What is the minimum ground clearance of the 2018 Sylphy?

1 Answers
McVanessa
07/25/25 12:55am
The minimum ground clearance of the 2018 Sylphy is 115mm, which reflects the vehicle's ability to pass over obstacles or uneven ground without collision. The 2018 Sylphy is a compact car with body dimensions of 4665mm in length, 1700mm in width, and 1505mm in height, a wheelbase of 2700mm, a fuel tank capacity of 52 liters, and a curb weight of 1160kg. The 2018 Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 124PS, a maximum power of 91kW, and a maximum torque of 153Nm, paired with a 5-speed manual transmission.
Was this review help?
14
1
Share
More Forum Discussions

Can You Still Drive When the Car ESC Shows a Malfunction?

When the car's ESC malfunctions, it is best to go to a 4S shop or repair shop for inspection. Continuing to drive may pose risks. Here are some relevant details: 1. The ESC system is the car's Electronic Stability Control system, which is part of the driving assistance system. If the ESC system is damaged, the car may lose control under certain circumstances, which can be very dangerous. 2. There are many assistance systems in a car, such as the Anti-lock Braking System (ABS), Brake Force Distribution System (EBD), and Electronic Stability Program (ESP). These systems can help prevent the vehicle from losing control in certain situations. 3. When an assistance system malfunctions, it needs to be repaired immediately; otherwise, it may pose risks under certain conditions. A malfunction in an assistance system may not necessarily be due to the system itself but could be caused by a faulty sensor.
5
2
Share

Why is the steering wheel heavy?

Reasons for a heavy steering wheel: 1. Dirty power steering fluid. This situation is similar to how dirty engine oil affects engine power and performance. Dirty power steering fluid can cause the steering wheel to become increasingly heavy, and a lack of power steering fluid can also make the steering wheel feel heavier. 2. If it is electric power steering, check whether the fuse is burnt out, or if there is an open circuit or a short to ground in the wiring. Repeatedly turning the steering wheel while stationary or at low speeds places a heavy load on the power steering system, which can easily cause the steering gear to overheat and enter a protective mode, resulting in heavy steering. It will return to normal after cooling down, which is a normal phenomenon.
6
1
Share

Which Country is the ZF Transmission Brand From?

ZF transmission is a German brand and one of the world's top three transmission manufacturers. Below is relevant information: 1. ZF, also known as ZF Friedrichshafen, is a transmission supplier from Germany, alongside Aisin and Getrag, recognized as the world's top three transmission suppliers. Headquartered in Germany, its main products include mechanical transmissions, hydraulic automatic transmissions, various gearboxes, as well as steering systems, drive axles, suspension systems, and electromagnetic clutches. 2. ZF transmissions are more suitable for high-torque output under extreme conditions, which is why they are often installed in luxury vehicles. For example, BMW and Audi from the BBA group use ZF transmission technology, and the British brand Land Rover also employs ZF transmissions. 3. ZF transmissions require maintenance after driving 2,000 to 3,000 kilometers, including replacing the transmission gear oil. The oil change should be performed when the vehicle is warm, preferably using gear oil that meets the international standard API GL-4 grade with SAE 85W/90 viscosity.
9
1
Share

How to Prevent Mice from Entering a Car Engine?

Methods to prevent mice from entering a car engine: 1. Clean the parking space or park the car in an open and clean area. Places where mice are active usually have hiding spots nearby. Organize items around the parking space to locate and destroy mouse nests. 2. Install underbody panels or wire mesh. Adding these to the car's chassis can block mice from directly entering the engine compartment, though this method is relatively costly. 3. Use scent repellents. Mice have a sensitive sense of smell and dislike strong odors. You can use mothballs, perfumes, etc., to deter them.
14
1
Share

How to Determine if Spark Plugs Need Replacement?

Methods to determine if spark plugs need replacement: Remove the spark plugs and observe their appearance color to assess their condition. Normal spark plugs have insulator skirts and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plugs are oily or have deposits but are not damaged, they can continue to be used after cleaning off the oil and deposits. If the spark plugs are severely damaged, showing signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plugs with new ones. Additionally, if the spark plugs appear black as if smoked, it indicates the wrong heat range was selected or the air-fuel mixture is too rich, with oil creeping up. Damaged spark plugs can directly cause issues such as electrical leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and most importantly, difficulty in ignition, affecting the vehicle's normal operation. Severe erosion of spark plugs, including blistering, damage, or melted and eroded electrodes, indicates that the spark plugs are ruined and should be replaced.
18
4
Share

What is the normal oil consumption for a car?

The national regulatory standard is 0.3 liters per thousand kilometers, but generally, the measured consumption is around 0.2 liters. Under normal circumstances, the reasons for engine oil consumption are as follows: 1. Oil is used to lubricate the pistons, piston rings, and cylinders. When the piston moves downward in the cylinder, it leaves a thin oil film on the cylinder wall. During vehicle deceleration, the high negative pressure generated draws some of this oil into the combustion chamber. This oil, along with part of the oil film remaining on the cylinder wall, is burned by the high-temperature combustion gases during the combustion process. 2. Oil is used to lubricate the intake valve stems. This oil is drawn into the combustion chamber along with the intake air and burned together with the fuel. High-temperature exhaust gases also burn the oil used to lubricate the exhaust valve stems. The amount of oil consumption is related to the viscosity of the oil, the quality of the oil, and the driving conditions of the vehicle.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.