What is the method to reset the maintenance light on the Qashqai?

[DeJaxson]

Method to reset the maintenance light on the Qashqai: 1. Turn the ignition switch to the ON position, keeping the vehicle in a stationary state; 2. Use the steering wheel's toggle buttons to switch the instrument display to the maintenance settings page; 3. Press and hold the TRIP RESET button for about 5 seconds to reset it, and the maintenance light will disappear. The Qashqai is the first product designed by Nissan's European Design Center, positioned between a compact SUV and a hatchback sedan. It is equipped with a 2.0L inline four-cylinder naturally aspirated engine, with dimensions of 4315mm in length, 1783mm in width, and 1606mm in height, and a wheelbase of 2630mm.

[ErinMarie]

Resetting the Qashqai maintenance light is actually quite simple, and I think it's something you can handle during your daily driving. First, find a safe place to park, engage the handbrake, and turn off the engine. Then, turn off the ignition switch to cut power to the entire system. Next, press and hold the small button on the dashboard, usually the trip reset button or a similar function key, which might be located on the left side of the steering wheel. After that, turn the ignition switch to the ON position without starting the engine. Continue holding the button for about 15 seconds, and observe the maintenance indicator light flashing a few times before resetting. This process might require two or three attempts, as button settings vary slightly between different models. I often do this for my Qashqai. After resetting the maintenance light, remember to note the current mileage to track the next service interval. The maintenance light mainly reminds you to change the oil and perform routine checks—don’t ignore it just because it’s a hassle. Regular maintenance can extend the engine's lifespan and save you money and time. If the light doesn’t turn off after the operation, it might be due to a button contact issue. It’s best to check the manual or visit a professional shop to inspect the circuit.

[MacEden]

Resetting the maintenance light for the Qashqai by yourself is quite practical and also a good way to learn some handy tips. After parking and turning off the engine, press and hold the TRIP button on the dashboard. Turn the key to the ON position while keeping the button pressed for 15 seconds until the light flashes, indicating completion. I enjoy DIY car maintenance, and this task only requires your fingers—no complex tools needed. Just make sure you press the correct button, as some Qashqai models have a specific button under the steering wheel. After resetting, don’t forget to check the engine status and test the battery voltage to ensure smooth system operation. The maintenance light indicates it’s time for an oil change at 5,000 or 10,000 km, and resetting allows the counter to start fresh. But don’t just reset the light—choose the right oil quality, as low-viscosity synthetic oil can improve engine efficiency. If it doesn’t work the first time, don’t rush to retry; take a break or watch owner tutorial videos online for guidance.

[IsabelAnn]

I've performed the Qashqai maintenance light reset a few times, and it's quite straightforward. The method is to turn off the engine and ignition switch, then press and hold the dashboard button while turning the ignition to the ON position, keeping it pressed until the light goes off. The first time I tried it in a parking lot, it took me just one minute to complete. After resetting the maintenance light, note down the mileage for reference at the next service interval. Remember to do this in good lighting to avoid mistakes. As you drive longer, you'll realize these small tasks are important as they remind you to change oil and perform maintenance on time. If unsuccessful, don't force it – just take it to the shop for repair.

[MacEverly]

Resetting the maintenance reminder light requires safety as the top priority. I always park on level ground and engage the handbrake before proceeding. Turn off the ignition, hold the reset button while switching to ON position, and maintain for 10-15 seconds until reset. Avoid performing this operation while driving or when the vehicle is unstable, as it can be dangerously distracting. The button location on Nissan Qashqai may vary by model year - mine is on the left-side steering wheel controls. After resetting, verify all warning lights function properly since the maintenance indicator doesn't just signal oil changes but reflects overall system health. Regular resets help prevent issues - I recommend manually inspecting electrical circuits every six months rather than waiting for the light. If the button malfunctions, it may indicate wiring degradation requiring professional service.