What is the minimum ground clearance of the Ford Mondeo?

1 Answers
JaceLynn
07/29/25 11:57pm
The minimum ground clearance of the Ford Mondeo is 115mm. Taking the 2020 Mondeo Fashion model as an example, it belongs to the mid-size car category with body dimensions of: length 4873mm, width 1852mm, height 1470mm, wheelbase 2850mm, fuel tank capacity 62.5l, and luggage compartment capacity ranging from 516 to 986l. The 2020 Mondeo Fashion model is equipped with a 1.5l turbocharged engine, delivering a maximum power of 134kw at 6000rpm, and a maximum torque of 243nm between 1750 to 4500rpm.
Was this review help?
19
1
Share
More Forum Discussions

What is the fuel tank capacity of the new Mondeo in liters?

The 2021 Nissan Teana comes in 6 models, all with a fuel tank capacity of 61.3 liters. The vehicles are equipped with either a 2.0L turbocharged or naturally aspirated engine, and all models feature an 8-speed continuously variable transmission (CVT). All variants are front-wheel drive. In the same class, the 2022 Honda Accord 260TURBO Comfort Edition has a fuel tank capacity of 56 liters, while the 2021 Teana 2.0L XE Fashion Edition holds 55 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the manufacturer's specified tank capacity is measured from the tank bottom to the safe fill level, with additional space remaining from the safe level to the tank opening. This space accommodates fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual fuel quantity may exceed the nominal tank capacity. To check remaining fuel, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (empty) and F (full). When the needle approaches E, it indicates low fuel, while nearing F signifies sufficient fuel levels.
16
2
Share

Why does the air conditioning pressure switch of the new Santana keep burning out?

Car air conditioning pressure switches are essential control components that ensure the proper operation of the car's air conditioning refrigeration system. Pressure control can be categorized into high, medium, and low levels, and further divided into 2, 3, or 4-wire configurations. High and low-pressure switches control the start and stop of the compressor when abnormal pressure occurs in the system. The control range of the high-pressure switch is generally between 15-26 bar, while the low-pressure switch operates within 0-4 bar. The medium-pressure switch, typically set at 17 bar, controls the high and low speeds of the condenser fan. Below is additional information on air conditioning pressure: 1. Pressure temperature sensor: This refers to a sensor that can detect temperature and convert it into an available output signal. Temperature sensors are the core components of temperature measurement instruments and come in a wide variety. Based on measurement methods, they can be divided into contact and non-contact types, and according to sensor materials and electronic component characteristics, they are classified into thermal resistors and thermocouples. 2. Loss of protection: If the high-pressure switch loses its protective function, the system may experience issues such as pipe bursts, belt slippage, and engine stalling. If the low-pressure switch fails, in cases of system leakage, foreign objects or water may enter the system, causing irreversible damage to the refrigeration system.
2
3
Share

Where is the chassis number of Pagani?

Pagani's chassis number is generally located at the lower left corner of the front windshield, or on the driver's side door hinge pillar, door lock pillar, door edge, and may also be found in the engine compartment. The specific location varies depending on the model. The chassis number is also known as the VIN (Vehicle Identification Number) code. VIN is the abbreviation for Vehicle Identification Number. Below is an introduction to the automotive VIN code: 1. Composition of the VIN code: The VIN code consists of 17 characters (including English letters and numbers), commonly referred to as the seventeen-digit code. It is a unique set of characters assigned by the manufacturer to identify a vehicle. The generation of this number follows specific rules, corresponding uniquely to each vehicle and ensuring no duplication worldwide within fifty years. Therefore, it is often referred to as the car's ID. 2. Regulations related to the VIN code: Governments and automotive companies have specific regulations for the 17-digit identification code of vehicles produced in their country or by their company. Technical regulations in various countries generally stipulate only the basic requirements for the vehicle identification code, such as it should consist of 17 digits, with specific dimensions, writing forms, arrangement positions, and installation positions for letters and numbers. Except for mandatory regulations on the meaning of certain symbols, others are not strictly regulated and are left to the manufacturer's discretion. The vehicle identification code often contains information about the vehicle's manufacturer, production year, model, body type, engine, and other equipment.
5
1
Share

What are the dimensions of the Front Lander in terms of length, width, and height?

Toyota Front Lander measures 4740/1855/1660 mm in length, width, and height respectively, with a wheelbase of 2690 mm. Appearance of the Front Lander: Unlike the Corolla Cross, the Front Lander adopts the exterior styling kit of the Japanese version Corolla Cross. The front bumper, along with the large grille, features a narrow strip around the emblem. The base model does not come with full LED headlights, while the high-end model's headlight housing includes an LED strip dividing the upper and lower sections. Additionally, the vehicle offers optional black roof and silver trim for added personality. Built on the TNGA-C platform, the Front Lander is positioned as an entry-level compact SUV with body dimensions of 4485/1825/1620 mm and a wheelbase of 2640 mm, showcasing rich side profile lines. Powertrain of the Front Lander: Under the hood, the Front Lander is equipped with the class-leading TNGA 2.0L Dynamic Force Engine paired with a Direct Shift-CVT transmission, forming a golden powertrain combination. It delivers a maximum power of 126 kW with a combined fuel consumption of just 5.8L/100km, balancing strong performance with low fuel consumption.
17
1
Share

What is the difference between advanced fully synthetic oil and fully synthetic oil?

Advanced fully synthetic oil and fully synthetic oil mainly differ in performance, with the specific differences as follows: 1. Oxidation resistance: Advanced fully synthetic oil has approximately 25% better oxidation resistance than regular fully synthetic oil, more effectively preventing oil oxidation and degradation, thereby extending the oil change interval. 2. Dispersancy: Advanced fully synthetic oil features top-tier detergency and dispersancy, significantly reducing deposit formation, preventing engine wear, maintaining strong engine performance, and lowering fuel consumption. 3. Higher viscosity index: Advanced fully synthetic oil has the widest viscosity range and a higher viscosity index, providing excellent anti-wear protection for engines even under extremely harsh conditions (such as racing), reducing engine wear, and extending engine lifespan.
4
1
Share

Why does it show low tire pressure when there is still air?

There might be a slow leak in the tire. You can reset the tire pressure monitoring system and observe further. Below are the specific functions of tire pressure monitoring: 1. Prevent accidents: The tire pressure monitoring system is an active safety device that can alert the driver in time when there are dangerous signs in the tires, prompting them to take appropriate measures to avoid serious accidents. 2. Extend tire lifespan: It ensures that the tires always operate within the specified pressure and temperature range, thereby reducing tire damage and extending their service life. 3. Improve driving economy: When the tire pressure is too low, it increases the contact area between the tire and the ground, thereby increasing friction resistance. When the tire pressure is 30% below the standard value, fuel consumption will increase by 10%.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.