What is the method to reset the maintenance light on Zotye Damai x5?

What to Do When an ETC Card Expires?

If your ETC card has expired, you need to apply for a replacement. The steps are as follows: 1. Bring the expired ETC card to the issuing bank; 2. Apply for reactivation of the ETC card by filling out an application form; 3. Once the application is approved, activate the ETC card. After successful activation, the card can be used normally. ETC is one of the service functions of the intelligent transportation system, suitable for use on highways or in busy bridge and tunnel environments. Advantages of the ETC system: 1. Improved service levels; 2. Convenient payment services, enhancing efficiency; 3. Lower emissions and environmental pollution; 4. More accurate recording of operational data; 5. Smoother highway passage; 6. Effective control of operational investments by traffic regulatory authorities.

5

4

Share

What are the hazards of gear skipping to the vehicle?

Reasonable gear skipping is acceptable and will not cause any adverse effects on the car. The specific reasons are as follows: 1. As long as it does not cause back-gearing (i.e., after upshifting, the gear is too high, the engine speed is too low, feeling acceleration obstruction often accompanied by body shaking, and in severe cases may even cause the engine to stall). 2. It does not cause dragging (i.e., after downshifting, the gear is too low, the mechanical force of the gear causes the vehicle to suddenly decelerate, like stepping on the brake). Extended content: 1. When decelerating for sharp turns, at higher speeds, you can decelerate before turning and directly shift from 5th or 4th gear to 3rd or 2nd gear, then turn at low speed. 2. After climbing a steep slope to the top, followed by a large downhill, you can directly shift from 1st or 2nd gear to 3rd or 4th gear, without giving throttle, and coast downhill in gear.

13

1

Share

What is the difference between the number 1 and the letter l on a license plate?

The difference between the number 1 and the letter l on a license plate: There is no need to distinguish between the number 1 and the letter l on a license plate, as the letter l is not allowed in domestic license plate numbers. This is similar to how the letter l is not allowed in license plate numbers and the letter 0 is not allowed in vehicle VIN codes, to prevent confusion between certain numbers and letters. Here is some related information: 1. A license plate is an essential item for a vehicle to legally drive on the road. If a vehicle is to be driven legally, it must display a license plate. Driving without a license plate is considered unlicensed driving, which is illegal. 2. There are permanent license plates and temporary license plates. Permanent license plates are made of metal and must be fixed to the front and rear of the vehicle using screws provided by the vehicle management office. Temporary license plates do not need to be fixed to the vehicle body; they are made of paper and must be affixed to the front and rear windshields of the vehicle.

18

1

Share

How to Turn Off the Electrical Consumption Display on Audi?

Audi electrical consumption display shutdown introduction: There are three fuel consumption displays on the Audi trip computer, which can be adjusted and turned off using the knob on the left side of the steering wheel. As the car is used, all parts will experience wear and tear. A dirty throttle body, excessive spark plug gap, and external factors such as tire pressure and driving wind resistance can affect consumption. Here are methods to reduce fuel consumption: 1. Check the air conditioning system in summer. Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance may require increasing fan speed and lowering temperature to achieve a comfortable effect. 2. Avoid frequent hard braking. Frequent hard braking is a primary reason for persistently high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Do not set the air conditioning too high in small-displacement vehicles. For cars exposed to the sun, avoid turning on the air conditioning immediately after entering. First, open the windows and set the fan to a higher speed without the air conditioning to expel the hot air inside. Wait until the car has cooled down moderately before turning on the air conditioning.

16

5

Share

How to Repair a Deformed License Plate?

If the license plate is slightly deformed, you can repair it yourself or take it to a repair shop. If the damage is severe, you will need to replace the plate. Whether repairing it yourself or at a shop, be careful not to damage the font or paint on the plate. If it cannot be repaired, visit the local vehicle management office, where you can usually receive a new plate within 3-5 working days. The steps to follow after a license plate is damaged are: 1. First, report to the police for official record. 2. Schedule an appointment for license plate replacement/reissuance, which can be done via the official website or WeChat public account. 3. Prepare the required documents for replacement/reissuance: the original and a copy of the vehicle owner's ID card, the vehicle registration certificate, and the 'Motor Vehicle License Plate Application Form'. 4. Bring all the documents and the damaged plate to the service window for verification. The damaged plate will be collected, and you will receive an acceptance receipt. 5. Take the acceptance receipt to the payment window to pay the fee. 6. Collect and install the new license plate.

6

2

Share

What Do the Warning Lights on the Car Dashboard Mean?

Dashboard warning lights may indicate issues such as parking sensor failure, excessive brake pad wear, engine oil pressure sensor malfunction, insufficient brake fluid, fuel cutoff system intervention, or other faults. The specific causes are analyzed below: 1. A triangle with an exclamation mark inside: This is the general fault indicator light, which illuminates under the following conditions: (1) Overheating of the dry dual-clutch transmission clutch. (2) Fuel cutoff system intervention or malfunction. (3) Parking sensor failure. (4) External light malfunction. (5) Engine oil pressure sensor malfunction. (6) Traction control system warning or failure. 2. A circle with parentheses and an exclamation mark inside: This is the brake system warning light, which illuminates in the following situations: (1) Some vehicles illuminate this light for a few seconds after turning on the ignition, then it turns off after starting the engine. (2) It lights up when the handbrake is engaged and turns off when released. (3) Low brake fluid level, which illuminates while driving. (4) Brake system malfunction. 3. A horizontal line under parentheses with an exclamation mark inside: This is the tire pressure monitoring warning light, which illuminates when the pressure in one of the vehicle's tires is too low.

8

4

Share

What is the method to reset the maintenance light on Zotye Damai x5?

What to Do When an ETC Card Expires?

What are the hazards of gear skipping to the vehicle?

What is the difference between the number 1 and the letter l on a license plate?

How to Turn Off the Electrical Consumption Display on Audi?

How to Repair a Deformed License Plate?

What Do the Warning Lights on the Car Dashboard Mean?

What Are the Reasons Why a Car Door Won't Lock?

What is the new policy for vehicle annual inspection?

What are the reasons for uneven left and right suspension height in the BMW 7 Series?

Why is the Wuling Capricorn rarely seen on the streets?