···
Log in / Register

What is the minimum ground clearance of the Enclave S?

6Answers
DeAlexandra
08/30/2025, 03:57:21 AM

The minimum ground clearance of the Enclave S is 190mm. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The Enclave S is a mid-size SUV under SAIC-GM Buick. Taking the Enclave S 2020 652T two-wheel-drive Elite model as an example, the body adopts a 5-door, 5-seat structure with a fuel tank capacity of 60 liters. In terms of power, the Enclave S 2020 652T two-wheel-drive Elite model is equipped with a 2.0L inline four-cylinder turbocharged engine, with an aluminum alloy structure, delivering a maximum power of 174kW and a maximum torque of 350Nm, paired with a 9-speed automatic transmission.

Was this review help?
109
Share
WestonLynn
09/12/2025, 12:52:43 AM

I'm an experienced driver who enjoys driving the Enclave S, and I feel its minimum ground clearance is approximately 196mm. This height is quite suitable for city driving—when encountering speed bumps or small potholes, the chassis is less likely to scrape, enhancing driving comfort. Previously, I drove a sedan with only about 150mm clearance, and the difference is noticeably more stable, especially on waterlogged roads after rain. The 196mm clearance allows easy passage, preventing water from damaging the engine. I recommend owners regularly check tire pressure, as maintaining the standard value ensures the ground clearance performs optimally. For complex road conditions, like rural dirt roads, this height is also practical, avoiding the fear of scraping the undercarriage common with low-clearance vehicles. Overall, the 196mm clearance is a well-balanced design, prioritizing both safety and convenience. A test drive before purchase is advisable to experience it firsthand.

Was this review help?
13
Share
Expand All
BenjaminLee
10/26/2025, 01:41:16 AM

As someone who frequently ventures off-road, I'm impressed by the Envision S's ground clearance, officially rated at 196mm. This figure ranks mid-to-upper among SUVs - for comparison, the Honda CR-V has about 180mm, while the Toyota RAV4 is around 195mm. This gives it an advantage on rough terrain. I've taken it mountain climbing, where the 196mm clearance kept the chassis sufficiently high to avoid scraping minor obstacles. The well-tuned suspension further enhances its off-road capability. Ground clearance also affects wading depth; typically, 196mm can handle 150mm water depth, making it suitable for rainy regions. Remember to regularly inspect suspension components, as wear can impact clearance performance. Overall, as a family vehicle with mild off-road capability, this height strikes a good balance.

Was this review help?
9
Share
Expand All
Ivy
12/09/2025, 01:01:20 AM

As a new driver, I was very concerned about this issue. The Buick Envision S has a minimum ground clearance of 196mm. Simply put, this is the distance from the bottom of the wheels to the lowest point of the vehicle body. A larger value means a higher chassis, which helps with driving safety. 196mm is approximately 20cm, which can prevent scraping the undercarriage on speed bumps or uneven roads, protecting important components. Compared to the minimal height of sedans, this improvement in SUVs is very practical—for example, you don't have to worry about stalling when driving through puddles on rainy days. I paid attention to this when buying the car, and it's sufficient for daily city driving. During maintenance checks, don't overlook tire wear, as it indirectly affects the clearance.

Was this review help?
18
Share
Expand All
LucilleMarie
01/29/2026, 02:09:59 AM

From an automotive enthusiast's perspective, the Envision S's ground clearance design of 196mm is quite sensible. This height ensures good off-road capability without compromising high-speed stability, such as maintaining decent roll control during cornering. My research shows it's very close to competitors like the Volkswagen Tiguan L's 198mm, but with tuning more biased toward comfort. Ground clearance also affects air resistance and fuel consumption - 196mm strikes a good balance. If you modify the body or install roof racks, clearance may slightly decrease, so the factory setting is recommended for optimal safety. This parameter is crucial for chassis design, ensuring practicality across diverse road conditions.

Was this review help?
8
Share
Expand All
MacDelilah
04/24/2026, 01:38:29 PM

As a family car owner, the 196mm ground clearance of the Envision S is quite considerate. On weekends when taking the kids to the park, encountering gravel roads or slopes, the chassis height minimizes cabin vibrations, ensuring a more comfortable ride for rear passengers. For daily grocery runs or hauling luggage, the 196mm clearance prevents undercarriage scraping, especially when entering or exiting underground parking—it's worry-free. I find this measurement more practical than many compact SUVs; for example, the Chevrolet Equinox has about 180mm, making the Envision S's advantage clear. Regular maintenance of the suspension and shock absorbers is crucial to maintaining stable clearance.

Was this review help?
14
Share
Expand All
More Q&A

What is the Difference Between Direct Injection and Electronic Fuel Injection in Cars?

The differences between direct injection and electronic fuel injection in cars are as follows: 1. Fuel injection method: Electronic fuel injection sprays fuel into the engine's intake manifold, while direct injection sprays fuel directly into the engine's cylinder. 2. Different installation positions of the fuel injector: In multi-point electronic fuel injection, the injector is installed at the end of the intake manifold, and the fuel spray is directed into the intake ports of each cylinder; the air-fuel mixture is formed outside the cylinder. In direct injection, the injector is installed on the cylinder head, spraying fuel directly into the cylinder; the air-fuel mixture is formed inside the cylinder. 3. Different fuel injection pressures: Multi-point electronic fuel injection operates at pressures between 2.5bar and 4bar, while direct injection operates at pressures between 40bar and 400bar. 4. Different fuel supply system compositions: Multi-point electronic fuel injection does not have a high-pressure fuel pump, whereas direct injection includes one. 5. Different fuel injection start angles and durations: Due to lower injection pressures, multi-point electronic fuel injection requires a longer injection time under heavy loads, and the next injection cycle may need to start after the intake valve closes. However, direct injection occurs after the intake valve opens and can take place during both the intake and compression strokes. Direct injection lowers the cylinder temperature at the moment of compression, aiding in the cooling of the piston and cylinder liner, thereby reducing the engine's tendency to knock. As a result, direct injection engines can achieve a higher compression ratio, leading to improved thermal efficiency.
115
Share

What is the fuel consumption of the CR-V 2.4L 4WD Luxury Edition?

