What is the method to set the lock confirmation sound for a Wrangler?
2 Answers
The method to set the lock confirmation sound for a Wrangler is to use the remote key to activate the lock horn, simultaneously press the unlock and lock buttons for 3 seconds, and the setup is complete when the lights flash without the horn sounding. Taking the 2021 2-door Wrangler as an example, its body dimensions are: length 4334mm, width 1894mm, height 1839mm, wheelbase 2459mm, minimum ground clearance 251mm, fuel tank capacity 70l. The 2021 2-door Wrangler is equipped with a 2.0T turbocharged engine, with a maximum horsepower of 266PS, maximum torque of 400Nm, maximum power of 195kW, paired with an 8-speed automatic transmission.
I just helped a friend adjust this a couple of days ago, setting the Jeep Wrangler's lock confirmation beep is actually quite simple. First, sit in the car without starting the engine, insert the key or make sure the smart key is within the vehicle's sensing range. Then repeatedly press the leftmost steering wheel menu button on the center console until the vehicle settings option appears. Use the directional keys to navigate to the safety and door lock settings section, scroll down and you'll see the horn confirmation tone option—just check and confirm. After setting, remember to test it: turn off the engine, get out, and press the lock button—the horn should give a short beep indicating successful setup. This feature is mainly used to confirm the locking status, especially handy when locating your car in parking lots. However, be aware that some areas have noise regulations, so using it at night might disturb neighbors.
