What is the method to reset the maintenance light on the Tiggo 3?
3 Answers
The method to reset the maintenance light on the Tiggo 3 is: 1. Turn off the key to ensure all dashboard lights are off; 2. Press and hold the maintenance light reset button; 3. Turn on the key to light up all dashboard lights, continue holding the button until the maintenance cycle indicator enters reset mode; 4. Release the maintenance reset button and press button A; 5. The indicator light will return to normal, and the maintenance light will be reset. Taking the 2020 manual fashion edition Tiggo 3 as an example, its body dimensions are: length 4420mm, width 1760mm, height 1670mm, wheelbase 2510mm, minimum ground clearance 190mm, and body weight 1358kg.
I remember when I used to drive a Tiggo 3, the maintenance light was always on. To reset it is quite simple: first turn off the engine, then turn the key to the ON position to light up the dashboard—make sure not to press the brake to start the car. Quickly press the MODE button on the steering wheel or the cruise control button three times, not too fast or too slow, and a menu will pop up on the dashboard. Select 'Maintenance Reset' and confirm. When I first bought the car, I often made mistakes, like starting the car while pressing the accelerator, and the menu wouldn’t appear. The maintenance light is a reminder to change the oil and filter. I once ignored it, and the engine sludge got so bad that the repair cost me thousands. Now I’ve developed the habit of checking the car’s condition every 5,000 kilometers to avoid small issues turning into big problems. Safe driving depends on the details—the manual has detailed steps, and if unsure, just ask the 4S shop for help; they can do it in ten seconds. In short, resetting the light is a small thing, but regular maintenance keeps the car running smoother and more fuel-efficient.
When repairing cars, it's common for Tiggo 3 owners to ask about the maintenance light issue. The reset method isn't complicated: with the engine off, turn to the ON position, quickly press the steering wheel button three times to enter the settings menu and select clear. Note that the operation intervals should be even—don't press too hastily to avoid mistakes. A common error is pressing the brake or accelerator, which leads to failure or entering other modes. After resetting, make sure to actually perform the maintenance; many people just clear the light without servicing, causing machine wear. Check the engine oil condition and brake fluid level to ensure the car's health. Safety first—small oversights like insufficient oil pressure can lead to accidents. Regular maintenance extends lifespan and saves money and hassle.