CR-V 2.4L 4WD Luxury Edition has a fuel consumption of 11.2L/100KM. Below are the detailed specifications of the Honda CR-V: 1. Drivetrain: The Honda CR-V comes in two versions: a two-wheel-drive model and a four-wheel-drive model. The four-wheel-drive version features a front-engine, four-wheel-drive system with an on-demand all-wheel-drive configuration. 2. Powertrain: The Honda CR-V is equipped with two i-VTEC engines: a 2.0L and a 2.4L. The 2.0L engine delivers a maximum power of 114kW and a peak torque of 190N·m, while the 2.4L engine produces a maximum power of 140kW and a peak torque of 222N·m. 3. VTEC Technology: The Honda CR-V features VTEC engine technology, which stands for Variable Valve Timing and Lift Electronic Control System. Unlike conventional engines, VTEC engines differ in the number and control method of camshafts and rocker arms, featuring two distinct sets of valve drive cams for low-to-medium and high-speed operations, with automatic switching via electronic control. The VTEC system allows the engine to automatically adjust valve opening timing and lift based on driving conditions, thereby altering intake and exhaust volumes. This results in increased power output, reduced fuel consumption, and lower emissions.
108
Share

Will I Get Penalized for Driving with the Trunk Open While Carrying Items?

Driving with the trunk unclosed and in an open state is considered a traffic violation. Typically, traffic cameras do not capture this type of violation. However, if spotted by traffic police, the vehicle may be stopped, and a ticket will be issued for violating road traffic safety laws and regulations regarding road usage. Below are some precautions regarding the trunk: 1. Avoid storing flammable and explosive items: As the trunk is an enclosed space, temperatures can rise rapidly. Storing lighters, hairspray, or other flammable and explosive items in the trunk, especially during summer heat and long-distance travel, can lead to explosions with unimaginable consequences. 2. Avoid storing valuables: Keeping valuables, premium cigarettes, or fine liquor in the trunk is highly unsafe. Thieves are cunning, and it is absolutely inadvisable to leave valuables in the car trunk.
110
Share

Is Half Engagement Stepping on the Clutch Halfway?

Half engagement is stepping on the clutch halfway. Here is an introduction to half engagement: 1. Introduction: Clutch half engagement refers to the unstable connection state of the clutch, where the driver presses the clutch pedal, gradually reducing the pressure of the clutch pressure plate, causing the driving plate and the driven plate to be in a state of both rotating and slipping. During the field driving test, drivers who are not yet proficient in operation and cannot complete the required actions within the specified time often use half engagement to reduce the vehicle speed, thereby extending the operation time. However, the rules for off-field driving tests do not allow the use of half engagement. 2. Half Engagement: Half engagement is when the clutch is between disengaged and engaged, and the transmission system is between connected and disconnected, providing a flexible power source. It is frequently used in complex road conditions, as well as during starting, turning, and short-distance following. When the clutch is in the half engagement state, the friction between the pressure plate and the friction disc is minimal.
103
Share

How to Turn on the Cold Air in the 7th Generation Accord?

The cold air in the 7th generation Accord can be turned on by pressing the A/C button. AUTO means to turn on, press it once, and the fan will start working. Here are more related introductions: 1. Air Conditioning Cooling Principle: After the air conditioner is powered on, the low-pressure steam of the refrigerant in the refrigeration system is sucked in by the compressor and compressed into high-pressure steam, which is then discharged to the condenser. At the same time, the outdoor air sucked in by the axial fan flows through the condenser, taking away the heat released by the refrigerant, causing the high-pressure refrigerant steam to condense into high-pressure liquid. It exchanges heat with the outdoor air to become medium-temperature and medium-pressure refrigerant liquid, which then enters the evaporator after being throttled and depressurized by the capillary tube, evaporating under the corresponding low pressure and absorbing the surrounding heat. 2. Air Conditioning Buttons: The left and right sides respectively adjust the cold and hot air for the driver and passenger. Blue represents cold air, and red represents hot air. Adjust both sides to the lowest blue area, which means pressing the blue button to the lowest state, and then press the A/C air conditioning switch button once.
109
Share

What Should You Ask the Dealer for When Buying a New Car?

When purchasing a new car, you should request complimentary items from the dealer such as window tinting, floor mats, small gifts like cakes and perfumes, full-coverage floor mats, and reflective vests for the vehicle. Below is an introduction to related automotive content: 1. Determining Factors: The quality of a vehicle's handling is primarily determined by three factors: power, suspension, and steering system. 2. Detailed Introduction: Power is the foundation of handling. Only with strong and smooth power output can a vehicle qualify to discuss handling; Suspension is the key to handling. Generally speaking, for two cars with similar power, the difference in handling depends on the suspension. A solid and resilient suspension ensures stable and reliable handling.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.