What is the minimum ground clearance of the Geely Vision SUV?

2 Answers
StRafael
07/25/25 2:33am
The minimum ground clearance of the Geely Vision SUV is 175mm. The new Geely Vision SUV is available in 6 models. As a facelift, this new model features minor adjustments in detail styling, significant upgrades in smart connectivity configurations, and the addition of a new 1.4T+CVT powertrain. More details are as follows: 1. In terms of exterior design, the new Geely Vision SUV has undergone a comprehensive upgrade to the front grille, headlights, taillights, and front and rear bumpers, incorporating more fashionable and dynamic elements to give the new car a more minimalist and stylish appearance. 2. The interior has also seen significant changes, adopting a new black and brown dual-tone design, with optimizations and upgrades to dozens of areas including the center console, instrument panel, steering wheel, and door handles, making the overall interior look more elegant and refined.
Was this review help?
16
5
Share
FranciscoDella
08/10/25 4:37pm
As an ordinary driver who frequently drives SUVs in both urban and rural areas, I have quite a say about the ground clearance of the Vision SUV. Its minimum ground clearance is around 180mm, which is more than sufficient for city driving conditions, such as going over speed bumps or small potholes without any issues. I remember one time during the rain when I drove to the suburbs to visit relatives, I encountered a waterlogged section of the road, but the chassis wasn't scraped, which was quite reassuring. I recommend that owners pay more attention to chassis protection, especially those who often drive on rough roads, by checking tire wear or washing the car regularly to prevent rust. The 180mm height isn't the highest, but it's absolutely reliable for daily commuting, and with the assistance of a panoramic camera, visibility and control are excellent. In short, this SUV is suitable for practical drivers like me, being fuel-efficient and safe, with no sluggishness in driving.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

How to reset the pressure loss warning on Volkswagen?

Volkswagen pressure loss reset method: 1. Turn on the ignition; 2. Press the CAR button on the infotainment system; 3. Click the settings button to open the vehicle menu settings; 4. Select the tire option; 5. Click the SET button; 6. After adjusting the tire pressure to the standard range, click the confirm button to save the tire pressure. For older Volkswagen models, simply press and hold the SET button to reset. As one of the components operating in harsh conditions, tires constantly endure alternating impact forces and temperature changes. Therefore, the tire pressure monitoring system, like the ABS system, has gradually become a standard feature in vehicles.
13
2
Share

What is the method to reset the maintenance light on a Corolla?

Corolla maintenance light reset method is: 1. Press button A and step on the brake pedal, neither can be released midway; 2. Turn on the vehicle power without starting the engine; 3. The dashboard characters or the entire display will flash; 4. Continue holding button A, and ellipsis will appear on the dashboard; 5. Release the reset button A and the brake; 6. The maintenance light reset operation is complete, turn off the vehicle power. The Corolla is a brand under Toyota, a compact sedan with dimensions of 4630mm in length, 1775mm in width, 1480mm in height, a wheelbase of 2700mm, and a fuel tank capacity of 55 liters.
17
1
Share

What Causes the Airbag Warning Light to Illuminate?

When the airbag warning light illuminates, it indicates a malfunction. Possible causes: The illumination of the airbag warning light signifies a fault in the airbag system. Immediate inspection at a repair shop is necessary. Otherwise, during a traffic accident, the airbag may fail to deploy properly. Even without an accident, the airbag might unexpectedly deploy, posing significant safety risks. About automotive airbags: This passive safety protection system works in conjunction with seat belts to provide effective collision protection for occupants. During vehicle collisions, airbags can reduce head injuries by 25% and facial injuries by approximately 80%.
15
2
Share

What Causes a Sudden Increase in Engine Noise?

The reasons for a sudden increase in engine noise are: 1. Loose components: Some parts in the engine compartment, such as the valve cover or intake pipe, may become loose and collide with the compartment during driving, producing noise; 2. Oil issues: When new oil is replaced, the engine may not adapt to the oil's viscosity, potentially causing higher RPMs; 3. Carbon buildup: Over time, a significant amount of carbon deposits can accumulate, adhering to the friction components inside the engine and increasing friction. An engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc.
2
5
Share

How to Drive a Manual Transmission Car?

To drive a manual transmission car: 1. When starting, press the clutch pedal all the way down with your left foot and shift into first gear. Place your right foot lightly over the accelerator pedal. Slowly release the clutch while simultaneously releasing the handbrake and gently pressing the accelerator. As you press the accelerator, gradually lift your left foot off the clutch pedal to achieve a smooth start. 2. When starting on a steep hill, lift the clutch pedal with your left foot to the appropriate position, where the vehicle is in a semi-engaged state, then quickly press the accelerator while slowly releasing the clutch and handbrake to start the vehicle. When driving in rain or snow, it's important not only to reduce speed but also to make judgments in advance, especially when approaching intersections. Always slow down early to avoid being unable to stop in time. Remember to use intermittent braking to prevent the vehicle from skidding.
16
3
Share

How to Unlock a Stuck P Gear?

Methods to unlock a stuck P gear include: 1. Release the brake pedal and then press it down again, then attempt to shift gears; 2. If that doesn't work, try slightly turning the steering wheel before shifting gears; 3. Restart the engine, press the brake pedal again, and then shift gears; 4. Open the hood, disconnect the battery, restart the engine, press the brake pedal again, and then shift gears. These methods can generally resolve a stuck P gear. If the P gear remains stuck and cannot be shifted, it is likely due to a damaged gear limit switch, brake light switch, or brake light fuse. In such cases, it is necessary to contact a 4S dealership for repairs.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.