What is the minimum ground clearance of the 2017 Regal?

2 Answers
DelAubrey
07/28/25 11:04pm
2017 Regal has a minimum ground clearance of 152mm. The ground clearance of the 2017 Regal refers to the distance between the lowest point (excluding the wheels) and the supporting surface, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance for the 2017 Regal improves its off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. As one of the most successful strategic models of the Buick brand, the 2017 Regal is highly favored by users for its trendy, sporty, and tech-savvy product image and comprehensive technical capabilities. The dimensions of the 2017 Regal are 4902mm in length, 1863mm in width, and 1456mm in height, with a wheelbase of 2829mm. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the ground clearance of the 2017 Regal is not static; it also depends on the load condition. Therefore, changes in the ground clearance should be considered based on the load variations of the 2017 Regal. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For well-paved urban roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance is advisable to avoid scraping or damaging the undercarriage, considering the vehicle's off-road performance.
Was this review help?
8
1
Share
DelManuel
08/12/25 3:30am
As an owner who has driven the 2017 Buick Regal, I clearly remember its minimum ground clearance is approximately 142 millimeters, or about 5.6 inches. This height is quite practical for daily city driving, especially on flat streets or in parking lots, where I almost never scraped the undercarriage. One weekend, I encountered a road construction area with uneven surfaces during a trip, but the Regal passed through steadily without any damage, which gave me great peace of mind. However, caution is needed on rural dirt roads to avoid large potholes that could cause harm. Minimum ground clearance refers to the distance from the lowest point of the chassis to the ground, affecting both passability and safety. The Regal's setting is moderate, ensuring comfortable handling while preventing undercarriage impacts. If you frequently drive on highways or in rainy conditions, the 142mm clearance also effectively prevents water ingress issues. Overall, the design is quite reliable.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

Should a Car Be Equipped with a Fire Extinguisher?

Should a Car Be Equipped with a Fire Extinguisher? A car should be equipped with a fire extinguisher, and the storage environment temperature should be within the range of -10 to 45 degrees Celsius. The placement location should be kept dry and ventilated to prevent the fire extinguisher from getting damp and corroding. The locations to place the fire extinguisher in the car are: 1. Inside the glove compartment; 2. Beside the seat; 3. Inside the trunk. The precautions for using a fire extinguisher are: 1. Do not cover the fire extinguisher with items; it should be easily accessible for quick retrieval; 2. Fire extinguishers can only be used to put out initial fires; 3. Use the fire extinguisher correctly; 4. Check the pressure of the fire extinguisher once a month; 5. Fire extinguishers have an expiration date and should be configured and replaced as required.
15
3
Share

Can You Still Drive with a Damaged Thrust Bearing?

You cannot continue driving with a damaged thrust bearing. The impact of a damaged thrust bearing should not be overlooked. In mild cases, it affects comfort, increases tire noise, and causes the vehicle to pull to one side. In severe cases, it can lead to suspension damage, resulting in steering system failure and traffic accidents. Below is a detailed introduction to car driving: Overview: Driving a car is one of the basic skills that modern people need to master. To acquire car driving (driving-a-motor-vehicle) skills, one must meet the required age and physical conditions, and undergo training and examinations on road traffic safety laws and regulations, general knowledge of automotive mechanics, and safe driving practices. Others: The permission to drive a vehicle is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formal procedure that must be issued by a specialized authority.
19
0
Share

What are the speed requirements for each gear in a manual transmission car?

Manual transmission car speed requirements for each gear are: 1. 1st and 2nd gears correspond to speeds of 5 to 20 kilometers per hour; 2. 3rd gear corresponds to speeds of 20 to 40 kilometers per hour; 3. 4th gear corresponds to speeds of 40 to 60 kilometers per hour; 4. 5th gear corresponds to speeds of 60 to 100 kilometers per hour. The functions of each gear in a manual transmission car are: 1. 1st gear is the starting gear, used for vehicle launch; 2. 2nd gear is the passing gear, used for navigating complex road surfaces and handling difficult situations; 3. 3rd gear is the transition gear, used for low-speed driving in urban areas; 4. 4th gear is the cruising gear, used for prolonged high-speed driving; 5. 5th gear is the high-speed gear, used for long-distance highway driving.
7
5
Share

How to Obtain the Vehicle Annual Inspection Sticker?

To obtain the vehicle annual inspection sticker, the vehicle owner needs to bring the original vehicle registration certificate, the owner's original ID card or a copy of the company's business license, the original compulsory traffic insurance policy, and the original vehicle and vessel tax payment receipt to the local traffic police department where the vehicle is registered. The annual inspection refers to a mandatory test for vehicles that have already obtained official license plates and registration certificates. Its purposes are: 1. To promptly eliminate potential safety hazards of the vehicle; 2. To encourage enhanced vehicle maintenance; 3. To reduce the occurrence of traffic accidents. The items inspected during the vehicle annual inspection include: 1. Checking whether the engine, chassis, body, and their accessories are clean, complete, and effective, whether the paint surface is uniform and aesthetically pleasing, whether major assemblies have been replaced, and whether they match the initial inspection records; 2. Verifying whether the braking performance, steering control, lighting, exhaust, and other safety performance meet the required standards.
17
1
Share

Under what circumstances can reverse parking be successful in one attempt?

Reverse parking can usually be successful in one attempt when the vehicle is properly aligned, the reference points are accurate, and the driver maintains a calm mindset. Overview: Reverse parking has been a mandatory test item for obtaining a small car driver's license since 2013, primarily assessing the driver's ability to maneuver the vehicle in a confined space. It is a key evaluation point in the driver's test, requiring the driver to correctly reverse the vehicle into a garage from both sides while in motion. Additional Information: The test area is 16 meters long and 6.83 meters wide. The garage is 5.25 meters long and 2.31 meters wide. Failing to follow the designated route or sequence results in disqualification. Touching the boundary lines or failing to park the vehicle properly also leads to disqualification. Exceeding the 210-second time limit for completing the reverse parking results in disqualification. Stopping midway deducts 5 points per occurrence.
13
1
Share

How Often Should a Car Sunroof Be Maintained?

Car sunroofs should be maintained every 2 to 3 months, and the maintenance steps are as follows: 1. Fully open the sunroof and gently wipe off the dust on the sunroof guide rails with a clean cloth; 2. Lubricate the moving parts and sliding pipes of the sunroof; 3. Open and close the sunroof several times, then wipe off excess lubricant with a cloth. Installed on the roof of the car, the sunroof effectively promotes air circulation inside the vehicle, increases the intake of fresh air, and also provides a broader view and meets the needs for photography and videography. Car sunroofs are categorized by function into: 1. Built-in sunroof: a sunroof with the sliding assembly located between the interior trim and the roof; 2. Pop-up sunroof: effectively promotes air circulation inside the vehicle and increases the intake of fresh air; 3. Panoramic sunroof: larger in size, featuring a full glass roof.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.