···
Log in / Register

What is the minimum ground clearance of the BMW 5 Series?

5 Answers
FinnLee
07/24/25 6:14pm

The minimum ground clearance of the BMW 5 Series is 138mm. Below are the relevant details about the minimum ground clearance of the BMW 5 Series: 1. With underbody protection: The minimum ground clearance of the BMW 5 Series is 138mm, and the chassis is equipped with underbody protection. 2. Clearance: The minimum ground clearance for sedans typically ranges between 110mm and 150mm. For sedans, a larger ground clearance (over 130mm) generally provides better off-road performance but poorer high-speed stability, while a smaller ground clearance (below 110mm) offers better high-speed stability but reduced off-road capability. Nowadays, models equipped with air suspension can automatically adjust the ground clearance, effectively meeting the dual needs of off-road performance and high-speed stability.

Was this review help?
10
5
Share
VonLeah
08/10/25 8:28am

As a seasoned driver with years of experience, I know that the BMW 5 Series typically has a ground clearance of around 140mm, which is quite common in models like the G30 generation. This design is particularly city-friendly as it prevents underbody scrapes, especially when parking or going over speed bumps. However, the BMW 5 Series leans more towards sporty handling, and the lower clearance enhances high-speed stability, but you’ll need to be extra cautious about rocks or potholes when driving on rural dirt roads. There are many influencing factors—larger tire sizes or stiffer suspensions might reduce clearance to 130mm, while adding underbody protection or switching to softer tires could slightly increase it. For daily driving, it’s best to stick with the factory settings and avoid unnecessary modifications to maintain handling safety. In short, safety comes first—always consult the manual or a professional workshop if issues arise to ensure worry-free long-distance trips.

Was this review help?
2
2
Share
Expand All
RafaelDella
09/26/25 2:54am

I usually drive a BMW 5 Series, and I think the minimum ground clearance is around 130mm to 150mm, depending on the model year and configuration. The base version might be slightly lower, while higher trims with air suspension could be a bit taller. This is quite practical for my city commuting—no worries about scraping the ground when entering or exiting garages, and it feels stable on steep slopes. However, don't expect it to be as high as an SUV; you’ll need to slow down on mountain roads to cushion the impact. Related topics: the advantage of lower ground clearance is better fuel efficiency and agile handling, while the downside is a higher risk of scraping the undercarriage. So during maintenance, always check tire pressure—too high or too low can affect the actual measurement. If you drive frequently, consider getting an OBD tool to monitor real-time data and prevent sudden issues.

Was this review help?
8
5
Share
Expand All
McFaith
11/09/25 4:58am

When researching car specifications, I found that the BMW 5 Series (such as F10 or G30 models) has a minimum ground clearance of approximately 145mm. This refers to the smallest distance between the vehicle's underbody and the ground, designed to balance handling performance for better stability during high-speed cornering. Factors affecting clearance include the suspension system and tire selection - wider tires may slightly reduce the clearance, requiring extra caution when driving through puddles during rainy or snowy conditions. In practical driving scenarios, this clearance is suitable for highway use rather than off-road conditions, helping protect the chassis from damage and prolonging its lifespan.

Was this review help?
11
4
Share
Expand All
Ellen
12/30/25 6:45am

I've test-driven quite a few BMW 5 Series models, with the minimum ground clearance generally around 140mm. It feels rock-solid on urban asphalt roads and offers excellent comfort on long-distance drives. However, when encountering bumpy rural roads, the chassis occasionally scrapes lightly. Relevant experience shows that clearance varies with load or road conditions, possibly decreasing by about 5mm when fully loaded. BMW's design excels in sporty feel but slightly compromises off-road capability, so frequent rough-road drivers might consider adding underbody protection. For daily use, avoid rushing into depressions and maintain regular checks on tire pressure and suspension—it saves money and ensures peace of mind.

Was this review help?
6
3
Share
Expand All
More Forum Discussions

What are the clever tricks for removing oil film from car windows?

Toothpaste is a clever trick for removing oil film. Toothpaste contains abrasive particles that can provide a grinding effect. When using toothpaste to clean oil film, it is important to apply the right amount of pressure and wipe evenly to better clean the pores on the glass surface and remove the oil film. Below are some related methods for removing oil film from car windows: 1. Using dry newspaper: After washing the car, use dry newspaper dipped in water to wipe the windows. Once the water on the newspaper dries, the oil film on the glass will also be removed. 2. Using specialized oil film cleaner: Spray the cleaner evenly on the glass, then wipe with a car wash towel or sponge for excellent cleaning results.
15
1
Share

What is the wading depth of the Range Rover Sport?

