What is the minimum ground clearance of the Citroen C5 X?

1 Answers
OJoshua
07/29/25 4:39pm
The minimum ground clearance of this vehicle is 193mm. Below are the relevant details: Exterior: The front fascia features a relatively flat design, with the iconic grille extending to both sides and connecting with the split-type headlights, forming an 'X'-like design. The upper LED daytime running lights have a very sharp appearance, while the lower matrix-style light clusters also offer high recognizability. Dimensions: The vehicle measures 4805mm in length, 1865mm in width, and 1505mm in height, with a wheelbase of 2785mm, placing it within the mainstream dimensions for a B-segment sedan. Powertrain: It is equipped with a 1.6T turbocharged all-aluminum engine, delivering a maximum power output of 175 horsepower and a peak torque of 250Nm, paired with an 8-speed automatic transmission.
Was this review help?
9
3
Share
More Forum Discussions

What to Do When a Car Gets a Dent?

Repair methods for a dent in a car: 1. Traditional metalworking is required to restore it to its original condition. Metalworking repair involves fixing the deformed part of the car's metal shell; 2. Then, by spraying special paint, the deformed metal surface of the car is restored to match the undamaged areas. A palm-sized dent will crack over time if only filled with putty. The repair steps are: 1. First, perform metalworking to pull out the dent; 2. Then apply metal filler, sand it, and after leveling, apply fine filler; 3. Then wet sanding; 4. Cover with masking paper and proceed to spray painting; 5. Polishing. Generally, this needs to be done at a repair shop or 4S shop for metalworking and painting.
14
3
Share

How to Replace a Broken Front Wheel Bolt on the Tiggo 3?

The method for replacing a broken front wheel bolt on the Tiggo 3: You need to use a jack to remove the wheel hub nuts in a diagonal sequence, then take off the wheel hub and tire. Next, remove the broken bolt from the bearing area, unscrew the remaining part, and replace it with a new one according to the model specifications. The Tiggo 3 is a model under Chery Automobile Co., Ltd., with body dimensions of 4420mm in length, 1760mm in width, and 1670mm in height, and a wheelbase of 2510mm. In terms of interior, the Tiggo 3 features a three-spoke steering wheel with moderate size and good grip, complemented by lead-gray decorative strips, giving an overall good impression, which also reflects the high precision of the manufacturing mold.
9
5
Share

What Causes the Lack of Power and Muffled Acceleration in the Ninth-Generation Accord?

Here are the specific reasons for the lack of power and muffled acceleration in the ninth-generation Accord: 1. Carbon deposits: Carbon buildup, including cylinder carbon deposits, throttle carbon deposits, spark plug carbon deposits, and intake carbon deposits, can all lead to sluggish acceleration and a muffled sound. 2. Fuel system: Using an incompatible fuel grade can reduce the vehicle's output power, resulting in weak engine acceleration. 3. Air intake: If the air filter is clogged due to prolonged use without timely cleaning, insufficient air volume will cause an overly rich air-fuel mixture, leading to decreased engine power. For vehicles equipped with a turbocharger, if the turbocharging system fails, the engine will remain sluggish and unable to deliver full power even when the throttle is applied. 4. Engine overheating: Overheating can impair lubrication, increase mechanical wear, reduce engine power, and result in weak acceleration.
11
2
Share

What causes the jerking and surging at low speeds in an Accord?

Here are the specific reasons for jerking at low speeds in an Accord: 1. Clogged engine oil passages: The combustion of fuel, which is the power source of the engine, is determined by the combined action of ignition, intake, and fuel injectors. If the intake volume decreases, ignition weakens, or fuel injection reduces, the power output will be insufficient, leading to a jerking sensation. 2. Dirty transmission fluid: This can cause damage to the solenoid valves. If sludge in the transmission fluid circulates and blocks the oil passages in the valve body, jerking issues will occur. Over time, this can lead to a series of transmission problems such as overheating, harsh shifting, and slipping. 3. Break-in period: Slight jerking during driving is normal during this period because the vehicle's power output and component engagement are not at their optimal levels. Additionally, the transmission control module has a self-learning mechanism that continuously adjusts oil pressure for smoother gear shifts.
16
5
Share

Does a private car need to go through the inspection line in its 6th year?

Private cars need to go through the inspection line in their 6th year. Below is the relevant information about vehicle annual inspection: 1. Initial inspection: The inspection conducted by motor vehicles to apply for a license plate is called the initial inspection. The purpose of the initial inspection is to verify whether the motor vehicle meets the conditions for applying for a driving license. 2. Definition: National regulations stipulate that motor vehicles must regularly pass inspections for exhaust emissions, vehicle appearance, lights, brakes, chassis, etc., and obtain an inspection qualification mark if there are no violation records. All annual inspection dates are based on the date registered on the vehicle license. Motor vehicles must undergo safety technical inspections according to the following periods from the date of registration, commonly referred to as "annual inspection" or "annual review."
3
2
Share

What are the differences between the Corolla 1.2T and 1.5L?

Here are the differences between the Corolla 1.2T and 1.5L: 1. Different engines: The 1.5L is a naturally aspirated engine; the 1.2T is a turbocharged, direct-injection engine, with turbocharging being an advanced technology. 2. Different fuel consumption and maintenance costs: Both the 1.2T and 1.5L Corolla models have a fuel consumption of just over 7L per 100 kilometers, which isn't expensive when calculated over 10,000 kilometers, so it shouldn't be a decisive factor in purchasing. In terms of maintenance costs, the three-cylinder engine and the regular four-cylinder engine don't differ much. 3. Different displacement: The 1.5L naturally aspirated engine is the most reliable, but its fuel consumption generally increases after 50,000 kilometers.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.