What is the mileage for the first maintenance of Audi A3?

What Do Torque and Horsepower Mean in Cars?

Torque and horsepower are two important performance parameters of an engine. Here are the detailed explanations: 1. Torque: Refers to the work done by the piston reciprocating in the cylinder over a certain distance per cycle. The unit is Newton/meter (N·m) or kilogram/meter (Kg·m). The work done per unit distance is torque, which reflects the vehicle's load capacity within a certain range. Under constant engine power conditions, torque is inversely proportional to engine speed - the faster the speed, the smaller the torque; the lower the speed, the greater the torque. 2. Horsepower: Refers to the work a car can perform per unit time. Horsepower is a unit of power and a physical quantity that measures a car's maximum speed. 1 horsepower equals the work required to lift a 75kg object by 1 meter per second, with the unit being PS. The greater the horsepower, the faster the car accelerates in a straight line on flat roads.

14

1

Share

How many days after running a red light will I receive a text message?

After running a red light, the illegal photo notification message is usually received within 3 to 7 days, and at the latest, around 13 days. However, some cities now offer "instant electronic police capture alerts," where you can receive a text notification within 5-10 minutes of being captured. But this notification does not equate to a traffic violation; it merely serves as a capture alert. The final determination of whether it constitutes a violation takes 3-7 days. If it is indeed a violation, you will receive another text message notification. For traffic violations captured by surveillance cameras, vehicle owners generally do not receive the violation notification immediately. There is a delay, and the duration of this delay can vary. This is because after the electronic camera captures the violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center. It is then compiled and forwarded to the relevant traffic police department staff for verification. Only after the violation is confirmed will the system automatically retrieve the vehicle owner's phone number based on the license plate information and send the violation details via text message. The owner will then receive the corresponding violation notification. After receiving the violation notification, the vehicle owner must go to the traffic police department where the violation occurred to handle the matter within one month before the vehicle's annual inspection. Generally, if a vehicle owner suspects they have committed a violation, they can use 15 days as a benchmark. If no violation notification is received after 15 days, it is likely that no violation was recorded. Traffic violation query methods: Traffic violation queries refer to checking motor vehicle violations of traffic management regulations through online platforms or query terminals. There are five ways to check for traffic violations: traffic branch terminal queries, traffic violation website queries, phone queries, mobile text message queries, and mobile app queries. Website query: You can search for "vehicle violation query" and enter your vehicle information to check. Phone query: To inquire about violations, you can call the local 114 (area code + 114) or 12580 for traffic violation confirmation. Violations can only be processed at the traffic police department where the violation occurred or where the vehicle's license plate was issued. For on-the-spot violations, such as those directly caught by a traffic officer, they must be handled at the location of the violation. Mobile text message query: Open your phone's text message interface; enter "WZ [license plate number] [license plate color]" in the message content; enter "1062650001" as the recipient and click send. Mobile app query: Open the Traffic Management 12123 app, select "violation query," and find any unprocessed violations to clear them.

13

3

Share

Which city does the license plate Wan H represent?

Wan H is the license plate of Anqing City, Anhui Province. The vehicle registration authority code consists of 2 characters, composed of Chinese characters and English letters. The Chinese character is the abbreviation of the province, autonomous region, or municipality directly under the central government, and the English letter is the code of the vehicle management office. Wan is the Chinese character abbreviation of Anhui Province, and H is the code of the vehicle management office of Anqing City, so Wan H is the license plate of Anqing City, Anhui Province. The introduction of the license plate numbering is as follows: 1. Civil vehicle license plates have the name of the province, municipality, or autonomous region and the code of the issuing and supervising authority, which is an uppercase English letter. The following vehicle number is generally a 5-digit number, ranging from 00001 to 99999. 2. The special license plate number for new energy vehicles is 6 digits. When the number exceeds 100,000, English letters such as A, B, C, etc., are used instead, where A represents 100,000, B represents 110,000, C represents 120,000, and the last letter Z represents 350,000.

13

0

Share

What Does ETC Displaying 'Label Detached' Mean?

ETC displaying 'Label Detached' means the device is currently unusable and needs to be reinstalled and reactivated at the original bank processing point, designated agent offices of the traffic management bureau, or any expressway ETC service center. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU. A red light will briefly illuminate, and the OLED screen will display 'Tag Invalid' or 'Please Insert Card,' indicating the device is functioning normally. Clean the front windshield, ensuring the glass surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device. ETC Activation Method: Insert and remove the ETC card twice consecutively until the electronic tag screen displays 'Bluetooth On.' If 'Tag Invalid' appears when inserting and removing the card twice without the electronic tag attached, this is normal and does not affect activation. Alternatively, press the button on top of the electronic tag to enable Bluetooth directly. Turn on your phone's Bluetooth and open the corresponding mobile app (usually with a download QR code on the electronic tag) to access the device activation interface. Click 'Connect Device' and wait patiently for the 'Connection Successful' prompt. Once connected, upload a photo of the vehicle's front to complete activation.

2

3

Share

What to Do When the Car Window Won't Roll Up?

If the car window won't roll up, you can initialize the window lift switch. The initialization method is as follows: 1. First, turn on the ignition switch, pull the lift switch upward to raise the window to the top, and continue holding for more than 3 seconds; 2. Release the switch and immediately press it down to lower the window to the bottom and hold for more than 3 seconds; 3. Pull the switch upward again to raise the window to the top, and continue holding for more than 3 seconds to complete the initialization. Below is an introduction to why the window may not roll up: 1. After prolonged use of the car, the rubber guide channels of the window glass may accumulate dust or suffer from rubber aging, often causing the window to rise slowly or stop at a certain position. Some windows may tilt to one side while rising, making it difficult to roll up. Incorrect operation of the lift switch can also cause issues with the window regulator. 2. The correct way to use the lift switch is: when raising the window, pull the switch all the way up, and when lowering it, press it all the way down. Avoid operating the switch in small increments, as this can cause the contacts to instantly bear a strong current and burn out the switch.

13

2

Share

Why does the engine fault light come on before starting the car?

The engine fault light coming on before starting the car is a normal self-check phenomenon, indicating that the engine is not yet working. Before the car is started, it enters a self-check state where the engine fault light will illuminate, and it will turn off after the car starts normally. If the engine fault light remains on after the car starts, it indicates a problem with the engine's working condition. Below are the reasons why the car engine fault light stays on: 1. Poor gasoline quality can lead to incomplete combustion of the air-fuel mixture in the cylinder, causing the fault light to stay on and easily leading to carbon buildup. 2. Excessive engine mileage can weaken the spark plug's working characteristics, causing the engine fault light to stay on. 3. Excessive carbon buildup can make ignition difficult, leading to ignition coil failure, poor ignition, incomplete combustion of the air-fuel mixture, and causing the fault light to stay on. 4. Older vehicles with mechanical aging can result in poor engine conditions, causing poor combustion and ignition, leading to the engine fault light staying on. 5. Faults in certain sensors or the computer board itself can cause the engine fault light to stay on.

14

1

Share

What is the mileage for the first maintenance of Audi A3?

What Do Torque and Horsepower Mean in Cars?

How many days after running a red light will I receive a text message?

Which city does the license plate Wan H represent?

What Does ETC Displaying 'Label Detached' Mean?

What to Do When the Car Window Won't Roll Up?

Why does the engine fault light come on before starting the car?

How long after the Subject 3 exam can you check the results?

How to Adjust Brake Pedal Height?

What are the reasons for no air coming out of the car air conditioner?

What to Do If the First Maintenance Mileage Has Not Been Reached?