What is the method to reset the maintenance light on the Bora?

[BellaAnn]

Method to reset the maintenance light on the Bora: 1. Turn off the engine and rotate the key to lock the steering wheel; 2. Press and hold the "0.0/SET" button on the right side of the instrument panel with your left hand; 3. While keeping the right button pressed with your left hand, turn the key to the ignition position with your right hand (only to the point where the instrument panel lights up, not starting the engine); 4. A "wrench" symbol indicator will appear on the instrument panel and remain steady; 5. Release the left hand and press the button on the left side of the instrument panel once; 6. The wrench symbol will disappear, indicating the maintenance light has been successfully reset. The Bora is the first independently designed model by FAW-Volkswagen. In terms of body dimensions, it measures 4523mm in length, 1775mm in width, 1467mm in height, with a wheelbase of 2610mm.

[ElizabethFitz]

As a long-time Volkswagen Bora owner with over a decade of experience, I frequently help friends reset their maintenance reminder light. The procedure is quite straightforward: First, turn off the engine and ensure the key is in the 'off' position. Then, press and hold the small button marked '0.0' on the instrument cluster. Next, turn the ignition to the 'on' position without starting the engine. Wait for about 5 seconds until the light flashes or the dashboard displays a prompt, then release the button. Press the button once more to confirm the reset, and the light will turn off. The entire process takes less than a minute, and I've succeeded multiple times. Note that there might be slight variations depending on the model year – for example, the 2015 Bora requires an additional confirmation press. The maintenance light serves as a reminder for oil changes or routine checks, and resetting it establishes a new reminder cycle. If not reset promptly, the light may stay on, causing distraction or even misleading maintenance schedules. Regular maintenance is a good practice, and resetting the light ensures more accurate records.

[LeCole]

I'm also a Bora owner and recently learned how to reset the maintenance light, which is quite beginner-friendly. You need to locate the 0.0 button on the dashboard and hold it while the car is turned off; then turn on the ignition without pressing the accelerator or starting the engine; wait for the dashboard to blink a few times before releasing the button, then press it once more to complete. Pretty straightforward, right? I was a bit nervous the first time I did it, but found it effortless after succeeding. The maintenance light tracks service intervals - resetting it starts the count from zero, reminding you when the next service is due. Avoid forgetting to reset it, which could cause the light to stay on, affecting your mood or making you overlook real issues. By the way, make sure the car is parked safely before operating to prevent distractions.

[Tyrone]

When resetting the Bora maintenance light, safety comes first. I will operate after parking and turning off the engine: hold the 0.0 button, then turn the ignition switch to the 'on' position; release after a few seconds and press the prompt button to reset. The purpose is clear—to reset the maintenance cycle and avoid misleading. If not reset, the light may stay on, increasing driving risks. Remember to keep hands steady throughout the process and don't rush. Regular maintenance can extend the car's lifespan, and resetting ensures accurate reminders.