What is the minimum ground clearance of the Beijing Hyundai Fista?

1 Answers
LaCorbin
07/30/25 1:44am
The minimum ground clearance of the Beijing Hyundai Fista is 150 millimeters. The minimum ground clearance of the Beijing Hyundai Fista refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. If the Beijing Hyundai Fista has a higher ground clearance, its off-road capability improves. However, if the ground clearance is too high, the stability at high speeds may decrease. The Beijing Hyundai Fista is a compact car under the Beijing Hyundai brand, featuring a 4-door, 5-seat sedan body structure. The dimensions of the Beijing Hyundai Fista are 4660 millimeters in length, 1790 millimeters in width, and 1425 millimeters in height, with a wheelbase of 2700 millimeters. Generally, the ground clearance of sedans ranges between 110 millimeters and 150 millimeters, while SUVs have a ground clearance between 200 millimeters and 250 millimeters. However, the ground clearance of the Beijing Hyundai Fista is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the load variations of the Beijing Hyundai Fista. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-maintained roads, vehicles with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, vehicles with higher ground clearance are preferable to avoid damage to the chassis.
Was this review help?
6
4
Share
More Forum Discussions

Geely 7-Speed Dual Clutch Transmission Review?

Geely 7-speed dual clutch transmission review is as follows: 1. The dual clutch transmission, also known as DCT, is different from the general automatic transmission system. It is based on the manual transmission but not an automatic transmission. In addition to the flexibility of the manual transmission and the comfort of the automatic transmission, it can also provide uninterrupted power output. 2. Advantages of dual clutch transmission: simple structure, low maintenance cost, high transmission efficiency, fast shifting, and good fuel economy. In addition, dual clutch transmissions are divided into dry and wet types. The dry type uses air cooling for heat dissipation, but the effect is not good and it is prone to failure.
12
5
Share

What is the small black stick on the dashboard of the 10th-generation Civic for?

The small plastic stick is used for resetting the trip meter. Here is an introduction to the Civic: 1. Exterior: The exterior is stylish and elegant, with smooth body lines. The hatchback design has undergone significant changes compared to the previous model. 2. Interior: The interior craftsmanship is relatively refined, with a fashionable design and a strong sense of layering. The functional configuration is quite rich, although the extensive use of hard plastic materials results in a less-than-ideal tactile feel. The seats offer good comfort. 3. Space: The space performance is commendable, with ample legroom in both the front and rear seats. The front seats provide generous headroom, while the rear seats have slightly limited headroom. The central floor hump in the rear is not prominent, enhancing practicality. The storage compartments are functional, and the trunk space has improved compared to the older model. 4. Handling: Gear shifting is smooth, with clear gear positions, and the suspension is tuned to a moderate firmness. The steering wheel is quite responsive. The clutch pedal travel has been shortened compared to the previous model. The braking pedal requires increased pressure in the initial phase to achieve the desired braking effect.
13
4
Share

How to Activate the Horn Sound When Locking a Volkswagen?

Press the brake pedal, shift the gear lever to P position, release the brake pedal, press the one-touch start button of the SAIC Lavida twice in succession, close all four doors, and hold down the lock button on the driver's door for more than 10 seconds to complete the setting for the horn sound when locking. Below is relevant information about the horn: 1. The horn sound when locking is a prompt method used to inform the driver that the vehicle has been locked. Otherwise, the driver can only determine if the vehicle is locked by checking the double flashing lights. 2. The horn is the audio signal device of the car. During driving, the driver can emit necessary audio signals as needed and required by regulations to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging and signaling. 3. Its working principle is as follows: when the horn button on the steering wheel or other positions is pressed, the current from the battery flows through the circuit to the electromagnetic coil of the horn relay. The electromagnetic coil attracts the moving contact switch of the relay to close, allowing the current to flow to the horn. The current causes the electromagnet inside the horn to work, thereby vibrating the diaphragm to produce sound.
9
0
Share

Steps for Removing and Installing the Air Filter for the 2020 A6L

Regarding the removal and installation of the air filter for the A6L, there are seven steps as follows: 1. First, open the glove compartment cover located behind the front passenger seat. 2. Locate the fixing clip on the right side of the glove compartment and pull it outward firmly. 3. Remove the fixing clip of the glove compartment cover to detach it. 4. Use both hands to squeeze the sides of the glove compartment inward to take it off. 5. After removing the glove compartment, you will see the air filter cover. Press the fixing clips on both sides of the cover firmly to remove it. 6. Pull the old air filter outward. 7. Insert the new air filter and restore everything to its original position in the reverse order of removal (pay attention to the installation direction of the air filter).
3
3
Share

Why was the Yusheng S350 discontinued?

The Yusheng S350 has not been discontinued. Below is a related introduction to the Yusheng S350: 1. In terms of appearance, the Jiangling Yusheng S350's front face, adorned with rugged lower surrounds and large headlights, exudes a strong sense of power, making it very attractive. Paired with a wide body design, it aptly highlights the reliability of the Yusheng S350 as a hardcore SUV. 2. The rear design, much like the front, is very steady, aligning well with the aesthetic preferences of most consumers. In comparison, the Nissan Terra is relatively simpler, with LED headlights that offer excellent low-beam effects, though the high beams are somewhat scattered and don't illuminate as far. 3. The Jiangling Yusheng S350 is equipped with BorgWarner's TOD on-demand four-wheel-drive system. The ECU of this system can continuously calculate the optimal torque distribution ratio between the front and rear axles based on the driver's operational intent and the vehicle's road conditions, automatically distributing torque accordingly. 4. The Jiangling Yusheng S350 also comes with an Eaton mechanical rear differential lock. When there's a significant speed difference between the left and right wheels, the Eaton differential lock can automatically lock both wheels, enhancing the vehicle's safety in rain, snow, and various complex road conditions, while also lowering the driving threshold for off-road beginners.
8
0
Share

How to Use the Grand Cherokee 4WD System?

The Grand Cherokee 4WD is electronically controlled and does not require manual operation. Simply activate the 4WD system by pulling the 4WD mode switch located in the center console to engage 4WD mode. The Jeep Grand Cherokee's full-time 4WD system can comprehensively adapt to various road conditions. Introduction to the Grand Cherokee 4WD system: 1. The Grand Cherokee 4WD system is the Quadra-Trac II full-time 4WD. 2. It features a multi-plate clutch-type limited-slip differential at the center, with each wheel achieving lock through electronic assistance. 3. The transfer case includes a torque amplification gear, providing greater torque when needed to ensure the vehicle's self-recovery capability.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.