What is the minimum ground clearance of GAC Trumpchi GM8?

How to Define Inventory Cars?

Generally refers to cars that have been in stock for more than a year without being sold. The following is relevant information about inventory cars: Check the vehicle nameplate: The nameplate contains a lot of information, including the engine model, engine displacement, and the production date of the car. Check the front windshield: The corner of the front windshield will have the production date of the glass. Unless the glass was damaged and replaced with new glass, it generally won't differ much from the production date of the entire vehicle. Check the VIN (Vehicle Identification Number): Similarly, below the front windshield, there is a 17-digit VIN code, commonly referred to as the chassis number. It is roughly divided into three parts: the World Manufacturer Identifier (positions 1-3), the Vehicle Descriptor Section (positions 4-9), and the Vehicle Identifier Section (positions 10-17). The most important part to focus on is the 10th digit, which represents the manufacturing year. If it differs significantly from the current year, it indicates a long-term inventory car. Check the engine: Under normal circumstances, the engine compartment should be relatively clean, and the engine should start quickly, run smoothly without shaking, feel vibration-free when touched by hand, and produce minimal noise inside the car.

12

2

Share

What is the fuel consumption of the Boyue?

According to the information released by the Ministry of Industry and Information Technology, the combined cycle fuel consumption of this vehicle is 7.5L/100km. Below is some related information about engine oil: 1. The role of engine oil: Also known as engine lubricant, English name: Engine oil. With a density of approximately 0.91×10³ (kg/m³), it serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and cushion shocks in the engine. It is often referred to as the 'blood' of a car. 2. Engine oil consists of two parts: base oil and additives: Base oil is the main component of lubricating oil, determining its basic properties. Additives compensate for and improve the shortcomings of the base oil, providing certain new properties, making them an important part of lubricating oil. 3. Synthetic oils are divided into: Full synthetic and semi-synthetic. Lubricating base oils are mainly categorized into mineral base oils and synthetic base oils. Mineral base oils are widely used and account for a large proportion (about 95% or more), but in some applications, products blended with synthetic base oils must be used.

1

2

Share

Will Car Wraps Get Scratched by Knives?

Car wraps will not get scratched. More information about car wraps is as follows: 1. Rain Protection: Many car wraps claim to use nanotechnology or lotus leaf technology, where water droplets do not stick and simply slide off. In reality, most cannot achieve the advertised effect. It might work well for the first week after application, but the effect gradually diminishes over time. 2. Stain Resistance: This is similar to water resistance. Many promotional videos show dirty water being splashed onto the car, with the water flowing away without leaving stains. Like the first point, this effect is temporary and usually due to a hydrophobic coating on the outer layer of the wrap. This coating loses its effectiveness quickly after exposure to sun and rain, so expecting to never wash your car again is unrealistic. Moreover, this only applies to dirty water—dust, mud, and other contaminants generally have no protective effect. 3. Scratch Resistance: This might be the most appealing selling point. Many car wraps claim to resist scratches or even self-repair, which is also unrealistic. Consider the car body itself—from production to delivery, it undergoes numerous metalworking, stamping, and painting processes, with technical costs that small manufacturers often cannot afford. At best, these wraps can only prevent scratches from reaching the car's surface, acting like a phone case where removing the wrap reveals a pristine surface underneath. However, deep scratches or collision damage will still require repairs.

9

5

Share

How much horsepower does the Passat 1.4T have?

The Passat 1.4T engine can output up to 150 horsepower, with a curb weight of 1.47 tons and a fully loaded weight (5 passengers) of 1.77 tons. Horsepower of the 2.0T low-power engine: The 330 version of the Passat is equipped with a 2.0T low-power engine, which can output up to 186 horsepower, with a curb weight of 1.57 tons and a fully loaded weight (5 passengers) of 1.87 tons. Horsepower of the 2.0T high-power engine: The 380 version of the Passat is equipped with a 2.0T high-power engine, which can output up to 220 horsepower, with a curb weight of 1.59 tons and a fully loaded weight (5 passengers) of 1.89 tons. The 1.4T engine is relatively weak: It can be seen that the power-to-weight ratio of the 1.4T Passat is less than 100, which is considered relatively weak in terms of power; the 2.0T low-power version has a power-to-weight ratio slightly above 100, which is considered adequate; the 2.0T high-power version is close to the 'good power' level in terms of power-to-weight ratio.

14

5

Share

What are the consequences of jump-starting a 12V car with 24V?

Jump-starting a 12V car with 24V may have the following consequences: During the charging process, there is a possibility of excessive heat, burned wiring, damaged charger, or battery failure, among other issues. To charge a 12V battery with 24V, several conditions must be met: 1. The charger must be an intelligent type: Generally, direct charging is not recommended unless the 24V charger has built-in current-limiting and voltage-stabilizing control circuits. Such chargers are considered intelligent and can be used for charging. 2. Possess certain hands-on skills and relevant circuit knowledge: If the charger lacks the above functions but charging is still necessary, the wiring must be modified manually. This requires some hands-on ability and knowledge of circuits. Battery charging requires external charging equipment (such as a charger) with constant current and voltage. In the absence of relevant control circuits, external rectifier circuits (such as bridge rectifiers) can be connected at the output end to achieve the goal. 3. Calculate the required normal charging current: Simply put, the normal charging current can also be calculated based on the charger's power and the battery's power. Using a non-intelligent charger (without control circuits) to charge a 12V battery may cause the battery to "boil" immediately, leading to severe consequences. Therefore, a calculated approach can be adopted, such as directly connecting a variable resistor or several parallel 7815 regulators in series to achieve the desired result.

3

Share

What are the reasons why the Baojun 310w cannot start?

The reasons why the Baojun 310w cannot start include the steering wheel being locked, which needs to be unlocked to start; the battery being dead, requiring replacement; and circuit malfunctions, which need to be inspected and repaired. The specific reasons are as follows: Steering wheel locked: A locked steering wheel can prevent the car from starting, as this is a common anti-theft feature in many vehicles. If the steering wheel is not straightened or is turned after removing the key, the self-locking function of the steering wheel will activate. The solution is simple: just jiggle the steering wheel while turning the key to unlock it. Dead battery: A battery reaching the end of its lifespan can also prevent the car from starting. Determining if the battery is dead is straightforward—just press the horn. If the horn doesn't sound, it indicates the battery is dead or has reached its lifespan, and it can be concluded that the failure to start is due to the battery issue. If the battery is low on charge, a jump start can be attempted. Circuit malfunction: Circuit malfunctions include blown fuses, open circuits in the high-voltage coil, open circuits in the low-voltage circuit, detachment of the central ignition wire, leakage in the distributor head, or damaged spark plugs. In such cases, it is advisable to call the after-sales personnel from a 4S store for on-site inspection and repair of the circuit.

13

5

Share

What is the minimum ground clearance of GAC Trumpchi GM8?

How to Define Inventory Cars?

What is the fuel consumption of the Boyue?

Will Car Wraps Get Scratched by Knives?

How much horsepower does the Passat 1.4T have?

What are the consequences of jump-starting a 12V car with 24V?

What are the reasons why the Baojun 310w cannot start?

What is the rubber hose on the engine called?

What is the load capacity of a small SUV?

Does the vehicle license have an expiration period?

What causes the leakage of air conditioning water in the front passenger side of a Xiali N5?