···
Log in / Register

What is the minimum ground clearance of the Honda Accord?

3 Answers
LeonardoFitz
07/29/25 12:22pm
" The minimum ground clearance of the Accord is 100 mm. The minimum ground clearance of the Accord refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. If the Accord's ground clearance is higher, its off-road capability improves. However, if the ground clearance is too high, the stability at high speeds may decrease. The design of the Accord began in 1997, with dimensions of 4906 mm in length, 1862 mm in width, and 1449 mm in height, and a wheelbase of 2830 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the Accord's ground clearance is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Accord's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. If the vehicle is frequently used in remote areas or on rough terrain, a higher ground clearance may be preferable to avoid scraping or damaging the undercarriage, considering the vehicle's off-road performance. "
Was this review help?
16
0
Share
MadelynRose
08/13/25 11:18pm
As a frequent driver, I recall that the Honda Accord typically has a minimum ground clearance of around 130 millimeters, which is approximately 5 inches. This figure is quite crucial for daily driving, especially when encountering potholes or speed bumps in urban or suburban areas—the height is just right to avoid scraping the undercarriage. Having tested both older and newer models, I've noticed that the 2023 hybrid version might be slightly lower, around 100+ mm, but overall, it remains within a reasonable range. As a sedan, the Accord's ground clearance strikes a balance between comfort and passability. It feels stable at highway speeds—lower than an SUV but significantly higher than a sports car. It handles rural dirt roads and small inclines without issue, though you should be cautious when climbing curbs while parking in the city. Over long-term use, tire wear or suspension deformation might affect the clearance height, so it's advisable to check it during every maintenance visit.
Was this review help?
4
4
Share
Expand All
LaEvan
10/09/25 3:22am
From a family car perspective, ground clearance is crucial for daily practicality. The Honda Accord has a standard clearance of around 130mm. After driving it for several years, I found this height ideal for helping elderly or children get in and out effortlessly. When passing over uneven surfaces like speed bumps, the body vibration is minimal, providing good comfort. Compared to the Toyota Camry's 135mm, the Accord is slightly lower but has well-balanced suspension stiffness. In terms of safety, the 130mm clearance helps prevent oil pan scraping, reducing damage risks. Different versions like hybrids may vary by a few millimeters, but it doesn’t affect the overall experience.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

What does TCS mean in cars?

TCS in cars stands for Traction Control System, which consists of: engine control unit (ECU), transmission control unit (TCU), ABS control unit, and wheel speed sensors. The working principle of TCS is: 1. When the TCS control unit detects wheel slip (driven wheel speed higher than other wheels), it notifies the engine control unit; 2. The engine control unit reduces throttle opening to decrease power output and adjusts ignition timing; 3. After the engine control unit reduces fuel injection to decrease power, the transmission control unit forces upshifts to reduce driving force; 4. The ABS pump solenoid valves activate to apply braking force to the slipping wheels, eliminating tire slip.
3
3
Share

How many body colors does the Jetta VS5 have?

The Jetta VS5 is available in five body colors, which are Polar White, Lemon Gold, Moonlight Silver, Incense Gray, and Agate Red. Taking the 2019 Jetta VS5 Manual Progressive model as an example, its body dimensions are: length 4419mm, width 1841mm, height 1616mm, with a wheelbase of 2630mm, a fuel tank capacity of 51 liters, and a trunk capacity of 450 liters. The 2019 Jetta VS5 Manual Progressive model features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm.
19
5
Share

Should You Start an Automatic Transmission Car in P or N Gear?

Automatic transmission cars should be started in P gear because the vehicle's ignition logic defaults to starting in P gear, and the car cannot be started in N gear. The electronic parking brake is automatically engaged when in P gear. The steps to start an automatic transmission car are: 1. Turn the key to the power position; 2. Press the foot brake and shift the gear from P to N; 3. Release the foot brake and turn the key to the ignition position to start the engine; 4. Press the foot brake, release the handbrake, and shift the gear from N to D; 5. Release the foot brake. Automatic transmission cars have gears P, R, N, D, S, and L, and they work by using planetary gear mechanisms to automatically shift gears based on the degree of throttle pedal pressure and changes in vehicle speed.
4
2
Share

Where is the bumper located?

The bumper is located at the front and rear of the vehicle, consisting of an outer panel, cushioning material, and a crossbeam. Common failure modes of bumpers include: 1. Cracking or fissures; 2. Deformation or softening of appearance; 3. Surface crazing, powdering, and fading; 4. Loose product assembly; 5. Excessive gaps and misalignment with surrounding components after assembly; 6. Formation of sink marks on the bumper; 7. Fracture of the side brackets on the front bumper. Maintenance methods for bumpers are: 1. Install corner rubber to reduce damage to the bumper; 2. Use corner indicator posts to secure the bumper position. The primary function of a bumper is to absorb and mitigate external impacts, protecting the front and rear sections of the vehicle body.
19
4
Share

How Often Should a Honda Car Be Serviced?

Honda cars should be serviced every 5,000 kilometers. The maintenance for Honda cars includes: changing the engine oil, oil filter, air filter, transmission fluid, cylinder wires, spark plugs, and brake fluid. Taking the Honda Civic as an example, its body dimensions are: length 4517mm, width 1799mm, height 1434mm, with a wheelbase of 2700mm and a fuel tank capacity of 47 liters. The Honda Civic is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 177PS, maximum power of 130kW, maximum torque of 220Nm, paired with a continuously variable transmission.
3
3
Share

What grade of gasoline does the Sagitar use?

The Sagitar uses 95-octane gasoline. Taking the 2021 manual Fashion Smart Connection edition Sagitar as an example, its body dimensions are: length 4753mm, width 1800mm, height 1462mm, with a wheelbase of 2731mm, a fuel tank capacity of 50 liters, and a trunk capacity of 553 liters. The 2021 manual Fashion Smart Connection edition Sagitar features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum torque of 175Nm, paired with a 5-speed manual transmission.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.