What is the method to reset the maintenance light on the Great Wall Haval H6?

1 Answers
Keith
07/24/25 8:03pm
The method to reset the maintenance light on the Great Wall Haval H6 is as follows: 1. Turn off the ignition switch, press and hold both arrow buttons simultaneously, then turn on the ignition switch and release the two arrow buttons after 3 seconds; 2. The maintenance menu will appear, asking if you want to reset; 3. Press and hold the SET button for more than 3 seconds; 4. Press the MODE button; 5. Turn off the ignition switch to complete the reset. Taking the 2021 Haval H6 as an example, it belongs to the compact SUV category with body dimensions of length 4653mm, width 1886mm, height 1730mm, and a wheelbase of 2738mm. The Haval H6 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine delivering a maximum horsepower of 211PS, maximum power of 155kW, and maximum torque of 325Nm, paired with a dual-clutch transmission.
Was this review help?
1
0
Share
More Forum Discussions

What is the difference between C1 and C2 when learning to drive?

The differences between C1 and C2 when learning to drive are the types of vehicles allowed to drive, the difficulty of the test, the scope of learning, and the cost. C1 is a manual transmission small vehicle driver's license, which means you can drive both manual and automatic transmission vehicles. C2 is an automatic transmission small vehicle driver's license, which only allows you to drive automatic transmission small vehicles and not manual transmission vehicles. Drivers with a C1 license can drive all vehicle types under C1, C2, C3, and C4, while drivers with a C2 license can drive C2, C3, and C4 vehicle types. C1 driving is more difficult to learn and prone to mistakes during the test. C2 automatic transmission vehicles are simpler to learn and drive, resulting in a higher pass rate for the test compared to C1. C1 corresponds to manual transmission, where operations like gear shifting and clutch control are more complex, especially during hill starts or traffic light starts, which can easily cause the vehicle to stall. C2 corresponds to automatic transmission, which has no clutch pedal, only brake and accelerator pedals, eliminating concerns about stalling. The registration fee for C1 is lower than for C2. Since there are relatively fewer applicants for C2, there are fewer corresponding instructors and training vehicles. Automatic transmission vehicles are more expensive than manual transmission ones, have higher maintenance costs, and the repair costs for C2 training vehicles are also slightly higher.
17
3
Share

What are the dimensions (length, width, height) of the Mercedes-Benz GLC?

The dimensions (length, width, height) of the Mercedes-Benz GLC are 4661×1898×1644mm. Below is an introduction to the Mercedes-Benz GLC: Mercedes-Benz GLC Interior: The new GLC LWB version continues the current design, featuring an interior similar to the C-Class. It includes dual-barrel instrument clusters with red needles and target-ring patterns, wood-grain lacquered center console panels, and a 3-color adjustable ambient lighting system throughout the car. It is equipped with an 8.4-inch high-resolution color display and a 13.97 cm color multifunctional instrument screen, COMAND Online, voice control system (LINGUATRONIC), Mercedes me connectivity, and smartphone integration system. Mercedes-Benz GLC Powertrain: It is powered by differently tuned M274 2.0T engines, corresponding to the GLC260L and GLC300L models based on their tail badges. The transmission is matched with a 9AT gearbox. Introduction to Mercedes-Benz: A German automotive brand, the Mercedes three-pointed star has become one of the most famous car and brand logos in the world. Known for its high quality and comprehensive vehicle lineup, it currently mainly produces A-Class cars, C-Class cars (mid-range sedans and coupes), E-Class cars (high-end sedans and coupes), S-Class cars (luxury sedans and coupes), and G-Class vehicles (SUV off-road vehicles).
11
4
Share

Can China IV Vehicles Still Be Transferred After the Implementation of China VI?

China IV vehicles can still be transferred after the implementation of China VI. Below is relevant information about China VI: 1. Definition: China VI vehicles are those that meet the "Limits and Measurement Methods for Emissions from Light-duty Vehicles (China VI)" regulations. 2. Implementation Stages: The China VI emission standard is implemented in two phases: Phase 1, starting from July 1, 2020, all vehicles sold and registered must comply with the China VI A standard; Phase 2, starting from July 1, 2023, all vehicles sold and registered must comply with the China VI B standard. Some cities may implement the China VI emission standard for light-duty vehicles as early as January 1, 2019.
11
4
Share

Must the car loan be fully repaid for vehicle relocation?

Vehicle relocation requires the car loan to be fully repaid. Below is relevant information about vehicle relocation: 1. Required materials: Vehicle tracing number, vehicle license, registration certificate, original purchase invoice or transfer ticket, valuation sheet, original ID cards or temporary ID cards of both buyer and seller, transfer contract (for corporate accounts: affix a copy of the trustee's ID card) and copies (1 copy each of registration certificate, invoice, original owner's ID card, 2 copies of vehicle license, and 3 copies of buyer's ID card). 2. Required time: Retrieving the vehicle's records takes a certain amount of time, and completing all relocation procedures requires 5 working days.
4
0
Share

What are the reasons for jerky operation in a BMW Mini?

There are several reasons for jerky operation in a BMW Mini: Carbon buildup causing jerking: If the throttle body of the car has excessive carbon deposits, it is necessary to promptly visit the car's 4S shop or a repair shop to clean the throttle body, which can resolve the jerking issue when the car decelerates. Reduced fuel injection causing jerking: Engine ignition, air intake, and fuel injectors collectively determine fuel combustion and are also the source of the engine's power. At this time, if the air intake decreases, ignition weakens, or fuel injection reduces, the car's power will be insufficient, resulting in a jerking sensation.
14
3
Share

What are the differences between Audi A6 40 and 45?

Audi A6 40 and 45 differ in terms of power performance, tire size, etc. Here are the specific details: Power Performance: Both the 40/45 models are equipped with a 2.0T turbocharged engine, while the 55 model features a 4.0-liter V8 turbocharged gasoline engine, currently mainly used in the Audi A8L. The 40T, as the entry-level powertrain, offers a maximum output of 190 horsepower, 140 kW power, and 320 Nm torque. In contrast, the 45T provides a maximum output of 224 horsepower, 165 kW power, and 350 Nm torque. Additionally, the maximum torque RPM tuning differs between the two. The 40T ensures sufficient power for daily commuting, while the 45T offers more robust power assurance. Both models are paired with a 7DCT dual-clutch transmission. Despite the Audi A6L's large size, its fuel consumption ranges from 9-10L per 100 km. Tire Size and Wheel Design: As an entry-level model, the 40T comes with 225-55/R18 tires, and the base wheel features a somewhat plain 10-spoke design in a slightly white finish, which is relatively simple. The 45T/55T entry-level models share the same tire size as the 40T, but mid-to-high trims offer larger 245-45/R19 and 255-40/R20 tires with smoked black wheels. These upgrades significantly enhance both visual appeal and grip. However, the wider tires and lower aspect ratio inevitably lead to increased fuel consumption. Nevertheless, thanks to the improved grip, the mid-to-high trims of the 45T/55T deliver a superior driving experience.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.