What is the mileage for the first maintenance of the Enjoy?

2 Answers
DelFrank
07/24/25 2:40pm
The first maintenance for the Enjoy is generally at 5,000 kilometers or 6 months, whichever comes first. This regulation can be checked in the maintenance manual or confirmed by calling the 4S store. According to the regulations, the documents required for the first car maintenance include: driver's license, vehicle registration certificate, first maintenance voucher, purchase invoice, maintenance manual, owner's ID card, and other relevant documents. The first car maintenance generally includes the following items: Check whether the level of the car's coolant meets the specified requirements. Check the fluid levels of the brake and clutch. Check whether the oil level in the power steering fluid reservoir meets the specified requirements. Check for any oil leakage at the interfaces of the system's oil pipes. Check the battery fluid level and the level of the windshield washer fluid. Check the tension and aging condition of the belts for the generator, air conditioner, water pump, and power steering pump. Check whether all front and rear lights of the car are functioning (including headlights, width lights, turn signals, brake lights, reverse lights, and fog lights). Check the tire pressure and wear condition of the car's tires, tighten the tire bolts to the specified torque, replenish the tire pressure to the specified value for the model, and rotate the tires based on wear conditions. Check whether the car's exhaust emissions meet the standards. Generally, no appointment is needed for the first maintenance at a 4S store; you can drive there directly. However, some 4S stores may have many vehicles for maintenance, which could result in a long wait. To avoid this, it is best to call ahead and make an appointment. Generally, the first maintenance should not be postponed. However, in certain special circumstances, you can communicate with the 4S store in advance. If they agree, postponement is possible. It is important to note that if the car develops a fault after postponement, the 4S store may refuse to cover it due to the delay, which carries some risk.
Was this review help?
5
4
Share
LeEmilio
08/11/25 8:25am
I just bought the Honda Envix not long ago, and the first maintenance should be done at around 5,000 kilometers. I had it done at the 4S shop, mainly changing the engine oil, checking the filters, and basic components. During the break-in period of a new car, the engine produces metal powder, and timely cleaning can prevent wear. If not done on time, engine wear will increase, repairs can be costly, and it may affect warranty rights. I suggest car owners set a phone reminder to not miss this critical point. Regular maintenance keeps the car running longer and saves trouble. Check the user manual for specific mileage details, as each car may vary slightly.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

What is the original battery of the Roewe RX5?

The original battery of the Roewe RX5 is manufactured in the UK. The vehicle adopts the 'Blue Core' high-efficiency power technology, equipped with 2.0T and 1.5T in-cylinder direct injection turbocharged engines. Specifically, the 2.0T engine delivers a maximum power of 220 horsepower and a peak torque of 350 Nm, with a combined fuel consumption as low as 8.1L per 100 km. The 1.5T engine offers a maximum power of 169 horsepower and a peak torque of 250 Nm, with a combined fuel consumption of only 6.8L per 100 km. Below are the relevant details: 1. Configuration: Inheriting Roewe's Rhythm design language, the vehicle comes standard with a new-generation Rhythm Pro wing grille. It features a 2700mm wheelbase and the largest panoramic sunroof in its class, with an opening area of 0.86m². 2. Powertrain: Equipped with SAIC's world-class 'Blue Core' powertrain, it not only fully complies with the strictest China VI emission standards but also balances high efficiency and fuel economy, delivering a maximum power of 169 horsepower and a maximum torque of 250 Nm. The MIIT-rated combined fuel consumption is as low as 6.5L per 100 km. The new vehicle also comes with 18-inch precision-machined aluminum alloy wheels and high-quality German Continental brake calipers.
20
4
Share

How many times should a car be inspected annually after 15 years?

After 15 years, a car should undergo 2 annual inspections. Additional information: According to Article 16 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China", motor vehicles must undergo safety technical inspections within the following periods from the date of registration: 1. Passenger vehicles for commercial use: inspected once a year within 5 years; inspected every 6 months after exceeding 5 years. 2. Trucks and large or medium-sized non-commercial passenger vehicles: inspected once a year within 10 years; inspected every 6 months after exceeding 10 years. 3. Small and mini non-commercial passenger vehicles: inspected once every 2 years within 6 years; inspected once a year after exceeding 6 years; inspected every 6 months after exceeding 15 years.
4
4
Share

What is the fuel consumption of the Corolla 1.2t?

The fuel consumption of the Corolla 1.2t is 6L/100km. Here are some methods to reduce fuel consumption: 1. Turn off the engine when parked: If the traffic light is red for a long time or in case of traffic congestion, turning off the engine can reduce fuel consumption. It also avoids excessive wear on the engine caused by prolonged idling. 2. Choose the correct gear: Avoid unnecessary high-speed operation of the engine. For manual transmission cars, avoid driving at high speeds in low gears. Of course, driving at low speeds in high gears is also not good for the car. 3. Avoid sudden acceleration and braking: Sudden acceleration and braking can lead to excessive fuel consumption. They also cause significant damage to the car, easily resulting in excessive carbon deposits in the cylinders, which affects the engine's combustion efficiency and increases fuel consumption.
1
2
Share

What happens if you use 92 gasoline in a sixth-generation Camry 200G?

You can use it, but strictly speaking, there are certain differences between using 95 gasoline and 92 gasoline in the engine. The specific details are as follows: 1. Compared to 92 gasoline, 95 gasoline has a higher octane rating. 2. The higher the octane rating in gasoline, the better the anti-knock performance for the engine. Additional information: The occurrence of engine knocking mainly depends on the knock sensor in the engine. When the knock sensor detects engine knocking, it will send feedback to the engine control unit to adjust the ignition timing and fuel injection quantity, ultimately aiming to change the engine knocking situation. Therefore, using 92 gasoline, the engine can adapt and suppress adverse conditions, but the engine's efficiency will decrease, preventing it from fully utilizing its overall performance.
6
4
Share

What are the hidden features of the Cadillac XT6?

Cadillac XT6's hidden features are on the key fob. The Cadillac XT6 key fob has five buttons: lock, remote start, trunk release, vehicle locator, and unlock. To lower all four windows: press and hold the unlock button. To raise all four windows: press and hold the lock button. Below is relevant information about the Cadillac XT6: 1. Dimensions: The new vehicle measures 5223/1879/1492mm in length/width/height, with a wheelbase of 3109mm. 2. Powertrain: The new Cadillac CT6 is equipped with a 2.0T inline four-cylinder engine featuring cylinder deactivation technology, delivering maximum power of 237 horsepower and peak torque of 350 N·m, meeting China VI emission standards. The transmission system is paired with a 10AT gearbox.
16
1
Share

What brand is the dedicated engine oil for Porsche?

Porsche uses 0W40 engine oil. The following is a related introduction about what engine oil Porsche uses: 1. 0W40 model: Due to the high efficiency of engine operation, the internal temperature of the engine is very high during operation. Using engine oil with a high viscosity value can protect the engine better and reduce the internal temperature of the engine more effectively. 2. Quality of engine oil: Base oil and additives. The quality of the base oil depends on: the source of crude oil and refining technology, synthetic process technology. The most authoritative method to distinguish the authenticity of engine oil is to directly give it to a car repair technician for testing. 3. Selection of engine oil: The selection of engine oil should be based on the requirements of the engine. It is unnecessary to use overly advanced engine oil on engines with lower requirements, nor can lower-grade engine oil be used on engines with higher requirements.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.