What is the minimum and maximum speed for straight-line driving?

2 Answers
DeLillian
07/29/25 6:19pm
Straight-line driving speed should be between 30 km/h and 40 km/h, meaning it should not be lower than 30 km/h or higher than 40 km/h. Below are some relevant techniques for straight-line driving: Selecting a reference point: When driving straight, the driver should look ahead and pay attention to both sides, choose a reference point, maintain straight-line driving, correct the direction in time, and always be aware of various traffic conditions ahead to detect and handle them promptly. Adjusting the viewing distance ahead in time: Look far and near while holding the steering wheel straight. The driver should adjust the viewing distance ahead according to the speed. At higher speeds, look further ahead; at lower speeds, look appropriately closer, and use peripheral vision to monitor the surroundings. Steering smoothly: Operate the steering wheel by pulling with one hand and pushing with the other, ensuring smooth control. Keep both hands shoulder-width apart and avoid using excessive force.
Was this review help?
13
2
Share
MacBella
08/14/25 10:58am
As a novice driver who just got my license, I remember my instructor repeatedly emphasizing the importance of speed control. When driving straight, the speed should not be too slow, as it may cause traffic congestion or even rear-end collisions. Generally, the minimum speed limit on highways is 60 km/h, while on city roads there may not be a strict requirement, but it's recommended not to go below 30 km/h. At the same time, the speed should not be too fast—the safe upper limit varies by road: typically 50 or 60 km/h in urban areas, while on highways, it depends on posted signs like 120 or 130 km/h. During practice, I found that maintaining a moderate speed range not only feels smoother but also helps with observing road conditions in advance and avoiding sudden braking. For example, once during a nighttime highway drive, I was going too fast and almost missed reacting to a speed camera. After slowing down to around 80 km/h, I felt much more relaxed. In short, new drivers should pay close attention to roadside signs and keep speed limits in mind to drive safely and smoothly.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

How to Turn on the Car's High Beam?

Method to turn on the high beam: Locate the high beam switch on the lever on the left side of the steering wheel or the light knob on the left side of the steering wheel. Then turn on the low beam, press the lever downward, and the dashboard will display an indicator, indicating that the high beam is activated. Here is some additional information: 1. High beam: The high beam emits parallel light at its focal point, with more concentrated and brighter light, capable of illuminating distant and high objects. 2. Low beam: The low beam emits divergent light beyond its focal point (between 1x and 2x the focal distance), capable of illuminating a larger area of nearby objects. The difference between high beam and low beam: high beam has a higher angle and longer distance; low beam has a lower angle and shorter distance.
4
0
Share

What tires are best for the Golf?

Golf models vary in tire specifications and sizes depending on their configurations. Taking the Volkswagen Golf 2014 1.6L Manual Fashion model as an example, it uses Hankook OPTIMOK451 tires with a size of 195/65R15. Below is an introduction to the Golf model series: 1. Volkswagen Golf: The Volkswagen Golf is a classic hatchback/compact family car launched by FAW-Volkswagen in 1974. It has seen seven generations globally, making it the most produced and best-selling model under Volkswagen. 2. Product Features: The Golf excels in detailed design, ergonomic interiors, and comfort features, ensuring all functions are user-friendly. Its comprehensive comfort and human-centric care provide drivers with a luxury car-like experience.
4
1
Share

What kind of cars usually use 98 octane gasoline?

98 octane gasoline is generally suitable for luxury cars and sports cars with more precise engines and a compression ratio above 10. Here is some information about 98 octane gasoline: 1. Introduction: 98 octane gasoline is also known as "premium gasoline." Compared to other grades of gasoline, it is more expensive but has stronger anti-knock properties, lower sulfur content, higher combustion efficiency, and is less likely to produce carbon deposits and sludge. It provides more powerful performance and makes the engine run more smoothly. 2. Disadvantages of using 98 octane gasoline in regular cars: Occasionally using 98 octane gasoline in regular cars is not a big issue, but long-term use can lead to engine malfunctions and damage.
13
4
Share

How many seconds does the Mistra take to accelerate from 0 to 100 km/h?

Mistra has two engine options. The 1.8L Mistra takes 11.8 seconds to accelerate from 0 to 100 km/h, while the 1.6T Mistra achieves this in 9 seconds. Here is some relevant information about the Mistra: 1. Model Introduction: In 2013, Beijing Hyundai developed and manufactured the first-generation Mistra specifically tailored to meet the needs and preferences of Chinese consumers. With its "A-segment price, B-segment experience," it quickly became one of the most sought-after products in the family sedan market. 2. Market Positioning: The new-generation Mistra is positioned as a mid-to-high-end sedan, offering leading-class space and intelligent technology configurations. It provides users with a more efficient travel experience and a more enjoyable driving experience, realizing users' ideal new way of intelligent living.
20
4
Share

Why does the radiator keep losing water with small bubbles?

The reasons for the radiator losing water with small bubbles are as follows: Water pipe issues: Leakage at pipe joints or the pipe itself, replace the pipe or reinforce the seal. Cylinder block issues: Cracks in the cylinder block, cylinder head gasket not tight or damaged, causing water leakage. Cooling issues: Damage or pinholes in the oil cooler seal, leading to water leakage. After the radiator boils, poor engine cooling and excessive temperature cause parts to expand, reducing the clearance between components. Additionally, high temperature reduces oil viscosity, increasing wear on parts. If not addressed immediately, the engine may overheat, leading to severe mechanical damage.
14
1
Share

Is NVH Important?

It is quite important. Automotive NVH refers to the English abbreviation for Noise, Vibration, and Harshness. This is a comprehensive indicator for measuring the manufacturing quality of a vehicle, providing the most subjective and surface-level experience for car users. NVH issues in vehicles are one of the key concerns for major automobile manufacturers and component suppliers in the international automotive industry. Below are methods to improve automotive NVH characteristics: 1. First, control the vibration and noise sources: This requires improving the structure of components that generate vibration and noise, enhancing their vibration characteristics, and avoiding resonance. 2. Improve the balance of rotating components: This can enhance the NVH characteristics of the vehicle. 3. Increase precision: Improve the machining accuracy and assembly quality of components to reduce impacts and friction between relatively moving parts. 4. Optimize fluid flow: Improve the flow conditions of gases or liquids to avoid the formation of vortices. 5. Enhance body structure: Improve the vehicle body structure to increase stiffness; apply sound waves with amplitudes equal but opposite in phase to the noise source, etc.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.