What is the mileage for the first engine maintenance?

1 Answers
VanGraham
07/29/25 11:49pm
Engine first maintenance is at 5,000 kilometers, but some models require it at 8,000 kilometers. Car maintenance schedule: Different manufacturers have varying regulations for the first maintenance date, mostly at 3 months or 5,000 kilometers, whichever comes first. It's advisable not to delay maintenance, as cars are covered under nationwide warranty service. Regardless of where the car was purchased, you can go to any local 4S store for maintenance. First maintenance items: The basic items for first maintenance include engine oil and oil filter replacement. Some direct injection engines might require adding fuel additives. During car maintenance, remember to ask the technician to inspect the car chassis for any oil leaks or seepage, and address any issues as early as possible.
Was this review help?
17
0
Share
More Forum Discussions

What Needs to Be Replaced During the First Maintenance?

The first maintenance requires the replacement of: engine oil, oil filter, and air filter. The purposes of the first maintenance are: 1. To ensure the vehicle's optimal performance condition; 2. To enhance driving safety; 3. To reduce engine noise; 4. To extend the vehicle's service life. Other items included in the first maintenance are: 1. Replacing engine oil and oil filter, cleaning the air filter, and checking the generator belt and wiper blades for any damage; 2. Checking the levels of various fluids to ensure they are normal; 3. Inspecting tire pressure for normalcy, and checking for uneven wear, bulges, or damage; 4. Examining the vehicle's undercarriage, including brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Verifying the proper functioning of all switches and lights in the vehicle.
12
0
Share

Why does the Jetta VS5 require 95-octane gasoline?

The reason the Jetta VS5 uses 95-octane gasoline is to ensure stable engine operation and optimal combustion conditions with higher-octane fuel. Avoid overfilling the tank: Overfilling can easily block the fuel tank vent. Once the vent is blocked, the internal pressure of the tank will drop below normal levels, leading to poor fuel supply or even fuel cutoff. Overfilling also increases the vehicle's weight, thereby increasing fuel consumption. Additionally, gasoline can deteriorate, posing potential safety hazards. Refuel before the warning light appears: While driving, always monitor the fuel gauge. When the indicator shows only a quarter of the tank remaining, it's time to refuel. If the tank remains empty for too long, the temperature difference between inside and outside can cause condensation inside the tank. This moisture can corrode the tank, affect fuel quality, and increase the engine's workload.
10
3
Share

What Does the Engine Oil Grade Mean?

Car engine oil grade refers to the viscosity and quality of the oil. Engine oil is composed of base oil and additives, and its classifications include full synthetic oil, semi-synthetic oil, and mineral oil. The oil change process is as follows: 1. Remove the drain plug to discharge the used oil; 2. Remove the oil filter; 3. Wipe the filter housing and replace the oil filter; 4. Add engine lubricating oil; 5. Check for any oil leaks. The functions of engine oil are: 1. Lubricating the engine's pistons and cylinders; 2. Assisting in cooling the engine; 3. Cleaning carbon deposits from engine components; 4. Absorbing acidic substances on the surface of parts; 5. Reducing friction resistance between surfaces.
10
5
Share

How to Replace an Angle Valve?

Replacing an angle valve involves the following steps: Turn off the water supply by closing the main valve, then remove the metal hose connected to the angle valve by turning it counterclockwise. Use a specialized wrench to grip the triangular position of the angle valve and turn it counterclockwise to remove. Avoid using excessive force during removal. Once removed, install the new angle valve. An angle valve, also known as an angle stop valve, is similar to a ball valve, with its structure and characteristics derived from modifications of the ball valve. The key difference is that the outlet and inlet of an angle valve form a 90-degree right angle. Angle valves are also referred to as triangle valves, angle-shaped valves, or corner water valves, named for the 90-degree turn the pipeline makes at the valve.
9
2
Share

What brand of car is ranqerover?

ranqerover is the Land Rover Range Rover, which is one of the world's top four-wheel-drive luxury car models today. Advantages of the Land Rover Range Rover: The Land Rover Range Rover maintains its classic boxy design, with its greatest strengths being spacious interiors, excellent handling, and fuel efficiency. It comes with three different engines, each with its own advantages, providing ample power and enhancing the experience for both passengers and drivers. Car Performance: In terms of off-road capabilities, the new Range Rover's body rigidity is more than double that of the previous generation, with improved approach angles and ground clearance. Its air suspension system can adjust the vehicle height from a minimum of 208mm to a maximum of 281mm. Although it features a rare four-wheel independent suspension system for an off-road vehicle, the manufacturer states that the suspension travel is 50mm and 100mm more than the previous generation's non-independent suspension, showcasing the engineering achievements of the new model.
2
2
Share

What is the method for replacing the reverse light on the Changan CS35?

Changan CS35 reverse light replacement method is: 1. Disconnect the power supply and remove the dust cover on the back of the light; 2. Press the rotating handle at the rear of the light and unscrew it; 3. Replace with a new light, and after installation, reattach the dust cover. Taking the 2017 Changan CS35 as an example, it belongs to the small SUV category, with body dimensions of: length 4170mm, width 1810mm, height 1670mm, and a wheelbase of 2560mm. The 2017 Changan CS35 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 125PS, maximum power of 92kW, maximum torque of 160Nm, and is paired with a 5-speed manual transmission.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.