What is the method to reset the oil light on the 2019 Accord?

1 Answers
DiMaria
07/30/25 10:08am
2019 Accord oil light reset method: 1. Start the engine; 2. Press and hold the TRIP button without releasing it until the mileage and OILLIFE start flashing, then release the button; 3. Sometimes it is necessary to press and release the button several times to reset the maintenance light. The Accord is a mid-size car introduced by Honda Motor Co., Ltd. The dimensions of this car are 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm. From the side view of the car, the side waistline adopts a three-dimensional design, extending from the front face of the car to the rear, visually elongating the body length of the car.
Was this review help?
12
5
Share
More Forum Discussions

Where is the blower located in the Nissan Sylphy?

The blower of the Nissan Sylphy is located on the inner left side of the glove compartment in the front passenger seat. Reasons why the car blower does not rotate are as follows: Long-term use of the blower, excessive dust accumulation: This increases the friction coefficient between the rotor and the bearing, causing the rotor to be obstructed or even stuck, leading to overheating and damage of the coil. After disconnecting the power, open the rear cover of the blower and add a few drops of lubricating oil (such as sewing machine oil) into the bearing sleeves at both ends of the rotor. While adding oil, rotate the blades until they move freely, and the blower fault can be resolved. No 220V AC input or the coil is damaged: In this case, the power should be cut off. Disconnect the two lead wires of the blower from the power supply connection points and leave them suspended (ensure the two ends of the power wires do not touch each other to avoid a short circuit). Turn on the power and carefully measure both ends of the power wires with a test pen. If one end lights up and the other does not, it indicates the power input is normal, and the blower coil may be damaged. If both ends light up or neither lights up, it indicates an issue with the power input.
14
1
Share

What causes the abnormal noise when parking and shifting into reverse gear in a BMW N52B30?

The reasons for noise when shifting gears include the clutch not being fully depressed, loose linkage mechanism, severely worn clutch disc, damaged pressure plate, and incomplete gear engagement. Precautions when shifting into reverse gear are as follows: Ensure the vehicle is completely stopped before shifting into reverse: Shifting into reverse before the car has fully stopped is a bad habit many "experienced drivers" tend to have. While it may seem like skilled driving, it actually causes significant damage to the transmission. Most household cars do not have synchronizers for the reverse gear, so grinding gears is inevitable if reverse is engaged before the vehicle comes to a complete stop. Therefore, when shifting into reverse, make sure to firmly press the brake and stop the vehicle completely before engaging. Depress the clutch fully: When shifting gears, always depress the clutch pedal completely. Never shift into reverse while the clutch is still partially engaged, as this can also cause gear grinding. Additionally, be gentle when shifting into reverse and avoid using excessive force, as this can sometimes result in distressing gear collision sounds. Reverse slowly: Lastly, avoid reversing too quickly. Refrain from aggressively pressing the accelerator for rapid reverse acceleration, as this can cause significant damage to the straight-cut gears. Moreover, straight-cut gears transmit power very directly and have poor smoothness, so reversing at high speeds can make passengers feel very uncomfortable, and the noise is also unpleasant.
4
5
Share

What is the difference between Audi DTA and DKW?

Audi DTA and DKW differences: 1. Different dimensions: DTA measures 4858mm in length, 1847mm in width, and 1439mm in height; DKW measures 5038mm in length, 1886mm in width, and 1475mm in height. 2. Different maximum horsepower: Audi DTA has a maximum horsepower of 150ps, while DKW has a maximum horsepower of 252ps. Both Audi DTA and DKW are equipped with a 2.0L turbocharged engine, paired with a 7-speed wet dual-clutch transmission. Both models feature a five-link independent suspension system for the front and rear.
1
4
Share

What to Do When Audi Air Conditioning is Not Cooling?

Audi air conditioning not cooling solutions are: 1. Add refrigerant; 2. Replace the air conditioning flap; 3. Clean the air filter and filter screen. The functions of Audi air conditioning are: 1. Filter the air entering the cabin; 2. Absorb moisture in the air; 3. Keep the air clean and prevent bacterial growth; 4. Prevent glass fogging; 5. Adjust the cabin temperature. The reasons for Audi air conditioning not cooling are: 1. Lack of refrigerant; 2. Damaged air conditioning flap; 3. Loose drive belt of the car air conditioning compressor; 4. Blocked air filter and filter screen; 5. Water infiltration into the refrigeration system.
11
5
Share

Why did the Buick car's air conditioning suddenly stop cooling?

The reasons why the Buick car's air conditioning suddenly stops cooling are: 1. Lack of refrigerant; 2. Damaged air conditioning flap; 3. Loose drive belt of the car's air conditioning compressor; 4. Blocked air filter and filter screen; 5. Water infiltration into the refrigeration system. The solutions for the car's air conditioning suddenly stopping cooling are: 1. Add refrigerant; 2. Replace the air conditioning flap; 3. Clean the air filter and filter screen. The functions of the air conditioning: 1. Filter the air entering the cabin; 2. Adsorb moisture in the air; 3. Keep the air clean and prevent bacterial growth; 4. Prevent glass fogging; 5. Adjust the temperature of the cabin.
6
1
Share

Does every electronic eye capture wrong-way driving?

Electronic eyes have various functions: some capture red-light running, some capture wrong-way driving, some capture speeding, and others measure traffic flow. It depends on the purpose of the camera in that location. If it is not set up to capture wrong-way driving, it will not record it. Electronic police: These cameras are usually installed at intersections and monitor vehicles from the rear to detect violations such as running red lights, not following directional markings, illegal lane changes, crossing lines, wrong-way driving, and motor vehicles occupying non-motorized lanes. They capture these violations without any warning. Checkpoint cameras: These types of cameras are generally installed on national highways, provincial roads, and expressways to capture speeding vehicles. Their features include front-facing shots, high-definition images, and advanced optical and computer processing. If your face is captured, trying to have someone else take the penalty points for you will likely be detected. So, if you are caught violating traffic rules on expressways or national highways, do not attempt to have someone else take the penalty points for you.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.