What is the minimum ground clearance of the Civic when fully loaded?

1 Answers
LeilaniFitz
07/29/25 5:34pm
The minimum ground clearance of the Civic when fully loaded is 105mm, while the minimum ground clearance in an unloaded state is 141mm. In terms of exterior design, the Civic features chrome accents around the front grille and fog lights, a mesh design in the central part of the front bumper, and taillights similar to those of the Accord, with a rectangular light unit added to the trunk lid. For safety, the Civic is equipped with front and side airbags, side curtain airbags, and a rear anti-collision beam. In terms of dimensions, the Civic measures 4517mm in length, 1799mm in width, and 1434mm in height, with a wheelbase of 2700mm, a front track of 1547mm, and a rear track of 1563mm.
Was this review help?
13
5
Share
More Forum Discussions

What is the fuel tank capacity of the Verano?

The 2022 Verano has a fuel tank capacity of 44L, equipped with a 1.5T turbocharged engine delivering a maximum power of 135kW, maximum horsepower of 184P, and a maximum power speed of 5500rpm. In the same vehicle class, the 2021 Bluebird has a fuel tank capacity of 50 liters, while the 2022 Octavia has a fuel tank capacity of 51 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space is reserved to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the dashboard, marked with E and F. When the needle is close to E, it indicates low fuel, while approaching F means the fuel level is sufficient.
15
0
Share

What does NIO BaaS mean?

NIO BaaS stands for Battery as a Service, also known as NIO Battery Rental Service. The underlying logic of "Battery as a Service" is chargeable, swappable, and upgradable. NIO is a global smart electric vehicle brand, established in November 2014. Its main products include the NIO EC6, NIO ES8, NIO ES6, NIO EP9, and NIO EVE. Chargeable: This means using a private dedicated charging pile at home and commercial charging piles outside. You can choose NIO's own supercharging stations or any of the mainstream charging service providers in China, such as Star Charge, TELD, Wanma, Xiaoju, XPeng, and Yunkuaichong. Swappable: NIO's battery swap service supports magazine-style battery swapping, which can be completed in just 3 minutes. Based on the battery swap model, NIO offers battery rental services. Upgradable: This means NIO owners can continuously increase their vehicle's range by paying for upgrades. For example, upgrading from a 70kWh battery pack to an 84kWh battery pack, and then further upgrading to a 100kWh battery pack.
1
3
Share

Does Replacing the Clutch Three-Piece Set and Removing the Transmission Damage the Car?

Under the premise of ensuring quality and paying attention to disassembly and assembly, replacing the clutch three-piece set will not affect the car. Under normal usage conditions, the lifespan of one component is similar to the other two related parts, so they need to be replaced together. If not replaced together, issues such as mismatched parts and uneven wear may occur. Pressure Plate: The pressure plate is a metal disc that normally tightly integrates with the clutch plate, forming a single unit that rotates with the engine and transmits power to the transmission. Clutch Plate: The clutch plate is a wear-prone component in the vehicle's drivetrain (including cars, motorcycles, and other mechanical transmission equipment). Special attention should be paid to avoid keeping the foot on the clutch pedal while the engine is running. Release Bearing: The clutch release bearing is installed between the clutch and the transmission. The release bearing housing is loosely fitted on the tubular extension of the transmission's first shaft bearing cover. A return spring ensures the bearing's shoulder always presses against the release fork and retracts to the rearmost position, maintaining a gap of about 3 to 4mm with the release lever end (release fingers).
10
5
Share

Can a New Car Drive at 120 Miles Per Hour?

No, a new car is in the break-in period, and during this time, it is crucial to control the driving speed and avoid excessively high speeds. The speed should preferably be kept between 50 to 80 kilometers per hour. This is because the surfaces of various components in a new car are still relatively rough, and there may be certain deviations and hidden defects from the manufacturing and assembly processes. Driving at high speeds can exacerbate wear between parts or lead to safety incidents. Proper Warm-Up: During a cold start, it is best to wait until the engine coolant temperature reaches above 40 degrees before setting off. When starting, depress the clutch and accelerator gently, and avoid revving the engine in neutral. Frequent Gear Shifting: Start in a low gear and gradually shift to higher gears, driving progressively. Avoid driving in a single gear for extended periods during the break-in period. Additionally, be sure to avoid the phenomena of low-gear high-speed or high-gear low-speed driving.
7
4
Share

How to Adjust the Rearview Mirrors for the Subject 2 Driving Test?

Methods for adjusting the rearview mirrors in different positions for the Subject 2 driving test: 1. Adjusting the central rearview mirror: Adjust the left and right positions so that the left edge of the mirror just cuts off the right ear of your reflection in the mirror. This means that under normal driving conditions, you cannot see yourself in the central rearview mirror. For the up and down positions, place the distant horizon in the center of the mirror. The distant horizontal line should be positioned along the centerline of the central rearview mirror, then adjust left and right so that the image of your right ear is just at the left edge of the mirror. 2. Adjusting the left side mirror: For the up and down position, the ground should occupy the center of the mirror. For the left and right position, try to make the car body occupy 1/4 of the mirror while ensuring that the lowest point of the rear wheel touching the ground is visible. 3. Adjusting the right side mirror: Due to the limited visibility for the driver, extra attention is needed when adjusting the right side mirror. First, use the ground horizon as a reference, adjusting it the same way as the left side. However, after adjustment, be sure to test it by getting into the car and observing whether it meets the visibility requirements.
15
3
Share

Will a modified vehicle be penalized with a 500-yuan fine and points deduction?

6 points will be deducted. Additional extended information is as follows:1. According to the "Regulations of the People's Republic of China on Road Transport": Transportation authorities and road transport management agencies at all levels must strictly manage the modification of road transport vehicles in accordance with the "Regulations of the People's Republic of China on Road Transport" and related supporting regulations, and severely crack down on unauthorized vehicle modifications. Illegal modifications of road transport vehicles will damage the vehicle's structure and performance, pose safety hazards during driving, create unfair competition in the road transport market, hinder the healthy and coordinated development of the road transport market, and cause significant harm.2. Other: Unauthorized replacement of engines, transmissions, front axles, rear axles, or frames that differ from the original model; unauthorized replacement of vehicle bodies or tanker tanks; unauthorized changes to the vehicle's suspension type (changes between air suspension, composite suspension, leaf spring suspension, etc.). For micro road passenger vehicles, the installation of front and rear anti-collision devices, and for road freight vehicles, the installation of windshields, water tanks, toolboxes, spare tire racks, etc., as well as interior decorations for road transport vehicles, can be decided by the road transport operators themselves under safe conditions and without affecting the identification of license plates. Transportation authorities and road transport management agencies must not classify these as illegal modifications of road transport vehicles.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.