What is the method to start a manual transmission car?

[DiSamantha]

Manual transmission car starting method is: 1. Press the clutch pedal all the way down; 2. Push the gear lever to engage the 1st gear; 3. Gently press the turn signal lever downward to turn on the left turn signal, indicating the front and rear of the car; 4. Press the horn button to alert pedestrians in front of the vehicle to prepare for starting; 5. Release the vehicle's handbrake; 6. Lift the left foot until the clutch is in a semi-engaged state, and the vehicle begins to vibrate slightly; 7. The vehicle starts to move, release the clutch and gently press the accelerator. The correct sequence for stopping a manual transmission car: 1. Turn on the right or left turn signal; 2. Gently press the brake to reduce speed, observe the right rearview mirror and drive to the right; 3. When the speed is relatively low, press the clutch pedal, and pay attention to the surrounding distance when stopping; 4. After the car is stationary, shift the gear to neutral, turn off the turn signal, pull the handbrake, and turn off the engine.

[VanJuniper]

I've been driving manual transmission cars for decades, and starting the engine may seem simple but requires skill. Every time I get in the car, I first make sure the key is in my pocket or hand, then press the clutch pedal all the way down—this disconnects the engine from the transmission, protecting the components. Next, shift into neutral so the car won't jerk when the engine starts. Turn the key to ignite, wait for the engine sound to stabilize, then slowly release the clutch while gently pressing the accelerator to start moving smoothly. Remember, starting on a slope can cause the car to roll back, so use the handbrake for assistance or act quickly. In city traffic, start decisively without hesitation. With enough practice, it becomes as natural as riding a bike. When I was younger and drove a taxi, I repeated this action every day—now I could do it with my eyes closed.

[LeJackson]

When I first got my driver's license, starting a manual transmission car made me super nervous. I had to follow the steps carefully: press the clutch pedal all the way down and hold it, make sure the gearshift is in neutral. Press the start button or turn the key to ignite, and once the engine roars, slowly lift your left foot to release the clutch while gently pressing the accelerator with your right foot. At first, my movements weren't synchronized, causing the car to stall—so embarrassing I wanted to disappear. After practicing a few times, I got the hang of it; coordinating the clutch and accelerator is key, and achieving a smooth start feels incredibly rewarding. Those days of learning to drive were all about practicing this, and now I'm thrilled to be able to drive to work on my own.

[AshlynDella]

The working principle of a manual transmission car is as follows: Before starting, press the clutch to disconnect the engine from the drivetrain to avoid impact. Shift into neutral and then ignite the engine to let it idle safely. When releasing the clutch, smoothly engage the power shaft to transmit torque for a successful start. This process protects the gearbox and clutch plates from excessive wear. Some modern cars come with hill-start assist systems, which are very helpful. Just keep the operation simple and don’t overcomplicate it. Regular oil changes also extend the lifespan of components.