···
Log in / Register

What is the minimum age to obtain a motorcycle license?

4 Answers
DeLeilani
07/29/25 1:55am
Motorcycle licenses can only be obtained by individuals aged 18 and above, with the exact time required to pass the exam and receive the license depending on the examination process. Below is additional information: 1. Regulations: According to Article 12 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' the minimum age for obtaining a license for light motorcycles is 18, and the maximum age is 70. 2. Adding License Categories: For those who already hold a motor vehicle driver's license and wish to add additional license categories, the available options include large passenger vehicles, tractor units, etc.
Was this review help?
7
5
Share
DiZane
08/12/25 11:52am
I see many people are concerned about this issue. The age requirement for a motorcycle license is that you must be at least 18 years old to take the test, which refers to ordinary motorcycle licenses like Class E or Class D. This regulation is quite reasonable because by 18, the body is generally fully developed, with better hand-foot coordination to control the bike, and a more stable mindset to handle unexpected situations on the road. I suggest young people not rush it—wait until they reach the right age before enrolling in a driving school for the theory test and road test. If everything goes smoothly, the whole process can be completed in just a few weeks. After passing, don’t forget safety: wear a helmet, follow traffic rules, and avoid riding fast in rain or snow. Motorcycles offer freedom but come with high risks—learning at an older age is actually safer and more reassuring. I’ve personally seen too many cases of impulsive riding leading to accidents. Be patient, for your own safety and others’.
Was this review help?
13
0
Share
Expand All
KeiraFitz
10/02/25 3:17am
I remember getting my motorcycle license when I was 18, and I was so excited to finally ride legally! The age requirement is set at 18, probably because young people learn quickly but may not have fully matured mentally—riding a motorcycle requires focus and responsibility. To get the license, you need to attend a proper driving school to learn traffic rules and practical skills, then pass the exam. Back then, I made some friends at the driving school, and we had fun learning together. If you're under 18, never ride illegally—getting caught leads to heavy fines and could even affect your future license application. My advice: first, learn basic maintenance like checking tire pressure, and once you're of age, formal training will help you pick it up quickly. Riding a motorcycle is a lifestyle—safety comes first, and never let impulse push you to speed recklessly.
Was this review help?
14
5
Share
Expand All
ReaganLee
11/15/25 5:01am
The motorcycle license requires the applicant to be at least 18 years old, which is primarily designed for safety considerations. Although young people have good physical strength and quick reactions, riding motorcycles involves high risks and they are prone to accidents due to impulsiveness. By the age of 18, individuals are more psychologically mature and better able to assess dangers and control speed. I would like to remind everyone that when obtaining a license, don't just focus on getting the certificate; it's important to learn more about defensive driving techniques and emergency handling methods. Beginners are advised to practice balance on familiar road sections first. Following the rules and wearing protective gear are key to reducing the probability of accidents.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

What's the difference between maintenance done outside and at a 4S shop?

Differences between 4S shop maintenance and external maintenance: 1. Different risks: 4S shop maintenance has low risk and is guaranteed; external maintenance has high risk and no guarantee. 2. Different efficiency: 4S shop maintenance is less efficient but uses original parts; external maintenance is more efficient but does not use original parts. Benefits of 4S shop maintenance: 1. 4S shops can provide original parts and materials. 2. 4S shops can offer the most professional and reliable repair technology, professional equipment and tools, and focus on brand reputation. 3. 4S shops have a complete service process and post-repair service tracking system to ensure every repair procedure strictly follows the brand's requirements. 4. 4S shops have formal and open complaint channels and supervision systems, fully ensuring customer satisfaction. 5. 4S shops take responsibility for any disputes after repairs to guarantee your satisfaction.
9
2
Share

What is the label for fully synthetic engine oil?

