What is the minimum ground clearance of the Emgrand?

1 Answers
OAshley
07/29/25 4:53pm
The minimum ground clearance of the Emgrand is 138mm. The minimum ground clearance of the Emgrand refers to the distance between the lowest point (excluding the wheels) and the supporting surface, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance for the Emgrand means better off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. The Emgrand is equipped with a new third-generation 1.5TGDI engine from the Jule Power series and a 7WDCT transmission, offering four driving modes: Sport, Comfort, Eco, and Sport+ Extreme. The dimensions of the Emgrand are 4700mm in length, 1850mm in width, and 1432mm in height, with a wheelbase of 2736mm. Generally, the ground clearance for sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the Emgrand's ground clearance is not static; it also depends on the load condition. Therefore, changes in the Emgrand's load should be considered when evaluating ground clearance variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For well-paved urban roads, a vehicle with lower ground clearance can enhance stability and comfort. For frequent travel to remote areas or driving on rough terrain, a vehicle with higher ground clearance is advisable to avoid chassis scraping or damage, considering its off-road performance.
Was this review help?
11
2
Share
More Forum Discussions

What is the suitable temperature for car air conditioning in winter?

In winter, the suitable temperature for car air conditioning is between 18°C and 25°C. It is advisable to maintain a temperature difference of no more than 10°C between the inside and outside of the car. The correct method is to wait for the engine to warm up, then turn on the heating mode, set the air circulation to external circulation to expel the cold air inside the car, and then switch to internal circulation. The car air conditioning system, abbreviated as car AC, is used to regulate and control the temperature, humidity, air cleanliness, and airflow inside the vehicle to an optimal state. Its components include the refrigeration system, heating system, air purification device, and control system. Maintenance methods for the air conditioning system include: 1. Replace the air filter in a timely manner; 2. Regularly clean the external circulation ducts.
9
5
Share

How far can the Bestune T77 go when the fuel tank warning light turns red?

The Bestune T77 can travel approximately 40 kilometers after the fuel tank warning light turns red, but it is advisable to refuel the car promptly. Below is more information about the Bestune T77: 1. The Bestune T77 is the first model in the new 'T' series of Bestune's product lineup. It breaks away from Bestune's previous design style, adopting a new design philosophy that makes the overall vehicle appearance more youthful, while retaining many elements from the concept car in its exterior. 2. The vehicle has a displacement of 1.2T, with two transmission options available: dual-clutch and manual. The car's maximum horsepower is 143PS, and the maximum torque is 204.0N·m, balancing high power and fuel efficiency for free driving in all road conditions.
2
1
Share

What is the Function of Wheel Alignment?

The introduction to the function of wheel alignment: 1. It can keep the car driving straight stably without deviation, ensuring driving safety; 2. It maintains the optimal angle between the tires and the car body, preventing uneven tire wear; 3. It reduces the wear between the tires and steering components during driving, extending the service life of the tires. The following are the situations that require wheel alignment: 1. When driving, if the car is moving straight but the steering wheel is tilted, or if you feel heavy, shaky, or unresponsive steering, wheel alignment is needed; 2. If the tires show abnormal wear, such as wave-like wear, block-like wear, or uneven wear on one side, wheel alignment is required. 3. If you feel the car floating, bumping, or swaying while driving, wheel alignment is necessary. 4. If the suspension or steering system has been repaired or replaced, wheel alignment should also be performed.
15
1
Share

Can Flood-Damaged Vehicles Be Transferred?

All can be transferred, whether flood-damaged, accident-involved, or fire-damaged vehicles. Below are the specific details: Principle: Every vehicle has a fixed registration, much like a person. The vehicle registration primarily records the owner's information, address, and relevant vehicle parameters. Transferring a vehicle proves that it belongs to the current owner and has no accident or violation records. However, if the vehicle has issues such as being involved in an accident, failing annual inspections, being stolen, or being smuggled, it cannot be transferred through normal procedures. Required Documents: Vehicle license; Vehicle registration certificate; Vehicle registration supplementary form (obtained from the local DMV with ID, vehicle license, and road maintenance fee certificate); Vehicle purchase tax certificate; ID cards and household registration books of both buyer and seller. For non-local residents, a temporary residence permit is required, and the buyer's permit must be valid for at least one year.
10
5
Share

When did China III start production?

The China III standard for automobiles was implemented on July 1, 2008. According to national regulations, starting from July 1, 2008, the 'China III' emission testing standard for motor vehicle exhaust emissions became mandatory nationwide. This undoubtedly posed a significant impact on many automobile manufacturers, especially presenting both opportunities and challenges for bus manufacturers, one of the main players in the commercial vehicle sector. The upgrade in emission standards is beneficial for environmental protection. Below is an introduction to the China III standard: 1. The China III emission standard mainly refers to: HC emission levels below 0.2g/km, CO emission levels below 2.3g/km, NOx emission levels below 0.15g/km, with no PM requirement. 2. The China III emission standard is equivalent to the European III emission standard, meaning the pollutant content in the exhaust is similar to that of Euro III. The difference is that new vehicles must be equipped with an OBD, or On-Board Diagnostics system.
3
3
Share

What are the body dimensions of the Hyundai Genesis GV70?

Hyundai's new Genesis model will adopt a family-style front fascia design, featuring a large-sized shield-shaped front grille and split-type headlights. Below are the relevant details: 1. Body Dimensions: The new vehicle has a body length of 4684 mm and a wheelbase of 2835 mm. It will also offer 10 body colors for consumers to choose from. 2. Powertrain: The Genesis will be equipped with a new 2.5-liter turbocharged engine, replacing the current 2.0-liter engine. The new 2.5-liter engine delivers a maximum power of 294 horsepower and a peak torque of 420 N·m. In terms of the transmission system, it will be paired with an 8-speed wet dual-clutch transmission.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.