What is the method to reset the maintenance light on the Great Wall Fengjun 5?
3 Answers
The method to reset the maintenance light on the Great Wall Fengjun 5 is: 1. Press the brake pedal of the Great Wall Fengjun 5; 2. Press and hold the set button located below the right side of the dashboard; 3. Turn the car key to the ON position without starting the engine; 4. When the dashboard lights up, release the set button; 5. Immediately press the set button three times in succession; 6. Then press the confirm button on the left side of the dashboard to complete the maintenance reset. Taking the 2021 Great Wall Fengjun 5 as an example, its body structure is a four-door, five-seat pickup truck with dimensions of 5395mm in length, 1800mm in width, 1740mm in height, and a wheelbase of 3350mm.
Hey, I'm a veteran owner of a Great Wall Wingle 5, and I'm quite familiar with resetting its maintenance light. The method is pretty simple: First, turn off the engine and remove the key to ensure it's completely stopped. Then, sit in the driver's seat and locate the reset button on the dashboard—usually the small trip meter reset button near the steering wheel. Press and hold it without releasing. Next, turn the key to the ON position without starting the engine. Watch the dashboard carefully—the maintenance light will blink a few times and turn off after about 5 to 10 seconds. At this point, release the button, and you're done. The key points are to operate in the engine-off state, or the button won't respond, and to patiently wait for the light to go off before releasing—letting go too soon might cause failure. After resetting, the maintenance indicator will stay quiet and won't keep reminding you, making driving more pleasant. If you don't reset it, the light stays on, making it easy to overlook real fault warnings and affecting driving judgment. I do this every six months during maintenance—fixed steps, done in under two minutes, saving both money and hassle. In short, don't skip it—doing it right once ensures your car runs longer with fewer issues.
I've been driving for over a decade and never take the maintenance light reset lightly—it's a matter of safety. Here are the reset steps for the Great Wall Wingle 5: First, turn off the engine and ignition. Then, press and hold the reset button on the dashboard (usually marked with a mileage indicator symbol). Next, turn the key to the ON position, preparing the engine to start but without ignition. Wait patiently for a few seconds until the maintenance light flashes several times and goes off before releasing the button. This records the completed maintenance in the system, and the indicator light won’t come on again. If you don’t reset it, the persistent light can distract you or lead to misjudging the vehicle’s condition; regular resets help maintain the accuracy of the reminder system. Always perform this operation with the engine off to avoid failure, and after success, check that the indicator is completely off. I make it a habit to do this after every maintenance—proper care extends the car’s lifespan. Such a simple routine can prevent major issues, like prolonging engine life and reducing breakdown risks on the road. Safety first—never overlook the details.
