What is the method to reset the maintenance light on the Chery Tiggo 3?

What does AUTO mean for car lights?

Car light AUTO refers to a system that automatically controls the turning on and off of lights based on environmental conditions, also known as automatic headlights, which is a system installed by car manufacturers for user convenience. When the car light is set to this position, the lights will automatically turn on when passing through tunnels or in dimly lit areas; when exiting the tunnel or when there is sufficient light, the lights will automatically turn off. Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of the car. They not only relate to the external image of a car owner but are also closely linked to safe driving at night or under bad weather conditions. Car headlights are categorized into halogen lamps, xenon lamps, LED lamps, laser lamps, etc.

16

4

Share

What car is represented by the letter 'b'?

A car represented by the letter 'b' is Bentley, a British high-end luxury brand. Its sedan models include the Flying Spur, Mulsanne, Arnage, and Bentayga, while its sports car models include the Continental. The Bentley Flying Spur is a luxury business car crafted by Bentley, a customized version of the Continental series, with interiors entirely handcrafted. In terms of power, the Flying Spur is equipped with a 6.0-liter W12 twin-turbocharged engine, delivering 635 horsepower and a maximum torque of 900 Nm, paired with an 8-speed dual-clutch transmission. For suspension, the Flying Spur uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear, both of which are common types of independent suspensions.

4

2

Share

What is the temperature resistance of automotive ABS plastic?

Automotive ABS plastic has a heat deflection temperature of 93~118°C, and the product can be increased by about 10°C after annealing treatment. ABS can still exhibit certain toughness at -40°C and can be used in the temperature range of -40~100°C. Below is a detailed introduction to automotive ABS plastic: 1. Overview: ABS plastic is a ternary copolymer of three monomers: acrylonitrile (A), butadiene (B), and styrene (S). The relative content of the three monomers can be varied arbitrarily to produce various resins. 2. Function: ABS plastic combines the common properties of the three components: A makes it resistant to chemical corrosion and heat, and gives it a certain surface hardness; B provides high elasticity and toughness; S gives it the processing and molding characteristics of thermoplastic and improves electrical properties.

18

4

Share

What is the principle of car steering?

The principle of car steering is that the steering wheel drives the steering gear, which in turn causes the rack and pinion steering mechanism to function, making the front tie rod swing left and right to create an angle in the front wheels, thereby achieving the steering effect. The car steering system is used to maintain or change the direction of the car's movement or reverse. The car steering system is divided into mechanical steering systems and power steering systems. The mechanical steering system mainly uses the driver's physical strength as the steering energy source and consists of the steering control system, steering gear, and steering transmission system. The power steering system uses both the driver's physical strength and the engine's power as the steering energy source, making it more convenient to use compared to the mechanical steering system.

2

1

Share

Is it necessary to replace the filter when changing transmission fluid?

When changing transmission fluid, it is essential to replace the filter. Failure to do so may allow contaminants to directly enter the transmission. Transmission fluid is a lubricant that maintains the cleanliness of the gear system, primarily ensuring proper transmission operation and extending the lifespan of the transmission components. Depending on transmission design, it is categorized into manual transmission and automatic transmission. The steps for changing transmission fluid are as follows: 1. Start the engine to warm up the transmission to operating temperature; 2. Remove the drain bolt; 3. After draining the old fluid, reinstall the bolt; 4. Add new ATF fluid; 5. Shift through gears from P to N, D, L1, L2, etc., pausing for at least 5 seconds in each gear; 6. Check if the automatic transmission fluid level is normal.

13

1

Share

What are the functions of the Volkswagen T-Roc?

Volkswagen Santana button functions are introduced as follows: 1. Electronic Stability Program (ESP): The system is enabled by default. It is not recommended to turn it off except on slippery surfaces such as rain or snow. 2. Hazard Warning Light: Commonly known as the double flash light, it should be turned on in emergencies to warn other vehicles and prevent rear-end collisions. 3. Volume Adjustment Button: Adjusts the multimedia volume and can also be used to skip tracks. 4. Parking Radar/Image: This button activates the panoramic image and radar function, providing alerts and visual feedback to help the driver detect surrounding obstacles. 5. Auto Hold: At traffic lights, the vehicle will not roll away after releasing the brake pedal. Pressing the accelerator again will allow the vehicle to continue moving forward.

6

5

Share

What is the method to reset the maintenance light on the Chery Tiggo 3?

What does AUTO mean for car lights?

What car is represented by the letter 'b'?

What is the temperature resistance of automotive ABS plastic?

What is the principle of car steering?

Is it necessary to replace the filter when changing transmission fluid?

What are the functions of the Volkswagen T-Roc?

Can a sunroof be tinted?

Which Camry Models Experience Engine Oil Burning?

What Causes Excessive Noise Inside the Car?

What Causes the Continuous Alarm Sound in Geely Boyue?