
Geely Emgrand maintenance light reset method is: 1. With the ignition switch in the off position, press and hold the "Reset" button; 2. Turn on the ignition switch, then release the "Reset" button; 3. Press the "Clock Adjustment" button once, and the maintenance cycle will display a resetting status. Wait a few seconds until the display returns to normal view; 4. After the maintenance light is cleared, press the "Clock Adjustment" button four times consecutively, and the multifunction display will show the mileage until the next maintenance. Taking the Emgrand GS 2020 1.4T manual Yalife as an example: It is a compact SUV with a length, width, and height of 4440mm, 1833mm, and 1573mm respectively, a wheelbase of 2700mm, equipped with a 1.4T turbocharged engine, matched with a 6-speed manual transmission.

I've been driving a Geely Emgrand for several years, and the maintenance light reminds me when it's time to change the oil. The reset method is quite simple: first, turn off the engine, then press and hold the trip reset button on the dashboard without releasing it; next, turn the key to the ON position, which powers the car but doesn't start the engine; at this point, watch the dashboard—the maintenance light will flash, and after about 10-15 seconds, the light will go off, and you can release the button. I always check before driving, and after resetting, remember to perform the maintenance. Don't just focus on turning off the light because it indicates degraded oil quality. If you reset it without changing the oil, the car could develop issues. The lifespan of a car relies on regular maintenance. My advice is to check the oil condition monthly to avoid major repairs.

Dude, resetting the maintenance light on my Emgrand RS is super easy. After turning off the engine, hold down the small button on the dashboard (the one for adjusting the trip meter) and don’t let go. Then turn the key to the second position (ignition on), wait about 10 seconds until the light flashes and goes off, then release. Don’t delay maintenance when driving normally—the light means the oil is due for a change. Resetting just clears the reminder, so don’t slack off. I recommend noting the mileage after resetting and doing another service after driving about 5,000 km. Make sure the car is parked securely when doing this yourself, and don’t accidentally start the engine. A well-maintained car drives much smoother.

My Geely Emgrand has been running for quite a while, and I get nervous whenever the maintenance light comes on. Reset method: Turn off the engine; Hold down the trip button; Turn the power to the ON position, wait for the light to go out, then release. Be careful not to start the car, just power it on. After resetting, remember to change the oil, don't let the light stay on for too long, otherwise it will damage the engine. I always do regular maintenance to keep the car in good condition.


