What is the minimum ground clearance of the Chevrolet Tracker?

1 Answers
SanBenjamin
07/30/25 6:15am
The minimum ground clearance of the Chevrolet Tracker is 158 millimeters. It is a compact SUV launched by SAIC-GM Chevrolet. Taking the Tracker 2019 435T CVT Front-Wheel Drive Yirui Edition National VI as an example, its body dimensions are: length 4411 millimeters, width 1808 millimeters, height 1633 millimeters, with a wheelbase of 2640 millimeters, a fuel tank capacity of 50 liters, and a curb weight of 1365 kilograms. The Tracker 2019 435T CVT Front-Wheel Drive Yirui Edition National VI is equipped with a 1.3T turbocharged inline 3-cylinder engine, with a maximum power of 121 kilowatts and a maximum power speed of 5600 revolutions per minute, paired with a continuously variable transmission.
Was this review help?
17
2
Share
More Forum Discussions

What is the abbreviation for Fujian license plates?

Fujian license plates are abbreviated as Min. Here is an introduction to license plates: 1. The meaning of license plates: The first character of a license plate is a Chinese character representing the provincial-level administrative region where the vehicle is registered, which is the abbreviation of the (province, municipality directly under the central government, autonomous region). The second character is an English letter representing the prefecture-level administrative region where the vehicle is registered, which is the letter code for each (prefecture-level city, region, autonomous prefecture, league). The ranking is usually determined by the provincial vehicle management office based on the status of each prefecture-level administrative region. 2. Introduction to Fujian license plates: Fujian Province has nine cities: Fuzhou, Putian, Quanzhou, Xiamen, Zhangzhou, Longyan, Sanming, Nanping, and Ningde. Each city corresponds to a specific initial letter for the license plate, as follows: Min A - Fuzhou City, Min B - Putian City, Min C - Quanzhou City, Min D - Xiamen City, Min E - Zhangzhou City, Min F - Longyan City, Min G - Sanming City, Min H - Nanping City, Min J - Ningde City.
3
2
Share

What to Do When the Engine Number or Vehicle Identification Number is Worn or Rusted?

When the engine number or vehicle identification number becomes unreadable due to wear and rust, or is already damaged, you need to apply for record filing at the local vehicle registration office. If not filed, you may be stopped and penalized by traffic police while driving on the road. Generally, it is a combination of 7 to 8 digits and English letters. In addition to the above method, the engine number can also be checked through the following 4 ways: The vehicle license shows the engine number, usually located in the second-to-last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, where each engine can only use one engine number and each engine's number is unique.
2
1
Share

In Which Gear Should an Automatic Transmission Car Be Started?

An automatic transmission car should be started in the N (Neutral) gear. Here are the relevant details: 1. Automatic Transmission: The gears in an automatic transmission car are divided into P, R, N, D, 2 (or S), and L (or 1). P (Parking) gear: P is used for parking; it utilizes a mechanical device to lock the car's rotating parts, preventing the vehicle from moving. When the engine is running, as long as the gear lever is in a driving position, the automatic transmission car can easily move. 2. N (Neutral) gear: N stands for Neutral, which can be used during startup, towing, or temporary stops (e.g., at a red light). To prevent the car from rolling on a slope, always engage the brake when in Neutral.
1
2
Share

What Causes Excessive Moisture Inside the Car?

Excessive moisture inside the car occurs because the outside weather is somewhat cold while the temperature inside the car is slightly higher, causing the water vapor inside to condense upon encountering the cold. Effective methods to remove moisture from the car: 1. Desiccants and bamboo charcoal are essential: Car owners can place several moisture absorbers or dehumidifier boxes in areas prone to accumulating moisture, such as the cabin or trunk, and remember to check and replace them regularly to keep the car dry and moisture-free. 2. Expose the car to more sunlight: Sunlight contains ultraviolet, infrared, and visible light. Especially during damp and rainy seasons, the heated car body will quickly expel the accumulated moisture inside. 3. Promptly repair peeling paint: If the paint or protective coating on the bottom or exterior of the car peels off, it may rust when exposed to rainwater, and humid air can accelerate the "deterioration" of the damaged areas. If the car is damaged, it's best to address it as soon as possible. 4. Regularly use the car audio system: During humid seasons, the chips in the car audio system become quite delicate, as moist air is most likely to corrode them. 5. Turn on the air conditioning to remove fog and moisture: Using the air conditioning's dehumidification function can help. When the air inside the car is humid, turn on the cold air mode. The car air conditioning not only regulates the cabin temperature but also effectively removes moisture from the interior.
14
3
Share

What are the consequences of having 12 points deducted from your driving license at once?

If 12 points are deducted from your driving license at once, your motor vehicle driving license will be temporarily suspended, and you will not be allowed to drive during this period. Below is a detailed introduction to the relevant regulations regarding driving license point deductions: 1. "Regulations on the Application and Use of Motor Vehicle Driving Licenses": According to Article 68 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," if a motor vehicle driver accumulates 12 points within a scoring cycle, the traffic management department of the public security authority shall detain their motor vehicle driving license. The motor vehicle driver must, within 15 days, attend a seven-day study session on road traffic safety laws, regulations, and related knowledge at the traffic management department of the public security authority where the driving license was issued or where the violation occurred. 2. Other: After the motor vehicle driver completes the study session, the vehicle management office shall conduct an examination on road traffic safety laws, regulations, and related knowledge within 20 days. If the driver passes the examination, the points will be cleared, and the motor vehicle driving license will be returned. If the driver fails the examination, they must continue to participate in the study session and take the examination again. If the driver refuses to participate in the study session or take the examination, the traffic management department of the public security authority will announce the suspension of their motor vehicle driving license.
10
5
Share

What does the zigzag lane line on highways mean?

Highway zigzag lane lines are a type of speed reduction marking, which can be categorized into transverse markings and longitudinal markings. Their purpose is to create an optical illusion of pressure when vehicles are traveling at high speeds, prompting drivers to instinctively reduce their speed in advance, thereby minimizing traffic accidents. Below is a detailed introduction to highway zigzag lane lines: 1. Speed reduction markings: These can be divided into transverse speed reduction markings and longitudinal speed reduction markings. The longitudinal speed reduction markings consist of a series of diamond-shaped dashed lines parallel to the lane dividers. They are typically installed at bridge approaches and turns. 2. Longitudinal speed reduction markings: These are a set of diamond-shaped dashed lines parallel to the lane dividers. At the starting point of the longitudinal speed reduction markings, a 30-meter transition section is set up, where the diamond-shaped dashed lines gradually widen from 10 cm to 30 cm. This is one of the new markings added in the latest national standard for road traffic markings (GB5768.2-2009).
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.