avancier 370 has a maximum horsepower of 272ps. 3. Different power: Honda Avancier 240 has a maximum power of 142kw; Honda Avancier 370 has a maximum power of 200kw. 4. Different torque: Honda Avancier 240 has a maximum torque of 243nm; Honda Avancier 370 has a maximum torque of 370nm.
14
3
Share

Which country does Maxxis tires belong to?

Maxxis tires are from China. The functions of tires are: 1. To support the entire weight of the vehicle and bear the load of the car; 2. To transmit traction and braking torque, ensuring the adhesion between the wheels and the road surface; 3. To reduce and absorb vibrations and impacts during driving, preventing severe vibrations and premature damage to car components; 4. To adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring driving safety, handling stability, comfort, and energy efficiency. The maintenance methods for tires include: 1. Regularly cleaning stones from the tire treads; 2. Reducing exposure of tires to direct sunlight; 3. Timely checking tire pressure; 4. Paying attention to suspension maintenance; 5. Regularly inspecting front wheel alignment; 6. Being mindful of driving habits, choosing road surfaces carefully while driving, avoiding objects that can puncture or scratch tires, and steering clear of chemical spills that may corrode tires.
1
3
Share

How to Adjust Citroen Rearview Mirrors?

Here are the specific adjustment methods for Citroen rearview mirrors: 1. For vertical positioning, align the distant horizon at the center of the mirror. 2. For horizontal positioning, adjust until the car body occupies one-quarter of the mirror surface. Note: When adjusting the vertical position of the right-side mirror, ensure the ground occupies about two-thirds of the mirror surface, while maintaining the car body at one-quarter for horizontal positioning. Below is extended information about rearview mirror functions. Car rearview mirrors are located on both left and right sides of the vehicle's front exterior, as well as inside the car's front cabin. They reflect conditions behind, beside, and below the vehicle, enabling drivers to indirectly observe these areas. Serving as "second eyes," they significantly expand the driver's field of vision.
11
2
Share

What brand is the Jaguar logo?

Jaguar is a British automobile brand. Here is the relevant information: 1. Jaguar is a British luxury car manufacturer. The logo features a leaping "Jaguar" sculpture, which is vigorous, powerful, and visually striking, embodying both the company's name and the power and speed of forward motion, symbolizing the car's ability to roam the world like a jaguar. 2. Jaguar's joint venture in China, "Chery Jaguar Land Rover Automotive Co., Ltd.," was established in November 2012. It is a joint venture between Chery Automobile Co., Ltd. and British Jaguar Land Rover, with a 50:50 ownership ratio, making it the first high-end automobile joint venture between China and the UK.
14
4
Share

What are the steps to unlock the steering wheel of the Nissan Sylphy?

Nissan Sylphy steering wheel unlocking method: Turn the steering wheel left and right while turning the car key, as rotating the steering wheel serves the same function as unlocking. Below is relevant information: 1. The reason for the steering wheel lock is a very basic anti-theft feature of the car. The principle involves a spring controlling a steel pin through the rotation of the key. After the key is removed, any movement of the steering wheel causes the steel pin to snap into a pre-drilled hole, thereby locking the steering wheel to prevent it from turning. 2. Steering wheel lock frequently occurs with novice car owners because, after parking and turning off the engine, they may notice the steering wheel is not straightened and habitually try to adjust it by hand, immediately triggering the anti-theft function. Therefore, after turning off the engine, it is advisable to avoid touching the steering wheel. If straightening is necessary, start the engine to perform the operation.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.