What is the method to reset the maintenance light on Landwind X7?
4 Answers
Hold the button on the end of the wiper stalk, and the SET message will appear on the instrument panel. Release the button and press it again. Wait until the number 5000 km appears on the screen, then release the button and turn off the vehicle. Restart the vehicle to complete the maintenance light reset for the Landwind X7.
Having driven the Landwind X7 for so long, the maintenance light coming on can be a headache, but don't worry, I'll tell you how to reset it. First, turn off the car completely and remove the key. Locate the small button on the dashboard labeled RESET or a similar symbol, press and hold it. Then, turn the key to the ON position (power on but engine not started), keep an eye on the dashboard, the maintenance light will flash a few times or the numbers will reset. Once the light goes off or the screen changes, release the button. The whole process takes about ten seconds. Remember to perform this after the actual maintenance to avoid false alerts. As a long-time owner, I recommend regular maintenance to keep your car durable—change the oil every six months to prevent engine wear. After resetting, you can drive with peace of mind. Always check your vehicle's condition to prevent small issues from becoming big problems; safety should always come first.
After working in car repair for a long time, resetting the maintenance light on a Landwind X7 is a piece of cake. Here's the simple procedure: Turn off the engine and all power, locate the reset button on the dashboard—usually a round button or small hole—and hold it down firmly. Then, turn the ignition to the ACC or ON position (just enough to light up the dashboard, but don’t start the engine). Hold for a few seconds until you see the maintenance indicator light flash or disappear from the screen, then release to complete the reset. I’ve seen many cases where owners mess up and trigger the light, so I always remind them to reset it right after maintenance for accuracy. Regular oil changes and brake system checks keep the car in good shape, reducing unnecessary light alerts. No fancy tools or computer needed—just a minute of DIY effort saves time and hassle.
When I first got my Landwind X7, the maintenance light came on and I was confused. Later, I figured out how to reset it. Simply put: Turn the car off completely and remove the key. Then press and hold the reset button on the dashboard—usually a small button on the side or bottom. Next, turn the key to the power-on position without starting the engine, and watch the dashboard display. Release the button when the light flashes or resets. Be patient; if it responds quickly, it’ll be done in 5 seconds. Learning this trick has many benefits—reset it right after maintenance to avoid hassle. Newbies like me are advised to check the manual first and practice. Once familiar, the operation becomes smoother. Safety first—never do this while driving.