Fully synthetic engine oil does not have a specific label, but the bottle will directly indicate "fully synthetic" on its exterior. The functions of fully synthetic engine oil are: 1. Between the piston and cylinder of the engine, as well as between the main shaft and bearings, there is rapid relative sliding. The oil forms a sufficiently thick oil film between the two sliding surfaces, separating the surfaces of the relatively sliding parts to reduce wear. 2. It carries heat back to the oil tank and dissipates it into the air, helping the radiator to cool the engine. 3. It cycles carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank, using the flow of the lubricating oil to wash away contaminants generated on the working surfaces of the parts. 4. It provides shock absorption and cushioning. When the pressure at the engine cylinder port rises sharply, suddenly increasing the load on the piston, piston chips, connecting rod, and crankshaft bearings, the load is transmitted through the bearings' lubrication to cushion the impact load.
17
0
Share

What to Do If You Accidentally Fill a Car Requiring 95 Octane with 92 Octane?

If a car that requires 95 octane gasoline is accidentally filled with 92 octane, do not start the vehicle. Immediately contact a 4S shop or a maintenance technician to drain and clean the fuel tank and fuel lines, followed by a comprehensive engine inspection. The consequences of using 92 octane in a car designed for 95 octane include: 1. Reduced engine power. 2. Lower idle speed. 3. Increased fuel consumption. 4. Engine stalling or failure to start. Introduction to gasoline: 1. Gasoline is refined from various petroleum-derived components such as straight-run gasoline, catalytic cracking gasoline, and catalytic reforming gasoline, blended with high-octane components. 2. Gasoline is primarily used as fuel for spark-ignition internal combustion engines in automobiles.
15
0
Share

What Type of Engine Oil is Best for the First Car Maintenance?

Every vehicle comes with a manufacturer-recommended standard original engine oil. If not specifically specified, using the original engine oil is sufficient for both the first maintenance and subsequent regular services. Types of engine oil: Mineral Oil: Mineral oil is directly refined from crude oil without the addition of other additives. It is suitable for low-displacement, non-turbocharged vehicles or those with infrequent usage, typically around 5,000 kilometers in half a year. If you don't drive often, mineral oil offers the best economic value. Semi-Synthetic Oil: Semi-synthetic oil is a blended product made by mixing mineral oil and full synthetic oil through a compounding process. It offers the best cost-performance ratio and is a great choice for drivers who frequently use their cars. Its oil change interval is around 7,500 kilometers, making it suitable for most vehicle models. Full Synthetic Oil: Full synthetic oil is more expensive compared to the previous two types but offers superior performance. Whether in terms of stability, lubrication, low-temperature performance, or cleanliness, it far outperforms mineral oil and semi-synthetic oil. Its replacement interval exceeds 10,000 kilometers, and many car owners experience noticeable performance improvements after switching to full synthetic oil.
9
5
Share

Why does the screen go black when connecting Apple CarPlay to the car?

The main reasons for the black screen when connecting Apple CarPlay to the car are: In-vehicle computer crash: As modern cars have numerous electronic components, especially with the continuous updates of car connectivity systems, many vehicles' multimedia systems have become increasingly complex, leading to more frequent occurrences of dashboard screen malfunctions. You can try turning off and restarting the vehicle and its onboard computer to see if the screen display recovers. If the problem persists after repeated attempts, schedule a visit to a 4S shop for module inspection, software refresh, or repair. Connector detachment: Since many wiring connections use direct plug-in connectors, they may become detached or loose due to bumpy road conditions or original installation quality issues, resulting in dashboard screen failure. This can only be resolved by visiting a 4S shop or repair shop to disassemble the rear of the screen and securely reconnect the connectors.
10
1
Share

Why does the steering wheel shake when the car reaches 100 km/h?

In most cases, steering wheel vibration at 100 km/h is caused by wheel dynamic balance issues. The solution is to add counterweights to the wheels while they are in motion to correct the balance at various edge points - this process is called dynamic balancing. Other possible causes include shock absorber failure, frame deformation, or excessive clearance between the driving and driven gears of the final drive. It is recommended that owners regularly perform dynamic balance checks on their wheels. The dynamic balancing procedure is as follows: 1. Remove the logo in the center of the hub, install the dynamic balancer for measurement, and input the data. 2. Measure the rim width and input the data. 3. According to the computer-calculated data, add appropriate dynamic balance weights to both the inner and outer sides of the rim. When the re-test meets the standard, the process is complete.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.