What is the method to reset the maintenance light on the 3008?
2 Answers
The method to reset the maintenance light on the 3008 is as follows: 1. Turn off the ignition switch of the Peugeot 3008. 2. Press and hold the maintenance mileage reset button. 3. Then press the one-touch start button, and the odometer display will begin the countdown. 4. When the display shows "=0", it means the maintenance indicator light has been successfully reset. 5. After releasing the reset button, the wrench symbol (maintenance indicator light) will turn off. Note that after performing the Peugeot 3008 maintenance light reset operation, when disconnecting the battery, you should first ensure the reset operation takes effect before disconnecting. Lock the Peugeot 3008 and wait approximately 5 minutes for the process to complete.
I've been driving a Peugeot 3008 for several years, and here's my go-to method for resetting the maintenance light: Get in the car, turn the key to the ON position without starting the engine, just make sure the dashboard lights up. Then press and hold the reset button next to the odometer, usually a small round button near the steering wheel. Keep holding it for about five to ten seconds until the wrench icon starts flashing or you hear a beep. Release the button, use the steering wheel controls to navigate to the maintenance menu, and confirm the reset. Once the light goes off, you're done. The procedure might vary for different model years, like post-2020 models requiring settings adjustment via the central screen. Regular reset ensures accurate reminders - I do it after every service to avoid forgetting oil changes that could harm the engine. DIY reset is convenient and cost-effective, plus it keeps the car running smoother and safer. Never slack on routine maintenance; I always remember this mantra: Reset the light when it's on, and your car stays young and strong.