The maximum wading depth of the Range Rover Sport is 900mm. The wading depth of the Range Rover Sport is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake is below the water level when the Range Rover Sport is wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause serious damage to the engine's mechanical structure (connecting rods, pistons, crankshaft, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, the auto start-stop function must be turned off to prevent the vehicle from automatically restarting after stalling in the water, which could cause serious damage to the engine due to water intake. Judge the underwater road conditions based on the passage of the vehicle ahead and choose a suitable entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to waterlogging, observe warning water level markers, trees, and reference points such as the wheels and doors of other vehicles to judge the water depth before deciding whether to proceed. Understand your vehicle's safe wading depth. If the water depth exceeds half of the tire height or the engine's air intake, do not enter the water rashly; choose another route instead.
13
3
Share

What kind of scratches can car polishing repair?

Scratches caused by car washing or sand and stones during driving can be repaired by car polishing. Below is relevant information about car polishing: 1. Market position: From the perspective of car polishing, market demand is substantial, while supply is slightly insufficient. Particularly, there are not many enterprises with core intellectual property rights and high-quality products, resulting in an overall lack of brand effect in the industry. During periods of strong demand, the industry demand is enormous, and the development prospects are undoubtedly good. 2. Polishing steps: After the car surface is sprayed, minor defects such as coarse particles, sandpaper marks, flow marks, whitening, and orange peel may appear on the paint film surface. To compensate for these defects, grinding and car polishing are usually performed after spraying to improve the mirror effect of the paint film, achieving the requirements of brightness, smoothness, and brilliance.
10
0
Share

How to Separate Gasoline and Diesel After Mixing?

Gasoline and diesel can be separated using a thin-film evaporator. Below is an introduction to gasoline: 1. Physical and chemical properties: Gasoline is a colorless to light-yellow, easily flowing liquid at room temperature, hardly soluble in water, and flammable. Its distillation range is 30°C to 220°C, and it can explode when the air concentration reaches 74-123 grams per cubic meter. 2. Preparation method: Gasoline is produced through the fractional distillation of crude oil and the cracking of heavy fractions. During crude oil processing, units such as distillation, catalytic cracking, thermal cracking, hydrocracking, catalytic reforming, and alkylation all produce gasoline components, but with different octane numbers. For example, straight-run gasoline has a low octane number and cannot be used alone as an engine fuel. Additionally, the sulfur content varies, so gasoline components with high sulfur content require desulfurization refining. Subsequently, these gasoline components are blended, and high-octane components are added if necessary, resulting in a gasoline product that meets national standards.
18
3
Share

What are the consequences of driving a commercial vehicle without an operating license?

Driving a vehicle without an operating license on the road will not be penalized by traffic police as long as there are no traffic violations. However, engaging in commercial activities with an unlicensed vehicle constitutes illegal operation, which should result in vehicle impoundment and fines. This falls under the jurisdiction of the Transportation Bureau, not the traffic police. Below are detailed explanations about commercial vehicles: 1. Scope: Commercial vehicles refer to those approved by the competent authority at the end of the reporting period to participate in operations. This includes vehicles in good technical condition, under repair, awaiting repair, long-term parked, and those scheduled for scrapping but not yet approved by the superior authority. It does not include non-commercial vehicles of enterprises or borrowed passenger vehicles. 2. Classification: Commercial vehicles include passenger transport vehicles, freight transport vehicles, hazardous goods transport vehicles, and automobile trains.
14
5
Share

Why is one wheel of the car not turning?

If one wheel of the car is not turning, it is usually caused by the following reasons: 1. Pulling the handbrake tightly after washing the car: In winter, do not pull the handbrake tightly after washing the car, as this can easily cause the rear wheels to freeze, resulting in one tire turning while the other does not. 2. Not maintaining the wheel bearings: This can cause the bearing cage to deteriorate and lock the axle, leading to one tire turning while the other does not. 3. Rear wheels with drum brakes: There are two brake shoes inside. When the inner brake shoe is severely worn and not replaced in time, it can easily cause the brake shoe to lock, resulting in one wheel turning while the other does not. 4. Rear wheels with disc brakes: Check if the brake fluid circuit is blocked, causing the caliper to lock the brake disc, which results in one wheel turning while the other does not.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.