···
Log in / Register

What is the minimum ground clearance of the Honda Haoying?

3 Answers
JaceMarie
07/29/25 7:15pm
The minimum ground clearance of the Honda Haoying is 208 millimeters. The minimum ground clearance of the Honda Haoying refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which is used to characterize the vehicle's ability to pass over obstacles such as rocks and stumps without collision. The higher the ground clearance of the Honda Haoying, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds will decrease. The Honda Haoying is a compact SUV under GAC Honda. The dimensions of the four-wheel-drive version of the Honda Haoying are 4634 mm in length, 1855 mm in width, 1689 mm in height, with a wheelbase of 2660 mm. The two-wheel-drive version measures 4634 mm in length, 1855 mm in width, 1679 mm in height, with a wheelbase of 2661 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the Honda Haoying is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the load variations of the Honda Haoying. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. If the vehicle is frequently used in remote areas or on poor road conditions, a higher ground clearance may be preferred to avoid scraping or damaging the undercarriage, considering the vehicle's off-road performance.
Was this review help?
14
1
Share
SanAthena
08/14/25 1:42pm
My Honda Haoying has been in use for several years, with a minimum ground clearance of about 185mm, which is quite practical for daily commuting. Driving in the city, I rarely scrape the undercarriage when going over curbs or entering parking lot ramps, and it handles suburban roads well too. It's not as tall as hardcore off-road vehicles, but as an SUV, it strikes a good balance, offering much better passability than sedans. During regular maintenance, it's important to check the chassis bolts and suspension to prevent dirt buildup and rust from affecting the height. The Haoying's design leans towards comfort, with a moderate height that makes it easy for kids to get in during family outings, and its open visibility reduces blind spots. Avoid reckless off-roading to protect the body. Overall, it's very durable and suitable for everyday driving by ordinary people like us.
Was this review help?
14
5
Share
Expand All
EmilianoDella
10/15/25 4:09am
Measuring a vehicle's ground clearance is the distance from the lowest point of the undercarriage to the ground. The Honda Haoying has a standard value of approximately 185mm, which is above average among urban SUVs. The main factors affecting this height are the suspension system, tire size, and aftermarket accessories. I often help people inspect their cars in the garage and remind them to regularly clean dirt from the undercarriage to prevent gravel scratches. Switching to larger tires may increase height but affect fuel consumption. The Haoying's balanced design ensures driving stability and off-road capability, offering more comfort and higher safety ratings than vehicles with higher ground clearance. Don't neglect regular inspections, especially during rainy seasons when roads are slippery.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

Where to Place the Jack When Changing a Car Tire?

When changing a car tire, the jack should be placed on the raised position of the side rail near the tire being replaced. Below are the steps for removing a tire with a jack: 1. For this raised position, it is usually two layers. Engage the grooved end of the jack with it. Before lifting, it is best to loosen the nuts of the tire to be removed by one turn before raising the jack; 2. Replace the spare tire: Loosen the hub nuts but do not remove them. Place the jack under the car at the corresponding position and use the lever to turn the jack bearing to raise the car; 3. Remove the hub nuts, install the spare tire, tighten the nuts, then lower the car to the ground, remove the jack, and fully tighten the nuts.
10
3
Share

Is the BMW X2 Imported or Domestically Produced?

The BMW X2 is available in both imported and domestically produced versions. Below is an introduction to the differences between the imported and domestically produced BMW X2, as well as its powertrain. Differences between the imported and domestically produced BMW X2: Compared to the imported version, the BMW X2's touchscreen infotainment display has been upgraded from 8.8 inches to 10.25 inches, and the system now includes Baidu Carlife smartphone integration. The domestically produced BMW X2 also adds integrated M sport seats, which better suit its sporty positioning in terms of both design and support. Powertrain of the BMW X2: The BMW X2 is equipped with two engine options: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter version delivers a maximum horsepower of 140 hp, while the 2.0-liter version offers 192 hp. Transmission options include a 7-speed dual-clutch and an 8-speed automatic.
2
4
Share

What is the fuel tank capacity of the 7th generation Elantra?

The fuel tank capacity of the 7th generation Elantra is 47 liters, as officially announced. The 7th generation Elantra uses 92-octane gasoline, with a fuel consumption of 5.2 to 5.4L per 100 kilometers. A full tank can provide a driving range of 870 to 904 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. The fuel level is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel while driving. During the actual refueling process, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
1
1
Share

What Causes a Radiator to Burst?

There are many reasons that can cause a radiator to burst. Below are detailed causes and their corresponding solutions: 1. Cooling Fan Not Working: The cooling fan is controlled by a temperature switch or, in some cases, by a water temperature sensor. 2. Insufficient Coolant: High-end vehicles require the use of antifreeze throughout the year. 3. Thermostat Failure: A temperature difference on both sides of the thermostat causes it to open accurately in response to water temperature. 4. Radiator Blockage: External blockages should be removed using water or air to clear debris. 5. Water Pump Malfunction: A slipping or jammed impeller can cause the timing belt to break. 6. Cylinder Erosion: When the combustion chamber and water channel are compromised, water or white smoke may be discharged from the drain pipe, leading to frequent coolant loss.
1
5
Share

How Long Is the Validity Period of a Driving Permit?

The validity period of a driving permit is three years. Below are the relevant details: 1. After passing the subject one test, the vehicle management office should issue a learning driving permit within one day. The learning driving permit is valid for three years, and the applicant must complete subject two and subject three tests within this period. 2. If the tests are not completed within the validity period, the results of any passed subjects will be invalidated. 3. Extensions cannot be applied for. If the candidate fails to pass all driving license tests within the validity period, the public security department will cancel the candidate's student record, and the candidate must re-register for training and start the tests from the beginning.
6
2
Share

Where is the air conditioning filter for Audi A5 located?

The air conditioning filter for Audi A5 is located under the right front rain tray of the windshield. Generally, the car's air conditioning filter should be replaced every 10,000-15,000 kilometers or once a year. The following are the functions of the Audi A5 air conditioning filter: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. It separates solid impurities such as dust, pollen, and abrasive particles from the air. 3. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and long-lasting moisture adsorption. 4. It prevents the car windows from fogging up, ensuring clear visibility for drivers and passengers and safe driving. It provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety. It also effectively sterilizes and deodorizes.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.