What is the method to reset the tire pressure warning light?

Does Deep Road Water Affect the Car?

Deep road water can affect the car and may cause the engine to stall. On rainy days when road water is deep, the following precautions should be taken while driving: 1. Drive slowly and maintain a reasonable distance: Drive straight and at a low speed in the rain. Especially on highways, it is best to keep the speed below 30km/h and maintain a safe distance from the vehicle in front, avoiding large trucks. In heavy rain, try to keep a certain distance from the vehicle ahead, avoid following too closely, and refrain from frequent overtaking. 2. Maintain good visibility: In addition to cautious driving, promptly turn on the windshield wipers when driving in the rain. In dim weather, also turn on the low beams and fog lights. If there is frost on the front windshield, turn on the air conditioning and direct the cold air toward the windshield. If the rear windshield has frost, turn on the rear windshield heater to quickly eliminate the frost and avoid obstructing the view of vehicles behind. 3. How to handle wheel skidding: If the front wheels skid in the rain, steer in the opposite direction of the skid. If the rear wheels skid, steer in the same direction as the skid, never the opposite. At the same time, ensure the wipers are functioning properly to maintain clear visibility at all times.

7

4

Share

Where is the Car Bluetooth Switch?

The car Bluetooth switch is located in the lower right corner of the main interface. Here is an introduction to related content about car Bluetooth: 1. Programming: Some mobile phone music playback programming is incompatible with the pairing codes of certain car models, so only phone calls can be answered but music cannot be played. It may be necessary to change the Bluetooth playback frequency band, etc. 2. Multimedia Music: If the car Bluetooth's multimedia music is not enabled, it needs to be set up and turned on. 3. Media Audio: If the phone's media audio is not turned off, it may cause signal interference with the Bluetooth function. Below is additional extended information: 1. Bluetooth Technology: The Bluetooth technology in car Bluetooth systems is an extension of mobile phone Bluetooth technology. 2. Transmission System: They share the same transmission system. Car Bluetooth is simply an in-car wireless hands-free system designed and developed based on wireless Bluetooth technology.

7

3

Share

Why does the J6P have insufficient power without any fault codes?

J6P has insufficient power without any fault codes for the following reasons: 1. Abnormal fuel pressure: Low fuel pressure can damage the engine's lubrication conditions, leading to poor lubrication, cooling, and cleaning, which may cause adhesive wear on components. 2. Clutch slipping: Clutch slipping can result in power loss, increased likelihood of rolling back on slopes, weak driving performance, insufficient reverse traction, and accelerated wear on the clutch and flywheel. 3. Ignition circuit failure: This may be caused by faults in components such as the electronic igniter or ignition coil, or poor connections in the low-voltage circuit. Information about the J6P is as follows: 1. Model: The J6P is a truck under FAW Jiefang. 2. Displacement: 11.1T/12.5T/7.1T.

6

1

Share

Is a bulge on the tire serious?

Automobile tire bulges are serious and should be replaced promptly. The main causes of tire bulges are as follows: 1. Crown separation: Crown separation mainly manifests as delamination at the top of the tire tread (referred to as the crown surface). The primary reason is excessive tire pressure during use, which reduces the tire's contact area, leading to early wear. During operation, rolling acceleration or poor heat dissipation causes the tread temperature to rise. The adhesion between the cord layers decreases, and the increased centrifugal force on the tread causes crown delamination. 2. Shoulder separation: Shoulder separation is a type of sidewall bulge, divided into local and overall types, commonly found between the tire tread and sidewall. It mainly appears as noticeable bulges, resembling bubbles! Some may be ring-shaped, indicating complete separation! The sidewall and tire body are clearly detached. This is caused by insufficient drying of the cord during the tire manufacturing process before rubber coating, or excessive moisture content in the rubber itself, which is a quality issue.

14

4

Share

What is the most accurate reversing point for the parking test in Subject 2?

Finding the distance between the rear wheel and the corner of the parking space, 30 centimeters is the most accurate reversing point for the parking test in Subject 2. Additionally, after some vehicles enter the parking space, when the car body is parallel to the parking space boundary line, quickly straighten the steering wheel. Then, when the lower edge of the rearview mirror aligns with the yellow boundary line, stop immediately—the car is now successfully parked. Below are the related introductions: "Non-character-shaped" reverse parking: For "non-character-shaped" reverse parking, the vehicle should be perpendicular to the target parking space. Using the B-pillar of the vehicle as a reference point and the first parking space as a marker, it is generally possible to reverse into the third parking space. "Straight-line" parallel parking: For "straight-line" parallel parking, use the car in front as a reference point. Align the car body, turn the steering wheel to the right, and when the angle between the two cars reaches 45 degrees, observe and straighten the steering wheel while reversing. If estimated correctly, the car can be parked in one go.

9

0

Share

What is the 0-100 km/h acceleration time of the Baojun Valli?

According to official data, the Baojun Valli's 0-100 km/h acceleration time is 12.1 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. For example, the Audi R8 has a maximum torque of 570 Nm and a 0-100 km/h acceleration time of 3.1 seconds. The Baojun Valli has a torque of 250 Nm and a 0-100 km/h acceleration time of 12.1 seconds. Transmission efficiency: The transmission acts as a medium for power transfer, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Baojun Valli is equipped with a CVT transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. For example, the Audi R8 has a power-to-weight ratio of 373 Hp/T and a 0-100 km/h acceleration time of 3.1 seconds. The Baojun Valli has a power-to-weight ratio of 106 Hp/T and a 0-100 km/h acceleration time of 12.1 seconds.

5

Share

What is the method to reset the tire pressure warning light?

Does Deep Road Water Affect the Car?

Where is the Car Bluetooth Switch?

Why does the J6P have insufficient power without any fault codes?

Is a bulge on the tire serious?

What is the most accurate reversing point for the parking test in Subject 2?

What is the 0-100 km/h acceleration time of the Baojun Valli?

What are the difficult points in the Subject 3 driving test?

Does Severe Rusting of Side Skirts Have a Significant Impact on the Car?

Why do the lights turn on when the car is submerged?

What are the precautions for vehicle damage assessment at a 4S shop?