What is the method to reset the maintenance light on the Bestune X40?

[VanIsabel]

Bestune X40 maintenance light reset method: 1. Turn off the ignition switch; 2. Simultaneously press and hold the two arrow buttons, then turn on the ignition switch; 3. After approximately 3 seconds of the ignition switch being on, release the two arrow buttons; 4. At this point, the maintenance menu will appear on the display screen, asking if the maintenance should be reset; 5. Press and hold the SET button for more than 3 seconds; 6. Press the MODE button, turn off the ignition switch, and restart the car to reset the maintenance light. The Bestune X40 is positioned as a compact SUV, with body dimensions of 4310mm in length, 1780mm in width, and 1680mm in height, and a wheelbase of 2600mm.

[MacHarmony]

A few days ago, my car's maintenance light also came on, and it was quite easy to reset for the Bester X40. First step, don't start the engine, just turn the key to the ON position, where all the dashboard indicator lights come on. Then, focus on the central control screen, use the multifunction button on the right side of the steering wheel to scroll through the menu to find "Settings" or "Vehicle Information." Click into it, select "Maintenance Reminder," and hold the confirmation button on the steering wheel for 5 seconds—the light will go off. Remember, the maintenance light is reminding you to change the oil or check parts. After resetting, go to a professional shop for maintenance immediately; don't delay to avoid engine problems. If it's a new car and you haven't touched the buttons before, check the owner's manual for guidance as a backup. Doing it yourself usually saves money and hassle, but if you're unsure about the operation, don't force it—asking a 4S store technician is also a good idea.

[SebastianAnn]

I've been driving the Besturn X40 for half a year and have cleared the maintenance light twice. The specific operation is: After turning off the engine, turn the key to the ON position without starting the engine, use the small black button on the instrument panel to navigate the menu into the settings, select the maintenance reset option, and hold the confirm button until the light goes out. It's quite simple, though it took some time the first time. The maintenance light is mainly for your safety, indicating that it's time for maintenance, such as changing the oil, so don't ignore it. It's recommended to check every 5,000 kilometers. Resetting it yourself saves money, but make sure you actually perform the maintenance; otherwise, it could damage the car and increase fuel consumption. If the operation fails and the light remains on, try restarting or go to a repair shop to have the circuit checked.

[MacCorey]

To reset the maintenance reminder light on the Bestune X40, it's quite straightforward. Turn the key to the ON position without starting the engine, then use the steering wheel buttons to navigate to the menu, find the settings to reset the maintenance reminder, and hold for 3 seconds. Once the light goes off, you're good to drive. But don't take it lightly—the maintenance light is a system alert for an oil change or inspection. After resetting, make sure to service your vehicle promptly to protect the engine's lifespan. If you're unsure about the steps, check the owner's manual or look up tutorials online for a safer approach. Button locations may vary, but the method is similar. If the reset fails, it's best to pull over and avoid forcing it; recording a video and consulting your 4S shop is a wiser move.

[SanCalvin]

Last time the maintenance light came on in my Bestune X40, I tried the reset method: with the engine off and the key in the ON position, I used the small button on the dashboard to navigate the menu to the vehicle settings, selected the maintenance reset option, and held down the confirm button. The light went out immediately—super convenient. Just a reminder, the maintenance light is set for regular checks, like every 5,000 kilometers or six months. Resetting it doesn’t mean the maintenance is done; you still need to actually change the oil and filter to avoid bigger issues. The button operation is simple and suitable for beginners, but if you’re worried about making a mistake, try it with the engine off first. If it doesn’t reset, it might be a button issue that needs cleaning or the electrical system should be checked by a professional.

[MelanieAnn]

The BAIC X40 maintenance light reset is quite practical for saving trips to the shop. My personal method: Turn the ignition to ON, use the steering wheel controls to enter the system, select the maintenance item, press and hold the reset button until the light goes off. The whole process takes under a minute, but be precise with the steps to avoid incorrect settings. The maintenance light serves as a warning for oil change and servicing—don't delay maintenance after resetting, or it may lead to increased fuel consumption or part wear. I recommend regular DIY vehicle checks alongside this method. For tricky situations, refer to video guides or ask experienced driving friends for tips.