What is the method to reset the tire pressure warning light on Changhe Q35?
4 Answers
The method to reset the tire pressure warning light on Changhe Q35 is: 1. Turn on the ignition switch and press and hold the tire pressure monitoring reset button; 2. Release the button after hearing a beep sound. At this point, the tire pressure monitoring system will store the current normal tire pressure data, automatically clear the original data, and the tire pressure warning light will be reset. The functions of the tire pressure monitoring system are: 1. It will promptly alert you in case of rapid or slow air leakage when the tire is punctured; 2. It will alert you when tire looseness causes unbalanced friction, leading to the tire temperature reaching 70 degrees Celsius to prevent tire blowouts; 3. It will alert you when the tire pressure is below the vehicle's set limit due to prolonged lack of inflation, preventing low pressure from causing tire temperature rise and blowouts.
I've been driving the Changhe Q35 for several years now, and the tire pressure warning light coming on is quite common. I think it's important to take it step by step to ensure safety. First, park the car securely and don't drive it. Check the air pressure in all four tires—the standard value is usually around 2.3 bar, as indicated on the sticker on the driver's side door frame. Use a tire pressure gauge to measure it, and if it's low, use a pump or visit a service station to inflate the tires. Once the pressure is correct, start the engine and locate the SET button on the left side of the steering wheel. Press and hold it for three to five seconds, and the light should turn off automatically. If it doesn't respond, the sensor might be dirty or there could be a leak, so clean the wheel rim or check the tire pressure sensor connection. Safety first—only drive after the light turns off to avoid unnecessary risks. Regular tire checks during maintenance can prevent issues, saving both trouble and money.
I've only had my Changhe Q35 for half a year. As a new driver, I get a bit nervous when the tire pressure light comes on, but following a simple procedure solves it: After parking and turning off the engine, use a tire pressure gauge to check each tire's pressure. The door frame label indicates the ideal value is 2.3 bar, so just inflate to that level. Then, get back in the car, start the engine, press the menu button on the multifunction steering wheel to enter the settings menu, select the tire monitoring option, and confirm the reset. The light will turn off after a few seconds. Take your time with the whole process to avoid mistakes. If the light doesn't go off, there might be a nail in the tire requiring a patch. It's advisable to keep a simple tool kit in the car and check the pressure before heading out for hassle-free daily driving.
With over a decade of experience in automotive repair, I frequently handle the tire pressure warning light reset for the Changhe Q35. The key is to first verify if the actual tire pressure meets specifications. If normal, perform the reset procedure: turn the key to the ON position without starting the engine, then press and hold the reset button near the instrument cluster for over five seconds until the light goes off before driving. This protects the sensors and extends system lifespan. Frequent illumination may indicate internal faults requiring circuit testing or part replacement. Preventive maintenance is crucial—just conduct monthly tire self-checks.
