What is the method to reset the maintenance light on the new Ford Mondeo?

1 Answers
PaisleyLee
07/30/25 2:04am
Method to reset the maintenance light on the new Ford Mondeo: 1. Press the one-touch start button of the Mondeo to ignite the engine; 2. Click the SET button on the left side of the multifunction steering wheel to enter the settings; 3. Press the minus button on the right side of the steering wheel to clear the items displayed on the dashboard; 4. Press the OK button on the left side of the steering wheel to reset the Mondeo's maintenance light. The new Ford Mondeo is a mid-size car with dimensions of 4873 mm in length, 1852 mm in width, and 1470 mm in height, a wheelbase of 2850 mm, a fuel tank capacity of 62 liters, a trunk capacity of 516 liters, and a maximum trunk capacity of 986 liters.
Was this review help?
4
2
Share
More Forum Discussions

Are the negative terminals of new car batteries always loose?

The negative terminal of a new car battery should not be too loose, as excessive looseness can lead to poor contact and cause sudden power interruptions. Here are some battery maintenance measures: 1. Avoid leaving the air conditioning on when the engine is off: The air conditioning consumes a significant amount of power. Some drivers have the habit of not turning off the air conditioning before shutting down the engine, which causes the air conditioning to automatically start the next time the vehicle is turned on. This results in an instant high power load on the battery, leading to long-term damage. 2. Prevent battery discharge: To avoid battery discharge, pay special attention not to use the car's CD player, cigarette lighter, or other charging devices for extended periods while the engine is off, as this consumes a large amount of battery current. Discharging the battery can easily cause damage to it.
19
3
Share

What should be paid attention to when passing through an intersection without traffic lights at night?

When passing through an intersection without traffic lights at night, you should pay attention to the alternate use of high and low beams. When crossing the intersection, you must use the switching between high and low beams to alert vehicles on both sides of the intersection. The following are precautions for night driving: 1. Drive carefully: When driving at night, pay attention to avoid speeding, do not follow the car too closely, refuse to drive while fatigued, use the lights correctly, and never drive under the influence of alcohol. 2. Try to avoid overtaking: Night is not the same as daytime, the range of vision will become very poor, so try not to overtake. If you need to overtake, you can switch between high and low beams to prompt the car in front to slow down and make way for you, while paying attention to observe whether there are other vehicles in the rearview mirror to avoid other cars forcibly overtaking.
17
2
Share

Where is the car spark plug located?

Car spark plugs are installed on the side or top of the engine. In early models, spark plugs were connected to the distributor via ignition cables, but over the past decade, most passenger car engines have been modified to have the ignition coil directly connected to the spark plug. Spark plug working principle: The spark plug's ground electrode is connected to the metal shell, which is threaded into the engine block through the cylinder head. The insulator primarily serves to isolate the metal shell from the center electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the center electrode, it ionizes the medium between the center electrode and the ground electrode, generating a spark to ignite the air-fuel mixture in the cylinder. If a spark plug is damaged, it can directly cause issues such as ignition system leakage, increased fuel consumption, reduced power output, and most notably, difficulty in starting, affecting the vehicle's normal operation. Severe spark plug erosion—evidenced by pitting, damage, or melted electrodes at the spark plug tip—indicates that the spark plug is damaged and should be replaced.
4
1
Share

What is the bulb model of Zotye T300?

Zotye T300 bulb models: low beam is H7, high beam is H7, and fog light is H7. The following two points should be noted when replacing bulbs: 1. The engine must be turned off for 5 minutes before replacing the bulb. 2. Gloves and protective goggles are required. Use alcohol to wipe off fingerprints or grease on the outer surface of the lamp shell. Do not touch the glass surface of the bulb with bare hands to prevent fingerprints from contaminating the glass shell and shortening the bulb's lifespan. Car headlights, as the eyes of the car, are closely related to safe driving at night or in bad weather conditions. The use and maintenance of car lights cannot be ignored. The following are daily checks for car lights: 1. Check whether the functions of front running lights, low beam, high beam, light horn, front fog lights, turn signals, and hazard lights are normal. 2. Check the rear running lights, license plate lights, rear fog lights, brake lights (including the high-mounted brake light, totaling 3), reverse lights, rear turn signals, rear hazard lights, and trunk lights. 3. Check whether the functions of dashboard indicator lights, interior lights, air conditioning, radio, cigarette lighter, and door window lift indicator lights are intact. 4. Check whether the headlight beam is normal and adjust it if necessary.
3
4
Share

Do you need to bleed air when a car runs out of fuel?

After refueling a car that has run out of fuel, there is no need to bleed air. The vehicle's fuel system is equipped with a dedicated exhaust system. You can start the vehicle directly after refueling. Before ignition, turn the key to the "on" position, and the fuel pump will start working. Since the fuel pump is electric, if there is no fuel, the engine may not start immediately after refueling because there is air in the fuel line. If you refuel, turn the key to the "on" position, wait for a few dozen seconds, and then attempt to start the engine. Below is relevant information: If a car is running low on fuel on the highway, generally from the moment the warning light comes on until the engine stalls, the car can still travel at least 40 to 60 kilometers. On highways, there is typically a service area gas station approximately every 50 kilometers. Alternatively, you can exit at the nearest exit, where there is usually a gas station nearby. If the car stalls on the road, pull over to the shoulder, place a warning sign, and then call for roadside assistance while waiting for help.
20
0
Share

How often should iridium-platinum spark plugs be replaced?

Iridium-platinum spark plugs should be replaced after running 80,000-100,000 kilometers. Under normal maintenance conditions, automotive spark plugs should be replaced after 40,000 to 60,000 kilometers of driving. However, this may vary depending on the brand and engine type, so it is recommended to follow the user manual. The following standards can be referenced for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000-80,000 kilometers. Steps for replacing spark plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check for external debris such as leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires according to the firing order, and then secure the cover plate.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.