What is the minimum ground clearance of the 2017 Levin?

1 Answers
VanElle
07/30/25 7:32am
The minimum ground clearance of the 2017 Levin is 105 millimeters. The minimum ground clearance of the 2017 Levin refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles like stones and tree stumps without collision. A higher ground clearance for the 2017 Levin improves its off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. The 2017 Levin is a compact car produced by GAC Toyota, featuring a 4-door, 5-seat sedan body structure. The dimensions of the 2017 Levin E-CVT version are 4630*1775*1485 millimeters (length*width*height), with a wheelbase of 2700 millimeters. Other versions measure 4630 millimeters in length, 1775 millimeters in width, and 1480 millimeters in height, with the same wheelbase of 2700 millimeters. Generally, the ground clearance for sedans ranges between 110 and 150 millimeters, while SUVs have a ground clearance between 200 and 250 millimeters. However, the ground clearance of the 2017 Levin is not static; it varies depending on the load condition. Therefore, changes in ground clearance should be considered based on the vehicle's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a higher ground clearance is advisable to improve off-road performance and avoid damage to the chassis.
Was this review help?
8
1
Share
More Forum Discussions

What is the total loss standard for water-damaged vehicles?

Water-damaged vehicles are deemed a total loss when the vehicle is completely destroyed and cannot be repaired, or the cost of repair reaches or exceeds the actual value of the vehicle. Below is relevant information about total loss of vehicles: Actual Total Loss: This refers to the vehicle being completely destroyed and beyond repair. Constructive Total Loss: Although the vehicle can still be repaired, the cost of repair reaches or exceeds the actual value of the vehicle, making the repair neither valuable nor necessary. Therefore, it can be treated as a total loss. 3. Total Loss Calculation Formula: Total Loss Amount = [New Vehicle Purchase Price at the Time of Incident - Market Price of Intact New Parts] × (1 - Depreciation Period × Depreciation Rate) - Residual Value.
4
0
Share

What Causes the Squealing Noise in a Newly Replaced Belt?

Newly replaced belts may produce a squealing noise due to the presence of metal, stones, or other impurities on the friction surface, or because the belt tension is inappropriate. Reasons for Replacement: To ensure the normal operation of the engine and extend its service life, reliable and regular maintenance is essential. For ordinary vehicles, the engine belt should be replaced after one and a half to two years of use. If the mileage reaches 60,000 kilometers, replacement is necessary. Hazards of Belt Breakage: If the belt breaks while driving, it poses a significant safety risk. In such cases, the owner cannot replace the belt themselves and must rely on a repair shop. Considering various factors, replacement is recommended when the total mileage reaches 80,000 kilometers. Solutions for Belt Noise: If the belt makes unusual noises, first check the assembly. The noise may be caused by friction between the timing belt and the timing cover. Loosening the screws on the timing cover by half a turn can help determine if the noise disappears. Additionally, inspect the condition of the generator belt. If the noise comes from the accessory belt, it might be due to the timing belt being adjusted too tightly. Removing the generator and air conditioning power steering belts can help identify if the issue lies with these belts.
1
4
Share

How Much Water in the Passenger Seat is Considered Serious?

A small amount of water in the passenger seat is not a major concern, but if standing water forms, it becomes more serious and needs to be drained as soon as possible. Additional information is as follows: Hazards: If not addressed promptly, it can lead to mold inside the vehicle and damage to wiring harnesses or control units. Treatment: Depending on the severity of the water ingress, remove all seats from the cabin. Take out floor mats, carpets, and other components. Remove any moisture inside. Dry the carpets and floor mats in the sun. Replace any damaged control units. Electrical wiring that has been exposed to water must be cleaned to remove moisture and dampness. While addressing the interior water, always check the cause of the water ingress.
2
2
Share

How long does it take for fuel consumption to return to normal after adding fuel additive?

After using up the tank of fuel with the fuel additive, the fuel consumption will gradually decrease. Here are the specific details about fuel additives: Function: Fuel additive, commonly known as the third generation gasoline detergent (also referred to as gasoline detergent or fuel additive), is designed to address carbon deposits in the fuel system of fuel injection vehicles, quickly restore the engine to optimal working conditions, and compensate for certain deficiencies in gasoline while imparting new beneficial characteristics (such as improving atomization, reducing wear, protecting the engine, lowering emissions, etc.). Composition: Fuel additives mainly consist of more than ten components, including nano-molecules, cleaning activation factors, antioxidants, anti-corrosion agents, and demulsifiers. These are specifically developed to target harmful substances in fuel, such as sulfur, gum substances, and engine carbon deposits, thereby enhancing power, promoting combustion, providing anti-oxidation, anti-wear, cleaning, dispersing, demulsifying, anti-corrosion, and lubricating effects.
9
1
Share

What Causes Abnormal Noise from Tires?

Reasons for abnormal noise from tires: 1. There may be foreign objects on the tires, such as stones or cans stuck to them, which require timely inspection and cleaning; 2. It could be noise from the brake pads, which is likely an indication that the brake pads are nearly worn out and need replacement. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground, typically installed on metal rims. They support the vehicle body, cushion external impacts, ensure contact with the road surface, and maintain the vehicle's driving performance. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high or low temperatures while driving. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning performance.
12
4
Share

How many liters of fuel does 0.7 yuan per kilometer equate to?

Based on current fuel prices, this consumption roughly equates to 10L per 100 kilometers. Below is relevant information about fuel consumption: Fuel consumption per 100 kilometers: This refers to the amount of fuel a vehicle consumes when driving a certain distance at a specified speed on the road. It is a theoretical indicator for vehicles. Manufacturers measure this value under controlled conditions using a dynamometer installed on the vehicle's chassis, converting it into speed parameters, and then calculating the theoretical experimental fuel consumption data per 100 kilometers for the model. Road condition fuel consumption: Also known as multi-condition road cycle fuel consumption, this is calculated by repeatedly testing the vehicle's fuel consumption under specified speeds and times on designated roads. The standard specifies that each cycle includes various driving conditions, recording parameters such as gear shift timing, parking duration, driving speed, acceleration, braking, and deceleration. This method yields values that are closer to actual consumption.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.