What is the MIIT fuel consumption of the 10th generation Accord?

1 Answers
DiHope
07/30/25 6:27am
The comprehensive fuel consumption of the 10th generation Accord as per MIIT standards ranges between 4.2 to 6.4 liters per 100 kilometers. Below are the details about the 10th generation Accord: 1. 2021 10th generation Accord: It is a mid-size sedan. 2. Body dimensions: Length 4893mm, width 1862mm, height 1449mm, wheelbase 2830mm, minimum ground clearance 150mm, curb weight 1495kg. 3. Configuration: The 2021 10th generation Accord features a MacPherson strut front suspension and a multi-link rear suspension. 4. Powertrain: Equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 194PS, maximum torque of 260Nm, and maximum power of 143kW, paired with a continuously variable transmission (CVT).
Was this review help?
15
5
Share
More Forum Discussions

What speed is considered speeding for a car?

When a motor vehicle is driven on the road, exceeding the speed limit in any speed-restricted zone constitutes speeding and is subject to penalties as per regulations. Speeding <50%: Exceeding the speed limit by less than 10% will not be penalized for the time being; exceeding the speed limit by more than 10% but less than 20% will result in a fine and 3 demerit points; exceeding the speed limit by more than 20% but less than 50% will result in a fine and 6 demerit points. Exceeding the speed limit by 50% or more: Exceeding the speed limit by more than 50% but less than 70% will result in a fine and 12 demerit points, and may also lead to the revocation of the driver's license; exceeding the speed limit by 70% or more will result in a fine and 12 demerit points, and may also lead to the revocation of the driver's license.
2
1
Share

What needs to be replaced in a 30,000-kilometer maintenance?

For a 30,000-kilometer car maintenance, the items to be replaced include engine oil, oil filter, air filter, fuel filter, throttle cleaning, spark plug replacement, etc. Additionally, depending on the vehicle's condition, some 4S shops may recommend other maintenance items, which the car owner should consider and decide based on the actual situation. The following are the benefits of maintenance: 1. Ensure the vehicle is in excellent performance condition. 2. Improve the vehicle's efficiency and reduce the wear and tear of its parts and tires. 3. Enhance driving safety. 4. Prevent vehicle issues that could lead to hazards. 5. Reduce noise and environmental pollution. 6. Maintain the vehicle's appearance and prevent damage.
16
3
Share

What materials are needed for car inspection?

For car inspection, you need to bring the vehicle registration certificate, the ID card of the vehicle owner, and a valid compulsory traffic insurance policy to the vehicle inspection station. For vehicles within six years of age: Vehicles that meet the 6-year exemption conditions will be exempted from the on-site inspection (i.e., vehicle testing), but they still need to apply for an annual inspection compliance label every two years (i.e., the label affixed to the front windshield, which has now been digitized nationwide). For vehicles over six years of age: You need to drive the vehicle to the nearest inspection station with the registration certificate and a valid compulsory traffic insurance policy for on-site inspection.
20
0
Share

What are the reasons for no response from the spring brake?

The reasons for no response from the spring brake may be: the adjusting rod is adjusted too much; the callback is not in place; clutch issues, inspect or replace the booster pump; the brake is too low or there are no brake pads, the air pipe is blocked or the wheel cylinder is faulty. Spring Brake: Also known as the strong spring-type braking system, commonly used in large vehicles such as trucks, it mainly uses compressed air as the power source for the braking system. Advantages of Spring Brake: If the vehicle's braking system loses pressure or has insufficient pressure due to reasons like pipeline leakage, the parking brake's strong spring will fully engage, achieving the braking effect with high safety.
17
4
Share

How much air should be put in motorcycle tires?

For most common motorcycles, the front tire pressure should be inflated to 170-200 kPa (1.70-2.00 kg/cm²), while the rear tire pressure should be 200-250 kPa (2.00-2.50 kg/cm²). Tire: A tire is a circular elastic rubber product assembled on various vehicles or machinery that rolls on the ground. Usually mounted on metal rims, it supports the vehicle body, absorbs external shocks, maintains contact with the road surface, and ensures driving performance. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, lowering driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components.
8
2
Share

Is it better to replace 2 tires or all 4?

Tires can be replaced either 2 at a time or all 4. When replacing 2 tires, it's essential to replace both on the same axle. Tires are the only components of a car that make contact with the ground. Some car owners only replace the tires on the drive wheels when changing tires. For instance, some front-wheel-drive vehicle owners may only replace the two front tires, while some rear-wheel-drive vehicle owners might only replace the two rear tires. In fact, this practice is acceptable. More details are as follows: 1. Tires are rubber products and will age over time. It is recommended that car owners replace their tires every four years, even if the mileage is low during those four years. 2. Since tires can also age from prolonged disuse, it's important to check the production date when purchasing new tires.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.