What is the minimum ground clearance of the Emgrand SUV chassis?

1 Answers
DelSabrina
07/30/25 8:14am
The minimum ground clearance of the Emgrand SUV chassis reaches 200mm under full load. Here is an introduction about the minimum ground clearance: 1. The larger the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, which reduces stability; the smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower the center of gravity, which can increase stability. 2. The minimum ground clearance must consider the passability of loading and unloading platforms during transportation and the possibility that the car will not scrape when approaching the edge of a general sidewalk. If sales are restricted to a certain country or region, the local road quality must also be considered. 3. At the same time, the value of the minimum ground clearance has certain limitations, as it is related to the vehicle's function and aerodynamics. For example, the minimum ground clearance of a sports car will be relatively small, while that of an SUV will be relatively large.
Was this review help?
11
5
Share
More Forum Discussions

What Causes the Engine Oil Warning Light to Illuminate?

Here are the reasons why the engine oil warning light may illuminate: 1. Reason one: The engine lubrication system is internally contaminated with sludge, causing oil passage blockage and oil strainer clogging, thereby preventing the system from establishing normal pressure. 2. Reason two: Excessive wear of crankshaft bearings, connecting rod bearings, or camshaft bearings leads to the lubrication system failing to maintain oil pressure, triggering the oil warning light. 3. Reason three: Internal blockage or excessive wear of the oil pump prevents the system from building sufficient oil pressure. 4. Important note: If the oil warning light comes on, it is crucial to seek immediate repairs. Continuing to drive before identifying the cause may result in severe engine damage such as cylinder scuffing or crankshaft seizure, necessitating major overhauls. Even if repairable, this undoubtedly causes significant harm to the engine.
1
3
Share

How to Repair Dull Car Paint?

There are two methods to repair dull car paint: 1. Car waxing: Car waxing is a very common automotive paint beauty treatment that can significantly improve the brightness of the car's surface. It involves applying a layer of wax on the paint surface, which serves to waterproof, protect against acid rain, and prevent paint oxidation; 2. Car crystal coating: Car paint crystal coating is another method that can greatly enhance the brightness of the paint surface. This automotive beauty treatment provides a reliable paint sealing technology with polymer materials, forming a dense silicon dioxide inorganic protective layer on the car paint surface. This silicon dioxide inorganic protective layer not only improves the brightness of the car paint surface but also has functions such as hydrophobicity, UV protection, high hardness, anti-static, and anti-fouling. It also protects the car paint during minor frictions.
20
3
Share

Will the car chassis get wet when driving in the rain?

Driving in the rain can easily wet the car chassis. Here is relevant information: 1. Prone to rust: Rainwater causes more severe damage to the chassis. Since the chassis is close to the ground on rainy days, it is particularly susceptible to rust. Therefore, it is essential to pay attention to the cleaning and rust prevention of the car chassis. Additionally, avoid using alkaline cleaning solutions to wash the body and chassis. If the original vehicle has not undergone chassis sealing, it is best to apply a chassis sealant. 2. When water is deep: During heavy rain or when crossing deep water, the exhaust pipe is prone to water ingress, which can lead to serious consequences such as engine water damage. Therefore, in such situations, it is crucial to first consider the depth of the water and whether it is truly passable. Ensure you are familiar with the terrain, clearly understand the water depth, and that it does not exceed 30~50cm.
8
3
Share

What Causes Rear Wheel Brake Noise?

Rear wheel brake noise can be attributed to the following reasons: 1. Reason one: When the car's brake pads are severely worn, metal friction noise usually occurs, and the sound can be quite harsh. If this is accompanied by reduced braking effectiveness, then the noise is likely related to this issue. 2. Reason two: The noise could also be caused by incorrect installation of the brake system. If this is the case, it is necessary to seek professional inspection and repair promptly. More details about the brake system are as follows: 1. Detail one: The brake system is crucial for overall driving safety. Once the brake system malfunctions, the consequences can be unpredictable. Within the entire brake system, brake pads play a pivotal role, so timely replacement of brake pads is essential for the safety of the driver. 2. Detail two: Generally, when a car's total mileage reaches 30,000-40,000 kilometers, the brake pads need to be replaced. When the mileage reaches 70,000 kilometers, the car's brake discs should be replaced.
12
5
Share

How to Turn on the Air Conditioning in the 14th Generation Sylphy?

14th Generation Sylphy can press the AUTO button to turn on the automatic air conditioning and activate the cooling. Below are the reasons why the air conditioning may not be cold enough: 1. Refrigerant Leakage: If the air conditioning is not cold enough, check for refrigerant leakage. Observe whether there are oil traces or black dirt under the oil passage. If present, it indicates refrigerant leakage in the air conditioning pipeline. If the vehicle frequently requires refrigerant refills to maintain the cooling effect, it is necessary to have it checked at a 4S shop. 2. Condenser Heat Dissipation Issues: The condenser is a crucial component for the heat dissipation of the car's air conditioning, located at the very front of the engine compartment. Prolonged use can lead to oil, dirt, or other debris covering the condenser, reducing its heat dissipation performance and affecting the air conditioning's cooling. Therefore, it is essential to clean the condenser regularly.
9
5
Share

How to Deal with Mold in a Car?

There are two methods to handle mold in a car: 1. Place sachets: Sachets can improve the air quality inside the car. If you find sachets ineffective or dislike their scent, you can place a bottle of perfume in the car and spray some to alleviate odors. When choosing perfume, avoid acidic ones, as they may be effective in removing odors but can have other drawbacks; 2. Turn on the heater in the air conditioning: Set the air conditioning to warm air and open all the car doors. This method is also quite effective, but it depends on the weather conditions. Avoid placing the car in a cold, damp area and instead choose a sunny day. However, direct exposure to intense sunlight is not recommended.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.