What is the method to reset the maintenance light on the Baojun RS5?

What procedures are required to install a siren on a private car?

Private cars are not allowed to install sirens. Unauthorized installation of sirens is a serious violation of the law. According to Article 97 of the "Road Traffic Safety Law of the People's Republic of China," illegal installation of sirens or warning lights will result in the traffic management department of the public security authorities forcibly removing and confiscating the devices, imposing a fine, but no penalty points. If such actions are used to deceive or extort others, it may lead to criminal liability. Automotive accessory shops that illegally sell or install sirens will be penalized by the industrial and commercial authorities for operating beyond their permitted scope once discovered. Additional information: According to Article 16 of the "Regulations on the Registration of Motor Vehicles" issued by the Ministry of Public Security: 1. Anti-collision devices: Small and mini passenger cars may install front and rear anti-collision devices; 2. Windshields, water tanks, toolboxes, spare tire racks: Freight motor vehicles may install windshields, water tanks, toolboxes, spare tire racks, etc.; 3. Interior decorations: Additional interior decorations may be added to motor vehicles.

16

1

Share

What to Do When a Gasoline Engine Fails to Start Due to Water Ingestion?

The reason a gasoline engine fails to start when water enters the cylinder is precisely due to the presence of water in the cylinder. To resolve this issue, remove the spark plug and pull the starter cord several times to expel the water. Once the water is cleared, reinstall the spark plug, and the engine should start. Ensure the fuel valve and ignition switch are turned off during this process to prevent fire hazards and electric shocks. For starting a car, the following steps should be taken: 1. Limit continuous starts to no more than 3 attempts: If the car fails to start, many owners tend to try repeatedly. In cold conditions, starting difficulties are common, and sometimes the engine may stall while driving. Each start attempt should last no longer than 5 seconds. If the car doesn't start after 3 attempts, wait a few minutes before trying again to avoid damaging the battery. 2. Engine operation: Turn on the radio and other electrical devices only after the engine is running. Before turning off the engine, shut down all electrical devices first. This is because, after the car is turned off at night, the battery continues to discharge. 3. After starting the car: Avoid rushing into high-speed driving. Allow a warm-up period, always start in the lowest gear, and gradually accelerate to let the car adapt. This practice can improve fuel efficiency.

3

Share

How to Turn on the Air Conditioning in Mitsubishi Outlander?

The central control area of the Mitsubishi Outlander has all the buttons for air conditioning adjustment, including dual-zone temperature control. Generally, you just need to press the AUTO button to activate the automatic air conditioning. More details about the air conditioning are as follows: 1. Filter: Regularly cleaning the surface of the condenser can significantly improve the cooling effect of the air conditioning system. The air conditioning filter should be replaced periodically because urban areas have a lot of dust and exhaust fumes, which can accumulate on the filter, breed bacteria, and cause a musty smell in the air conditioning. It is recommended to replace the filter once every year after spring. 2. Condenser: The condenser should also be cleaned regularly, and it is best to remove the radiator for a thorough cleaning. Running the air conditioning for extended periods is not advisable as it can cause wear and tear on the cooling system. If the interior temperature has reached a comfortable level, you can turn off the air conditioning and turn it back on after a while. When entering the car in summer, you should first open the windows for ventilation and turn on the external circulation to expel the hot air. After the interior temperature drops, switch to internal circulation, but avoid using it for too long. Therefore, you should alternate between internal and external circulation. Also, remember to turn off the air conditioning before shutting off the engine, which is beneficial for the sustainable operation of the engine.

20

1

Share

How to steer a front-narrow rear-wide steering wheel?

When the steering wheel is front-narrow and rear-wide, turn it towards the wider side to make that side narrower and prevent the other side from crossing the line. If the left side is wider, turning the steering wheel to the left will shift the car to the left. Adjust it to the appropriate position. The key is to observe the left rearview mirror. If it's front-wide and rear-narrow (forming a "V" shape from the front to the rear of the car), it means the left side is narrow, and you should turn the steering wheel to the right. If it's front-narrow and rear-wide (forming a "^" shape from the front to the rear of the car), it means the right side is narrow, and you should turn the steering wheel to the left. More details on steering are as follows: 1. Rear situation: Before reversing, check the rear situation, estimate the reversing path, and ensure the front of the car won't hit obstacles. Especially when turning the steering wheel sharply, the turning radius of the front wheels is larger than that of the rear wheels, causing the front of the car to swing outward more significantly during reversing. Be careful to avoid scraping the front. This method is more suitable for parking on the right side and when a longer reversing distance is needed. 2. Rear direction: If the rear needs to move to the right rear, turn the steering wheel to the right; conversely, turn it to the left. This is consistent with the steering operation when driving forward.

11

3

Share

How to eliminate the yellow engine light on a Sail?

The yellow engine light on a Sail indicates a fault in the engine, and it is necessary to promptly visit a 4S shop or repair shop to use a computer diagnostic tool to retrieve the fault code and identify the issue. Generally, it may be a fault with a certain sensor. Another possibility is a fault in the fuel system, which requires cleaning. Cleaning the engine mainly refers to cleaning the fuel system and the lubrication system. More details about the engine are as follows: 1. Fuel system: It primarily involves the mixing of gasoline and air to form a combustible mixture. Gasoline itself contains impurities, and there is dust in the air. After combustion under high temperature and pressure and oxidation with the atmosphere, carbon deposits are produced. If these carbon deposits are not cleaned in time, they can lead to various faults, such as difficulty in starting a cold engine, engine shaking, lack of engine power, increased fuel consumption, excessive exhaust emissions, and other adverse phenomena. 2. Lubrication system: If carbon deposits are not cleaned in time, they can cause various faults, such as blocking the lubrication oil passages in the engine, leading to dry friction in the engine, contaminating new engine oil, reducing the various performance characteristics of new oil, corroding metal, decreasing the engine's sealing performance, reducing cylinder pressure, increasing engine wear, and other faults.

7

3

Share

Where is the fuel filler cap switch on the BMW 320?

The fuel filler cap of the BMW 3 Series can be opened either by using the central locking button on the driver's door or by simply pressing the fuel filler cap. Additional information about the fuel tank is as follows: 1. Cleaning: The fuel tank can be cleaned using the Orff fuel system cleaning and protection agent, which removes deposits from the tank and fuel lines, as well as cleans the injector nozzles, restoring and maintaining optimal injection performance. This improves combustion efficiency and saves fuel. 2. Function: In addition to storing fuel, the fuel tank in the hydraulic system also serves to dissipate heat, separate air bubbles from the fuel, and settle impurities. The fuel tank is equipped with various auxiliary components, such as coolers, heaters, air filters, and liquid level gauges.

1

5

Share

What is the method to reset the maintenance light on the Baojun RS5?

What procedures are required to install a siren on a private car?

What to Do When a Gasoline Engine Fails to Start Due to Water Ingestion?

How to Turn on the Air Conditioning in Mitsubishi Outlander?

How to steer a front-narrow rear-wide steering wheel?

How to eliminate the yellow engine light on a Sail?

Where is the fuel filler cap switch on the BMW 320?

What is the correct way to listen to music while parked?

Can Toothpaste Remove Headlight Scratches?

Why does a car suddenly fail to start?

How does a car accelerate?