What is the method to reset the maintenance light on the Maxus G50?
4 Answers
Maxus G50 maintenance light can be manually reset using the black menu/confirm button on the left side of the steering wheel. Below is a relevant introduction to the Maxus G50: 1. Powertrain: Equipped with a 1.3-liter inline 3-cylinder turbocharged engine, paired with a 6-speed manual transmission, delivering a maximum power of 120KW, maximum horsepower of 163PS, and maximum torque of 230N·m. The maximum power is achieved at 5200rpm, and the maximum torque is available between 1800-4400rpm. The fuel delivery system utilizes multi-point fuel injection. 2. Exterior: The Maxus G50 is positioned as a mid-size MPV. In terms of body dimensions, it measures 4825x1825x1778mm in length, width, and height, with a wheelbase of 2800mm.
I'm a seasoned driver who uses the Maxus G50 for family purposes and often handles minor repairs myself. When the maintenance light comes on, it means it's time to change the oil, and the reset method is quite simple: After turning off the engine, turn the key to the ON position (without starting the engine), then press and hold the small button at the bottom right of the dashboard for 5 to 8 seconds until the maintenance light goes off. I just did this last month, and the steps are clearly outlined in the manual. But don’t forget to complete the actual maintenance first, like changing the oil or filter, otherwise resetting the light is pointless. If you drive for too long without maintenance, the engine can develop serious issues, such as increased fuel consumption or part failures. Once, I kept driving with the light on and later found out the brake pads were wearing out quickly. Doing it yourself can save some money—the key tools are just the key and that small button. Avoid complicated operations to prevent damaging the circuitry. Resetting it after each maintenance ensures everything stays clean and the reminder function works properly.
Resetting the Maxus G50 maintenance light essentially involves clearing the service reminder from the system. You need to turn off the vehicle, then turn the key to the ON position without pressing the brake pedal. At this point, press and hold the reset or Trip button on the instrument panel for a few seconds (about 5 seconds), and the light will automatically reset. This process essentially triggers a computer reset through a simple button command, signaling to the vehicle that maintenance has been completed and the mileage counter should start fresh. I recommend performing this reset only after completing an actual oil change or inspection; otherwise, if the light is reset without proper servicing, issues may still arise. Regular maintenance helps extend engine life and reduces the risk of breakdowns. The maintenance light is just a reminder tool, but ignoring it can lead to missed service intervals and higher repair costs. The steps are straightforward, and most owners can DIY, saving the hassle of waiting in line at the dealership.
When the Maxus G50 maintenance light comes on, it's time to take action. However, resetting the light should only be done after actual maintenance is completed. Here's a quick method: Turn off the car, then turn the key to the 'run' position without starting the engine. Locate and hold the instrument panel button for a few seconds until the light goes off. Remember, resetting only clears the system reminder - skipping oil changes or lubrication can be dangerous. A car is like a body; proper maintenance ensures safety. Neglecting it may lead to engine overheating or even bursting. The reset process is quick and takes just 2 minutes.
