What is the method to reset the tire pressure light on the 2019 Outlander?

2 Answers
Mitch
07/30/25 2:42am
The method to reset the Outlander's tire pressure is to hold the reset button until the light turns off. The steps to reset the Outlander's tire pressure light are: First, turn on the instrument panel power, then hold the reset button until the low tire pressure warning light turns off. Press and hold the reset button again until the low tire pressure warning light flashes three times and then turns off, indicating the reset is complete. Tire Pressure: When driving normally, if the tire pressure of a certain tire is low, the rotational speed of that wheel in a straight line will increase (equivalent to the diameter of the wheel becoming smaller). When the speed difference with other wheels reaches a certain value, the low tire pressure warning light will illuminate. If the low tire pressure warning light comes on, drive at a low speed, turn on the hazard lights, find a safe place to stop, check for tire leaks, and continue driving or replace the spare tire based on the actual situation. Tire pressure affects the lifespan and fuel economy of the tires. Tire pressure also impacts the vehicle's performance, so it is essential to choose the appropriate tire pressure to enhance tire lifespan and improve fuel efficiency.
Was this review help?
2
1
Share
FaithMarie
08/16/25 8:58am
I've been driving the Outlander for several years, and resetting the tire pressure light is quite common. First, make sure all tire pressures meet the recommended values on the door label, usually between 30-35 PSI. Start the engine, sit in the driver's seat, and turn the key to the ON position (you don’t need to start the engine). Look around the lower left side of the steering wheel or the dashboard area for a small button labeled TPMS—that’s the reset button. Hold it down for about 5 to 10 seconds, and the tire pressure light will blink a few times before turning off. Release the button, and the reset is complete. If the light comes back on after driving a few hundred meters, it means the tire pressure is still unstable, and you should check for leaks or cold weather effects. Get into the habit of checking regularly to avoid trips to the repair shop. Driving safety is the top priority—don’t ignore it. Handling this yourself is pretty straightforward and doesn’t require any special skills.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

What are the types of new energy vehicle batteries?

New energy electric vehicle batteries can be broadly categorized into several major types, including lead-acid batteries, nickel-metal hydride batteries, lithium manganese oxide batteries, lithium iron phosphate batteries, and ternary lithium batteries. Vehicle Types: New energy vehicles refer to those that use unconventional vehicle fuels to provide power. They can be divided into four main categories: pure electric vehicles, hybrid electric vehicles, fuel cell electric vehicles, and other new energy electric vehicles. The advantage they offer is zero tailpipe emissions. New Energy Vehicle License Plates: Small new energy vehicle license plates feature a gradient green color, while large new energy vehicle license plates are yellow-green dual-colored. Compared to traditional vehicle license plates, new energy vehicle license plates have one additional digit, which helps effectively distinguish them and avoid duplication.
3
2
Share

What is the Difference Between Slow Charging and Fast Charging for New Energy Vehicles?

New energy vehicle fast charging and slow charging have the following differences: Different charging interfaces: Fast charging uses high-power DC charging and is the charging interface of DC charging piles. Slow charging refers to AC charging and is the charging interface of AC charging piles. Different charging methods: Fast charging converts the AC power from the grid into DC power and delivers it to the fast charging port of the electric vehicle, with the electricity directly entering the battery for charging. Slow charging inputs the AC power from the grid into the slow charging port of the electric vehicle, where the onboard charger converts the AC power into DC power before delivering it to the battery to complete charging. Different charging times: Fast charging can charge up to 80% of the battery capacity in as little as half an hour, while slow charging generally takes 6 to 8 hours to complete the process.
4
2
Share

Does a newly purchased car require an annual inspection?

A newly purchased car does not require an annual inspection. New cars are exempt from inspection for the first 6 years, but you need to go to the vehicle management office every 2 years to apply for a sticker and emblem. Normally, an annual inspection involves going to an inspection station for a vehicle check (lights, tires, emissions, etc.), and then obtaining the inspection emblem after the vehicle passes the inspection. However, new cars benefit from the "6-year exemption" policy, which essentially means that the vehicle inspection part is waived, and you can directly apply for the inspection emblem. Regulations: Operational passenger vehicles must be inspected once a year within the first 5 years; after 5 years, they must be inspected every 6 months. Trucks and large or medium-sized non-operational passenger vehicles must be inspected once a year within the first 10 years; after 10 years, they must be inspected once every 6 months. Small and mini non-operational passenger vehicles must be inspected once every 2 years within the first 6 years; after 6 years, once a year; and after 15 years, once every 6 months. Notes: The annual inspection is divided into two parts. The first part involves going to an inspection station for a vehicle check (lights, tires, emissions, etc.), while the second part is simply collecting the annual inspection emblem.
16
0
Share

Do New Energy Pure Electric Vehicles Have a Transmission?

Pure electric vehicles do not have a transmission. Most pure electric vehicles only have a reducer, which can reduce speed and increase torque, allowing the vehicle to operate normally. There is also no need for a transmission in pure electric vehicles, as their electric motors have a wide speed range and can directly adjust speed through the motor. Power Output: The power output method of pure electric vehicles is more suitable for stop-and-go urban roads, and these vehicles produce no exhaust emissions during operation. Onboard Power Source: Pure electric vehicles refer to vehicles that use an onboard power source as their power, drive the wheels with an electric motor, and meet all the requirements of road traffic and safety regulations.
5
1
Share

Can New Energy Vehicles Be Charged on Rainy Days?

New energy vehicles can be charged on rainy days. Many new energy vehicles now come with waterproof designs, especially for charging ports that are often not directly exposed to rainwater. Additionally, charging stations are designed to be rainproof, so charging can generally be done with confidence. Strict Standards: Charging stations also comply with national standards. Whether they are public charging stations from the State Grid or private charging stations installed by major operators for vehicle owners, they adhere to strict regulations. These include lightning protection, overload protection, short-circuit protection, and leakage protection. Precautions: Charging stations that meet national standards use insulating materials for their casings and have a protection rating of IP54, meaning they are generally unaffected by splashing rainwater. Moreover, charging stations are equipped with anti-leakage devices that will promptly trip and cut off power in the event of a leakage.
2
1
Share

What is the demand for nickel in new energy vehicles?

With the increase in nickel metal content in new energy vehicles, under the same conditions, the battery's range will be improved. Concept: Refers to various forms of energy other than traditional energy sources. It includes energy sources that are just beginning to be developed and utilized or are being actively researched and awaiting promotion, such as solar energy, geothermal energy, wind energy, ocean energy, biomass energy, and nuclear fusion energy. Characteristics: Abundant resources, generally with renewable characteristics, can be used sustainably by humans. Currently, except for hydropower, the development and utilization costs of renewable energy are higher than those of fossil fuels. Compared with traditional sulfide nickel ores, laterite nickel ores have richer resource reserves, higher grades, and lower mining difficulty. However, due to the complex composition of laterite nickel ores, the smelting technology requirements are high, making utilization difficult.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.